1 /* 2 * Copyright 2010-2011 Calxeda, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_SYS_DCACHE_OFF 11 #define CONFIG_L2_OFF 12 #define CONFIG_SYS_THUMB_BUILD 13 14 #define CONFIG_SYS_NO_FLASH 15 16 #define CONFIG_OF_LIBFDT 17 #define CONFIG_OF_BOARD_SETUP 18 #define CONFIG_FIT 19 #define CONFIG_SUPPORT_RAW_INITRD 20 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) 21 22 #define CONFIG_SYS_TIMER_RATE (150000000/256) 23 #define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4) 24 #define CONFIG_SYS_TIMER_COUNTS_DOWN 25 26 /* 27 * Size of malloc() pool 28 */ 29 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) 30 31 #define CONFIG_PL011_SERIAL 32 #define CONFIG_PL011_CLOCK 150000000 33 #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } 34 #define CONFIG_CONS_INDEX 0 35 36 #define CONFIG_BAUDRATE 115200 37 38 #define CONFIG_BOOTCOUNT_LIMIT 39 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD 40 #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ 41 #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c 42 43 #define CONFIG_MISC_INIT_R 44 #define CONFIG_LIBATA 45 #define CONFIG_SCSI_AHCI 46 #define CONFIG_SCSI_AHCI_PLAT 47 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 48 #define CONFIG_SYS_SCSI_MAX_LUN 1 49 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 50 CONFIG_SYS_SCSI_MAX_LUN) 51 52 #define CONFIG_DOS_PARTITION 53 #define CONFIG_EFI_PARTITION 54 55 #define CONFIG_CALXEDA_XGMAC 56 57 /* PXE support */ 58 #define CONFIG_BOOTP_PXE 59 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 60 #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank" 61 62 /* 63 * Command line configuration. 64 */ 65 #include <config_cmd_default.h> 66 67 #define CONFIG_CMD_BDI 68 #define CONFIG_CMD_BOOTZ 69 #define CONFIG_CMD_DHCP 70 #define CONFIG_CMD_ELF 71 #define CONFIG_CMD_MEMORY 72 #define CONFIG_CMD_LOADS 73 #define CONFIG_CMD_SCSI 74 #define CONFIG_CMD_EXT2 75 #define CONFIG_CMD_EXT4 76 #define CONFIG_CMD_FAT 77 #define CONFIG_CMD_PXE 78 #define CONFIG_MENU 79 80 #define CONFIG_BOOTDELAY 2 81 #define CONFIG_BOOT_RETRY_TIME -1 82 #define CONFIG_RESET_TO_RETRY 83 #define CONFIG_AUTOBOOT_KEYED 84 #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay 85 #define CONFIG_AUTOBOOT_KEYED_CTRLC 86 /* 87 * Miscellaneous configurable options 88 */ 89 #define CONFIG_CMDLINE_EDITING 90 #define CONFIG_AUTO_COMPLETE 91 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 92 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 93 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 94 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 95 #define CONFIG_SYS_PROMPT "Highbank #" 96 #define CONFIG_SYS_HUSH_PARSER 97 /* Print Buffer Size */ 98 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 99 sizeof(CONFIG_SYS_PROMPT)+16) 100 101 #define CONFIG_SYS_LOAD_ADDR 0x800000 102 #define CONFIG_SYS_64BIT_LBA 103 104 105 /*----------------------------------------------------------------------- 106 * Physical Memory Map 107 */ 108 #define CONFIG_NR_DRAM_BANKS 1 109 #define PHYS_SDRAM_1_SIZE (4089 << 20) 110 #define CONFIG_SYS_MEMTEST_START 0x100000 111 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000) 112 113 /* Environment data setup 114 */ 115 #define CONFIG_ENV_IS_IN_NVRAM 116 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ 117 #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ 118 #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */ 119 #define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR 120 121 #define CONFIG_SYS_SDRAM_BASE 0x00000000 122 #define CONFIG_SYS_TEXT_BASE 0x00008000 123 #define CONFIG_SYS_INIT_SP_ADDR 0x01000000 124 #define CONFIG_SKIP_LOWLEVEL_INIT 125 126 #endif 127