1 /* 2 * Copyright (C) 2011-2012 3 * Gerald Kerma <dreagle@doukki.net> 4 * Luka Perkov <luka@openwrt.org> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef _CONFIG_IB62x0_H 10 #define _CONFIG_IB62x0_H 11 12 /* 13 * High level configuration options 14 */ 15 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ 16 #define CONFIG_KW88F6281 /* SOC Name */ 17 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 18 19 /* Add target to build it automatically upon "make" */ 20 #define CONFIG_BUILD_TARGET "u-boot.kwb" 21 22 /* 23 * Compression configuration 24 */ 25 #define CONFIG_BZIP2 26 #define CONFIG_LZMA 27 28 /* 29 * Commands configuration 30 */ 31 #define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ 32 #define CONFIG_SYS_MVFS 33 #define CONFIG_CMD_IDE 34 35 /* 36 * mv-common.h should be defined after CMD configs since it used them 37 * to enable certain macros 38 */ 39 #include "mv-common.h" 40 41 /* 42 * Environment variables configuration 43 */ 44 #ifdef CONFIG_CMD_NAND 45 #define CONFIG_ENV_IS_IN_NAND 46 #define CONFIG_ENV_SECT_SIZE 0x20000 47 #else 48 #define CONFIG_ENV_IS_NOWHERE 49 #endif 50 #define CONFIG_ENV_SIZE 0x20000 51 #define CONFIG_ENV_OFFSET 0xe0000 52 53 /* 54 * Default environment variables 55 */ 56 #define CONFIG_BOOTCOMMAND \ 57 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 58 "ubi part root; " \ 59 "ubifsmount ubi:rootfs; " \ 60 "ubifsload 0x800000 ${kernel}; " \ 61 "ubifsload 0x700000 ${fdt}; " \ 62 "ubifsumount; " \ 63 "fdt addr 0x700000; fdt resize; fdt chosen; " \ 64 "bootz 0x800000 - 0x700000" 65 66 #define CONFIG_MTDPARTS \ 67 "mtdparts=orion_nand:" \ 68 "0xe0000@0x0(uboot)," \ 69 "0x20000@0xe0000(uboot_env)," \ 70 "-@0x100000(root)\0" 71 72 #define CONFIG_EXTRA_ENV_SETTINGS \ 73 "console=console=ttyS0,115200\0" \ 74 "mtdids=nand0=orion_nand\0" \ 75 "mtdparts="CONFIG_MTDPARTS \ 76 "kernel=/boot/zImage\0" \ 77 "fdt=/boot/ib62x0.dtb\0" \ 78 "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" 79 80 /* 81 * Ethernet driver configuration 82 */ 83 #ifdef CONFIG_CMD_NET 84 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 85 #define CONFIG_PHY_BASE_ADR 0 86 #undef CONFIG_RESET_PHY_R 87 #endif /* CONFIG_CMD_NET */ 88 89 /* 90 * SATA driver configuration 91 */ 92 #ifdef CONFIG_CMD_IDE 93 #define __io 94 #define CONFIG_IDE_PREINIT 95 #define CONFIG_DOS_PARTITION 96 #define CONFIG_MVSATA_IDE_USE_PORT0 97 #define CONFIG_MVSATA_IDE_USE_PORT1 98 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 99 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET 100 #endif /* CONFIG_CMD_IDE */ 101 102 /* 103 * RTC driver configuration 104 */ 105 #ifdef CONFIG_CMD_DATE 106 #define CONFIG_RTC_MV 107 #endif /* CONFIG_CMD_DATE */ 108 109 #endif /* _CONFIG_IB62x0_H */ 110