xref: /openbmc/u-boot/include/configs/highbank.h (revision ae03661f)
1 /*
2  * Copyright 2010-2011 Calxeda, Inc.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of the GNU General Public License as published by the Free
6  * Software Foundation; either version 2 of the License, or (at your option)
7  * any later version.
8  *
9  * This program is distributed in the hope it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program.  If not, see <http://www.gnu.org/licenses/>.
16  */
17 
18 #ifndef __CONFIG_H
19 #define __CONFIG_H
20 
21 #define CONFIG_L2_OFF
22 
23 #define CONFIG_SYS_NO_FLASH
24 #define CFG_HZ				1000
25 #define CONFIG_SYS_HZ			CFG_HZ
26 
27 #define CONFIG_OF_LIBFDT
28 #define CONFIG_FIT
29 #define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
30 
31 /*
32  * Size of malloc() pool
33  */
34 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
35 
36 #define CONFIG_PL011_SERIAL
37 #define CONFIG_PL011_CLOCK		150000000
38 #define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
39 #define CONFIG_CONS_INDEX		0
40 
41 #define CONFIG_BAUDRATE			38400
42 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
43 
44 #define CONFIG_MISC_INIT_R
45 #define CONFIG_SCSI_AHCI
46 #define CONFIG_SCSI_AHCI_PLAT
47 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
48 #define CONFIG_SYS_SCSI_MAX_LUN		1
49 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
50 					CONFIG_SYS_SCSI_MAX_LUN)
51 
52 #define CONFIG_DOS_PARTITION
53 
54 /*
55  * Command line configuration.
56  */
57 #include <config_cmd_default.h>
58 #undef CONFIG_CMD_NET
59 #undef CONFIG_CMD_NFS
60 
61 #define CONFIG_CMD_BDI
62 #define CONFIG_CMD_ELF
63 #define CONFIG_CMD_MEMORY
64 #define CONFIG_CMD_LOADS
65 #define CONFIG_CMD_SCSI
66 #define CONFIG_CMD_EXT2
67 
68 #define CONFIG_BOOTDELAY		2
69 /*
70  * Miscellaneous configurable options
71  */
72 #define CONFIG_CMDLINE_EDITING
73 #define CONFIG_AUTO_COMPLETE
74 #define CONFIG_SYS_LONGHELP		/* undef to save memory		 */
75 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
76 #define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
77 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
78 #define CONFIG_SYS_PROMPT		"Highbank #"
79 /* Print Buffer Size */
80 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
81 					 sizeof(CONFIG_SYS_PROMPT)+16)
82 
83 #define CONFIG_SYS_LOAD_ADDR		0x800000
84 
85 /*-----------------------------------------------------------------------
86  * Stack sizes
87  *
88  * The stack sizes are set up in start.S using the settings below
89  */
90 #define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
91 #ifdef CONFIG_USE_IRQ
92 #define CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
93 #define CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
94 #endif
95 
96 /*-----------------------------------------------------------------------
97  * Physical Memory Map
98  */
99 #define CONFIG_NR_DRAM_BANKS		1
100 #define PHYS_SDRAM_1_SIZE		(4089 << 20)
101 #define CONFIG_SYS_MEMTEST_START	0x100000
102 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)
103 
104 /* Room required on the stack for the environment data */
105 #define CONFIG_ENV_SIZE			0x2000
106 #define CONFIG_ENV_IS_NOWHERE
107 
108 #define CONFIG_SYS_SDRAM_BASE		0x00000000
109 #define CONFIG_SYS_TEXT_BASE		0x00001000
110 #define CONFIG_SYS_INIT_SP_ADDR		0x01000000
111 #define CONFIG_SKIP_LOWLEVEL_INIT
112 
113 #endif
114