1 /*
2  * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
3  *
4  * based on:
5  * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22 
23 #ifndef __IMX27LITE_COMMON_CONFIG_H
24 #define __IMX27LITE_COMMON_CONFIG_H
25 
26 /*
27  * SoC Configuration
28  */
29 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
30 #define CONFIG_MX27
31 #define CONFIG_MX27_CLK32	32768		/* OSC32K frequency */
32 #define CONFIG_SYS_HZ		1000
33 
34 #define CONFIG_DISPLAY_BOARDINFO
35 #define CONFIG_DISPLAY_CPUINFO
36 
37 #define CONFIG_SYS_TEXT_BASE		0xc0000000
38 
39 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
40 #define CONFIG_SETUP_MEMORY_TAGS	1
41 #define CONFIG_INITRD_TAG		1
42 
43 /*
44  * Lowlevel configuration
45  */
46 #define SDRAM_ESDCFG_REGISTER_VAL(cas)	\
47 		(ESDCFG_TRC(10) |	\
48 		ESDCFG_TRCD(3) |	\
49 		ESDCFG_TCAS(cas) |	\
50 		ESDCFG_TRRD(1) |	\
51 		ESDCFG_TRAS(5) |	\
52 		ESDCFG_TWR |		\
53 		ESDCFG_TMRD(2) |	\
54 		ESDCFG_TRP(2) |		\
55 		ESDCFG_TXP(3))
56 
57 #define SDRAM_ESDCTL_REGISTER_VAL	\
58 		(ESDCTL_PRCT(0) |	\
59 		 ESDCTL_BL |		\
60 		 ESDCTL_PWDT(0) |	\
61 		 ESDCTL_SREFR(3) |	\
62 		 ESDCTL_DSIZ_32 |	\
63 		 ESDCTL_COL10 |		\
64 		 ESDCTL_ROW13 |		\
65 		 ESDCTL_SDE)
66 
67 #define SDRAM_ALL_VAL		0xf00
68 
69 #define SDRAM_MODE_REGISTER_VAL	0x33	/* BL: 8, CAS: 3 */
70 #define SDRAM_EXT_MODE_REGISTER_VAL	0x1000000
71 
72 #define MPCTL0_VAL	0x1ef15d5
73 
74 #define SPCTL0_VAL	0x043a1c09
75 
76 #define CSCR_VAL	0x33f08107
77 
78 #define PCDR0_VAL	0x120470c3
79 #define PCDR1_VAL	0x03030303
80 #define PCCR0_VAL	0xffffffff
81 #define PCCR1_VAL	0xfffffffc
82 
83 #define AIPI1_PSR0_VAL	0x20040304
84 #define AIPI1_PSR1_VAL	0xdffbfcfb
85 #define AIPI2_PSR0_VAL	0x07ffc200
86 #define AIPI2_PSR1_VAL	0xffffffff
87 
88 /*
89  * Memory Info
90  */
91 /* malloc() len */
92 #define CONFIG_SYS_MALLOC_LEN		(0x10000 + 512 * 1024)
93 /* memtest start address */
94 #define CONFIG_SYS_MEMTEST_START	0xA0000000
95 #define CONFIG_SYS_MEMTEST_END		0xA1000000	/* 16MB RAM test */
96 #define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
97 #define CONFIG_STACKSIZE	(256 * 1024)	/* regular stack */
98 #define PHYS_SDRAM_1		0xA0000000	/* DDR Start */
99 #define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
100 
101 /*
102  * Serial Driver info
103  */
104 #define CONFIG_MXC_UART
105 #define CONFIG_SYS_MX27_UART1
106 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
107 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
108 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
109 
110 /*
111  * Flash & Environment
112  */
113 #define CONFIG_ENV_IS_IN_FLASH
114 #define CONFIG_FLASH_CFI_DRIVER
115 #define CONFIG_SYS_FLASH_CFI
116 /* Use buffered writes (~10x faster) */
117 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
118 /* Use hardware sector protection */
119 #define CONFIG_SYS_FLASH_PROTECTION		1
120 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of flash banks */
121 /* CS2 Base address */
122 #define PHYS_FLASH_1			0xc0000000
123 /* Flash Base for U-Boot */
124 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
125 #define CONFIG_SYS_MAX_FLASH_SECT	(PHYS_FLASH_SIZE / \
126 		CONFIG_SYS_FLASH_SECT_SZ)
127 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
128 #define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
129 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
130 /* Address and size of Redundant Environment Sector	*/
131 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
132 #define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
133 
134 /*
135  * Ethernet
136  */
137 #define CONFIG_FEC_MXC
138 #define CONFIG_FEC_MXC_PHYADDR		0x1f
139 #define CONFIG_MII
140 #define CONFIG_NET_MULTI
141 
142 /*
143  * MTD
144  */
145 #define CONFIG_FLASH_CFI_MTD
146 #define CONFIG_MTD_DEVICE
147 
148 /*
149  * NAND
150  */
151 #define CONFIG_NAND_MXC
152 #define CONFIG_MXC_NAND_REGS_BASE	0xd8000000
153 #define CONFIG_SYS_MAX_NAND_DEVICE	1
154 #define CONFIG_SYS_NAND_BASE		0xd8000000
155 #define CONFIG_JFFS2_NAND
156 #define CONFIG_MXC_NAND_HWECC
157 #define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
158 
159 /*
160  * SD/MMC
161  */
162 #define CONFIG_MMC
163 #define CONFIG_GENERIC_MMC
164 #define CONFIG_MXC_MMC
165 #define CONFIG_DOS_PARTITION
166 
167 /*
168  * MTD partitions
169  */
170 #define CONFIG_CMD_MTDPARTS
171 
172 /*
173  * U-Boot general configuration
174  */
175 #define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
176 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
177 /* Print buffer sz */
178 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
179 		sizeof(CONFIG_SYS_PROMPT) + 16)
180 #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
181 /* Boot Argument Buffer Size */
182 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
183 #define CONFIG_CMDLINE_EDITING
184 #define CONFIG_SYS_LONGHELP
185 
186 /*
187  * U-Boot commands
188  */
189 #include <config_cmd_default.h>
190 #define CONFIG_CMD_ASKENV
191 #define CONFIG_CMD_CACHE
192 #define CONFIG_CMD_DHCP
193 #define CONFIG_CMD_DIAG
194 #define CONFIG_CMD_FAT
195 #define CONFIG_CMD_JFFS2
196 #define CONFIG_CMD_MII
197 #define CONFIG_CMD_MMC
198 #define CONFIG_CMD_NAND
199 #define CONFIG_CMD_PING
200 
201 #define CONFIG_BOOTDELAY	5
202 
203 #define CONFIG_LOADADDR		0xa0800000	/* loadaddr env var */
204 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
205 
206 #define xstr(s)	str(s)
207 #define str(s)	#s
208 
209 #define	CONFIG_EXTRA_ENV_SETTINGS					\
210 	"netdev=eth0\0"							\
211 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
212 		"nfsroot=${serverip}:${rootpath}\0"			\
213 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
214 	"addip=setenv bootargs ${bootargs} "				\
215 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
216 		":${hostname}:${netdev}:off panic=1\0"			\
217 	"addtty=setenv bootargs ${bootargs}"				\
218 		" console=ttymxc0,${baudrate}\0"			\
219 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
220 	"addmisc=setenv bootargs ${bootargs}\0"				\
221 	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
222 	"kernel_addr_r=a0800000\0"					\
223 	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
224 	"rootpath=/opt/eldk-4.2-arm/arm\0"				\
225 	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
226 		"run nfsargs addip addtty addmtd addmisc;"		\
227 		"bootm\0"						\
228 	"bootcmd=run net_nfs\0"					\
229 	"load=tftp ${loadaddr} ${u-boot}\0"				\
230 	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)		\
231 		" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)	\
232 		" +${filesize};cp.b ${fileaddr} "			\
233 		xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"		\
234 	"upd=run load update\0"						\
235 	"mtdids=" MTDIDS_DEFAULT "\0"					\
236 	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
237 
238 /* additions for new relocation code, must be added to all boards */
239 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
240 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
241 					GENERATED_GBL_DATA_SIZE)
242 #endif /* __IMX27LITE_COMMON_CONFIG_H */
243