xref: /openbmc/u-boot/include/configs/iconnect.h (revision b6409ec3)
1 /*
2  * (C) Copyright 2009-2012
3  * Wojciech Dubowik <wojciech.dubowik@neratec.com>
4  * Luka Perkov <luka@openwrt.org>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef _CONFIG_ICONNECT_H
10 #define _CONFIG_ICONNECT_H
11 
12 /*
13  * High level configuration options
14  */
15 #define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
16 #define CONFIG_KW88F6281		/* SOC Name */
17 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
18 
19 /*
20  * Machine type
21  */
22 #define CONFIG_MACH_TYPE	MACH_TYPE_ICONNECT
23 
24 /*
25  * Compression configuration
26  */
27 #define CONFIG_BZIP2
28 #define CONFIG_LZMA
29 #define CONFIG_LZO
30 
31 /*
32  * Commands configuration
33  */
34 #define CONFIG_SYS_NO_FLASH		/* declare no flash (NOR/SPI) */
35 #define CONFIG_SYS_MVFS
36 #define CONFIG_CMD_ENV
37 #define CONFIG_CMD_NAND
38 
39 /*
40  * mv-common.h should be defined after CMD configs since it used them
41  * to enable certain macros
42  */
43 #include "mv-common.h"
44 
45 /*
46  * Environment variables configuration
47  */
48 #ifdef CONFIG_CMD_NAND
49 #define CONFIG_ENV_IS_IN_NAND
50 #define CONFIG_ENV_SECT_SIZE	0x20000
51 #else
52 #define CONFIG_ENV_IS_NOWHERE
53 #endif
54 #define CONFIG_ENV_SIZE		0x20000
55 #define CONFIG_ENV_OFFSET	0x80000
56 
57 /*
58  * Default environment variables
59  */
60 #define CONFIG_BOOTCOMMAND \
61 	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
62 	"ubi part rootfs; "						\
63 	"ubifsmount ubi:rootfs; "					\
64 	"ubifsload 0x800000 ${kernel}; "				\
65 	"bootm 0x800000"
66 
67 #define CONFIG_MTDPARTS \
68 	"mtdparts=orion_nand:"		\
69 	"0x80000@0x0(uboot),"		\
70 	"0x20000@0x80000(uboot_env),"	\
71 	"-@0xa0000(rootfs)\0"
72 
73 #define CONFIG_EXTRA_ENV_SETTINGS \
74 	"console=console=ttyS0,115200\0"	\
75 	"mtdids=nand0=orion_nand\0"		\
76 	"mtdparts="CONFIG_MTDPARTS		\
77 	"kernel=/boot/uImage\0"			\
78 	"bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
79 
80 /*
81  * Ethernet driver configuration
82  */
83 #ifdef CONFIG_CMD_NET
84 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
85 #define CONFIG_PHY_BASE_ADR	11
86 #undef CONFIG_RESET_PHY_R
87 #endif /* CONFIG_CMD_NET */
88 
89 /*
90  * File system
91  */
92 #define CONFIG_CMD_JFFS2
93 #define CONFIG_CMD_UBIFS
94 #define CONFIG_RBTREE
95 #define CONFIG_MTD_DEVICE
96 #define CONFIG_MTD_PARTITIONS
97 #define CONFIG_CMD_MTDPARTS
98 
99 #endif /* _CONFIG_ICONNECT_H */
100