1 /* 2 * (C) Copyright 2015 Linaro 3 * 4 * Peter Griffin <peter.griffin@linaro.org> 5 * 6 * Configuration for HiKey 96boards CE. Parts were derived from other ARM 7 * configurations. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __HIKEY_H 13 #define __HIKEY_H 14 15 #include <linux/sizes.h> 16 17 #define CONFIG_POWER 18 #define CONFIG_POWER_HI6553 19 20 #define CONFIG_REMAKE_ELF 21 22 #define CONFIG_SUPPORT_RAW_INITRD 23 24 #define CONFIG_BOARD_EARLY_INIT_F 25 26 /* Physical Memory Map */ 27 28 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ 29 #define CONFIG_SYS_TEXT_BASE 0x35000000 30 31 #define CONFIG_NR_DRAM_BANKS 6 32 #define PHYS_SDRAM_1 0x00000000 33 34 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ 35 #define PHYS_SDRAM_1_SIZE 0x3EFFFFFF 36 37 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 38 39 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 40 41 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 42 43 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) 44 45 /* Generic Timer Definitions */ 46 #define COUNTER_FREQUENCY 19000000 47 48 /* Generic Interrupt Controller Definitions */ 49 #define GICD_BASE 0xf6801000 50 #define GICC_BASE 0xf6802000 51 52 /* Size of malloc() pool */ 53 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) 54 55 /* Serial port PL010/PL011 through the device model */ 56 #define CONFIG_PL01X_SERIAL 57 #define CONFIG_BAUDRATE 115200 58 59 #ifdef CONFIG_CMD_USB 60 #define CONFIG_USB_DWC2 61 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000 62 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/ 63 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO 64 65 #define CONFIG_USB_HOST_ETHER 66 #define CONFIG_USB_ETHER_SMSC95XX 67 #define CONFIG_USB_ETHER_ASIX 68 #define CONFIG_MISC_INIT_R 69 #endif 70 71 #define CONFIG_HIKEY_GPIO 72 73 /* SD/MMC configuration */ 74 #define CONFIG_GENERIC_MMC 75 #define CONFIG_HIKEY_DWMMC 76 #define CONFIG_BOUNCE_BUFFER 77 78 #define CONFIG_FS_EXT4 79 80 /* Command line configuration */ 81 #define CONFIG_CMD_UNZIP 82 #define CONFIG_CMD_ENV 83 84 #define CONFIG_MTD_PARTITIONS 85 86 /* BOOTP options */ 87 #define CONFIG_BOOTP_BOOTFILESIZE 88 89 #include <config_distro_defaults.h> 90 91 /* Initial environment variables */ 92 93 /* 94 * Defines where the kernel and FDT will be put in RAM 95 */ 96 97 /* Assume we boot with root on the seventh partition of eMMC */ 98 #define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw" 99 100 #define BOOT_TARGET_DEVICES(func) \ 101 func(USB, usb, 0) \ 102 func(MMC, mmc, 1) \ 103 func(DHCP, dhcp, na) 104 #include <config_distro_bootcmd.h> 105 106 #define CONFIG_EXTRA_ENV_SETTINGS \ 107 "kernel_name=Image\0" \ 108 "kernel_addr_r=0x00080000\0" \ 109 "fdtfile=hi6220-hikey.dtb\0" \ 110 "fdt_addr_r=0x02000000\0" \ 111 "fdt_high=0xffffffffffffffff\0" \ 112 "initrd_high=0xffffffffffffffff\0" \ 113 BOOTENV 114 115 /* Preserve environment on sd card */ 116 #define CONFIG_COMMAND_HISTORY 117 118 #define CONFIG_ENV_SIZE 0x1000 119 #define CONFIG_ENV_IS_IN_FAT 120 #define FAT_ENV_INTERFACE "mmc" 121 #define FAT_ENV_DEVICE_AND_PART "1:1" 122 #define FAT_ENV_FILE "uboot.env" 123 #define CONFIG_FAT_WRITE 124 #define CONFIG_ENV_VARS_UBOOT_CONFIG 125 126 /* Monitor Command Prompt */ 127 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 128 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 129 sizeof(CONFIG_SYS_PROMPT) + 16) 130 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 131 #define CONFIG_SYS_LONGHELP 132 #define CONFIG_CMDLINE_EDITING 133 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 134 135 #define CONFIG_SYS_NO_FLASH 136 137 #endif /* __HIKEY_H */ 138