1 /* 2 * (C) Copyright 2015 Linaro 3 * 4 * Peter Griffin <peter.griffin@linaro.org> 5 * 6 * Configuration for HiKey 96boards CE. Parts were derived from other ARM 7 * configurations. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __HIKEY_H 13 #define __HIKEY_H 14 15 #include <linux/sizes.h> 16 17 #define CONFIG_POWER 18 #define CONFIG_POWER_HI6553 19 20 #define CONFIG_REMAKE_ELF 21 22 #define CONFIG_SUPPORT_RAW_INITRD 23 24 /* Physical Memory Map */ 25 26 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ 27 28 #define CONFIG_NR_DRAM_BANKS 6 29 #define PHYS_SDRAM_1 0x00000000 30 31 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/ 32 #define PHYS_SDRAM_1_SIZE 0x3EFFFFFF 33 34 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 35 36 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 37 38 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) 39 40 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) 41 42 /* Generic Timer Definitions */ 43 #define COUNTER_FREQUENCY 19000000 44 45 /* Generic Interrupt Controller Definitions */ 46 #define GICD_BASE 0xf6801000 47 #define GICC_BASE 0xf6802000 48 49 /* Size of malloc() pool */ 50 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) 51 52 #ifdef CONFIG_CMD_USB 53 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000 54 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/ 55 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO 56 57 #define CONFIG_MISC_INIT_R 58 #endif 59 60 #define CONFIG_HIKEY_GPIO 61 62 /* SD/MMC configuration */ 63 #define CONFIG_BOUNCE_BUFFER 64 65 /* Command line configuration */ 66 67 #define CONFIG_MTD_PARTITIONS 68 69 /* BOOTP options */ 70 #define CONFIG_BOOTP_BOOTFILESIZE 71 72 #include <config_distro_defaults.h> 73 74 /* Initial environment variables */ 75 76 /* 77 * Defines where the kernel and FDT will be put in RAM 78 */ 79 80 #define BOOT_TARGET_DEVICES(func) \ 81 func(USB, usb, 0) \ 82 func(MMC, mmc, 1) \ 83 func(DHCP, dhcp, na) 84 #include <config_distro_bootcmd.h> 85 86 #define CONFIG_EXTRA_ENV_SETTINGS \ 87 "kernel_name=Image\0" \ 88 "kernel_addr_r=0x00080000\0" \ 89 "fdtfile=hi6220-hikey.dtb\0" \ 90 "fdt_addr_r=0x02000000\0" \ 91 "fdt_high=0xffffffffffffffff\0" \ 92 "initrd_high=0xffffffffffffffff\0" \ 93 BOOTENV 94 95 /* Preserve environment on sd card */ 96 #define CONFIG_ENV_SIZE 0x1000 97 #define CONFIG_ENV_VARS_UBOOT_CONFIG 98 99 /* Monitor Command Prompt */ 100 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 101 #define CONFIG_SYS_LONGHELP 102 #define CONFIG_CMDLINE_EDITING 103 #define CONFIG_SYS_MAXARGS 64 /* max command args */ 104 105 #endif /* __HIKEY_H */ 106