1 /* 2 * Copyright (C) 2010 Heiko Schocher <hs@denx.de> 3 * 4 * based on: 5 * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #ifndef __IMX27LITE_COMMON_CONFIG_H 24 #define __IMX27LITE_COMMON_CONFIG_H 25 26 /* 27 * SoC Configuration 28 */ 29 #define CONFIG_ARM926EJS /* arm926ejs CPU core */ 30 #define CONFIG_MX27 31 #define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ 32 #define CONFIG_SYS_HZ 1000 33 34 #define CONFIG_DISPLAY_BOARDINFO 35 #define CONFIG_DISPLAY_CPUINFO 36 37 #define CONFIG_SYS_TEXT_BASE 0xc0000000 38 39 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 40 #define CONFIG_SETUP_MEMORY_TAGS 1 41 #define CONFIG_INITRD_TAG 1 42 43 /* 44 * Lowlevel configuration 45 */ 46 #define SDRAM_ESDCFG_REGISTER_VAL(cas) \ 47 (ESDCFG_TRC(10) | \ 48 ESDCFG_TRCD(3) | \ 49 ESDCFG_TCAS(cas) | \ 50 ESDCFG_TRRD(1) | \ 51 ESDCFG_TRAS(5) | \ 52 ESDCFG_TWR | \ 53 ESDCFG_TMRD(2) | \ 54 ESDCFG_TRP(2) | \ 55 ESDCFG_TXP(3)) 56 57 #define SDRAM_ESDCTL_REGISTER_VAL \ 58 (ESDCTL_PRCT(0) | \ 59 ESDCTL_BL | \ 60 ESDCTL_PWDT(0) | \ 61 ESDCTL_SREFR(3) | \ 62 ESDCTL_DSIZ_32 | \ 63 ESDCTL_COL10 | \ 64 ESDCTL_ROW13 | \ 65 ESDCTL_SDE) 66 67 #define SDRAM_ALL_VAL 0xf00 68 69 #define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */ 70 #define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000 71 72 #define MPCTL0_VAL 0x1ef15d5 73 74 #define SPCTL0_VAL 0x043a1c09 75 76 #define CSCR_VAL 0x33f08107 77 78 #define PCDR0_VAL 0x120470c3 79 #define PCDR1_VAL 0x03030303 80 #define PCCR0_VAL 0xffffffff 81 #define PCCR1_VAL 0xfffffffc 82 83 #define AIPI1_PSR0_VAL 0x20040304 84 #define AIPI1_PSR1_VAL 0xdffbfcfb 85 #define AIPI2_PSR0_VAL 0x07ffc200 86 #define AIPI2_PSR1_VAL 0xffffffff 87 88 /* 89 * Memory Info 90 */ 91 /* malloc() len */ 92 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024) 93 /* memtest start address */ 94 #define CONFIG_SYS_MEMTEST_START 0xA0000000 95 #define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ 96 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 97 #define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ 98 #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ 99 100 /* 101 * Serial Driver info 102 */ 103 #define CONFIG_MXC_UART 104 #define CONFIG_MXC_UART_BASE UART1_BASE 105 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ 106 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 107 108 /* 109 * Flash & Environment 110 */ 111 #define CONFIG_ENV_IS_IN_FLASH 112 #define CONFIG_FLASH_CFI_DRIVER 113 #define CONFIG_SYS_FLASH_CFI 114 /* Use buffered writes (~10x faster) */ 115 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 116 /* Use hardware sector protection */ 117 #define CONFIG_SYS_FLASH_PROTECTION 1 118 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ 119 /* CS2 Base address */ 120 #define PHYS_FLASH_1 0xc0000000 121 /* Flash Base for U-Boot */ 122 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 123 #define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ 124 CONFIG_SYS_FLASH_SECT_SZ) 125 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 126 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ 127 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 128 /* Address and size of Redundant Environment Sector */ 129 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 130 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 131 132 /* 133 * Ethernet 134 */ 135 #define CONFIG_FEC_MXC 136 #define CONFIG_FEC_MXC_PHYADDR 0x1f 137 #define CONFIG_MII 138 139 /* 140 * MTD 141 */ 142 #define CONFIG_FLASH_CFI_MTD 143 #define CONFIG_MTD_DEVICE 144 145 /* 146 * NAND 147 */ 148 #define CONFIG_NAND_MXC 149 #define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 150 #define CONFIG_SYS_MAX_NAND_DEVICE 1 151 #define CONFIG_SYS_NAND_BASE 0xd8000000 152 #define CONFIG_JFFS2_NAND 153 #define CONFIG_MXC_NAND_HWECC 154 155 /* 156 * SD/MMC 157 */ 158 #define CONFIG_MMC 159 #define CONFIG_GENERIC_MMC 160 #define CONFIG_MXC_MMC 161 #define CONFIG_DOS_PARTITION 162 163 /* 164 * MTD partitions 165 */ 166 #define CONFIG_CMD_MTDPARTS 167 168 /* 169 * U-Boot general configuration 170 */ 171 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 172 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 173 /* Print buffer sz */ 174 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 175 sizeof(CONFIG_SYS_PROMPT) + 16) 176 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 177 /* Boot Argument Buffer Size */ 178 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 179 #define CONFIG_CMDLINE_EDITING 180 #define CONFIG_SYS_LONGHELP 181 182 /* 183 * U-Boot commands 184 */ 185 #include <config_cmd_default.h> 186 #define CONFIG_CMD_ASKENV 187 #define CONFIG_CMD_CACHE 188 #define CONFIG_CMD_DHCP 189 #define CONFIG_CMD_DIAG 190 #define CONFIG_CMD_FAT 191 #define CONFIG_CMD_JFFS2 192 #define CONFIG_CMD_MII 193 #define CONFIG_CMD_MMC 194 #define CONFIG_CMD_NAND 195 #define CONFIG_CMD_PING 196 197 #define CONFIG_BOOTDELAY 5 198 199 #define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ 200 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 201 202 #define xstr(s) str(s) 203 #define str(s) #s 204 205 #define CONFIG_EXTRA_ENV_SETTINGS \ 206 "netdev=eth0\0" \ 207 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 208 "nfsroot=${serverip}:${rootpath}\0" \ 209 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 210 "addip=setenv bootargs ${bootargs} " \ 211 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 212 ":${hostname}:${netdev}:off panic=1\0" \ 213 "addtty=setenv bootargs ${bootargs}" \ 214 " console=ttymxc0,${baudrate}\0" \ 215 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 216 "addmisc=setenv bootargs ${bootargs}\0" \ 217 "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 218 "kernel_addr_r=a0800000\0" \ 219 "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ 220 "rootpath=/opt/eldk-4.2-arm/arm\0" \ 221 "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ 222 "run nfsargs addip addtty addmtd addmisc;" \ 223 "bootm\0" \ 224 "bootcmd=run net_nfs\0" \ 225 "load=tftp ${loadaddr} ${u-boot}\0" \ 226 "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ 227 " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ 228 " +${filesize};cp.b ${fileaddr} " \ 229 xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ 230 "upd=run load update\0" \ 231 "mtdids=" MTDIDS_DEFAULT "\0" \ 232 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 233 234 /* additions for new relocation code, must be added to all boards */ 235 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 236 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ 237 GENERATED_GBL_DATA_SIZE) 238 #endif /* __IMX27LITE_COMMON_CONFIG_H */ 239