1 /* 2 * Copyright 2010-2011 Calxeda, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #include <config_distro_defaults.h> 11 12 #define CONFIG_SYS_DCACHE_OFF 13 14 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) 15 16 #define CONFIG_SYS_TIMER_RATE (150000000/256) 17 #define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4) 18 #define CONFIG_SYS_TIMER_COUNTS_DOWN 19 20 /* 21 * Size of malloc() pool 22 */ 23 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) 24 25 #define CONFIG_PL011_SERIAL 26 #define CONFIG_PL011_CLOCK 150000000 27 #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } 28 #define CONFIG_CONS_INDEX 0 29 30 #define CONFIG_BAUDRATE 115200 31 32 #define CONFIG_BOOTCOUNT_LIMIT 33 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD 34 #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ 35 #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c 36 37 #define CONFIG_MISC_INIT_R 38 #define CONFIG_LIBATA 39 #define CONFIG_SCSI_AHCI 40 #define CONFIG_SCSI_AHCI_PLAT 41 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 42 #define CONFIG_SYS_SCSI_MAX_LUN 1 43 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 44 CONFIG_SYS_SCSI_MAX_LUN) 45 46 #define CONFIG_CALXEDA_XGMAC 47 48 /* 49 * Command line configuration. 50 */ 51 #define CONFIG_SCSI 52 53 #define CONFIG_BOOT_RETRY_TIME -1 54 #define CONFIG_RESET_TO_RETRY 55 56 /* 57 * Miscellaneous configurable options 58 */ 59 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 60 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 61 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 62 /* Print Buffer Size */ 63 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 64 sizeof(CONFIG_SYS_PROMPT)+16) 65 66 #define CONFIG_SYS_LOAD_ADDR 0x800000 67 #define CONFIG_SYS_64BIT_LBA 68 69 /*----------------------------------------------------------------------- 70 * Physical Memory Map 71 * The DRAM is already setup, so do not touch the DT node later. 72 */ 73 #define CONFIG_NR_DRAM_BANKS 0 74 #define PHYS_SDRAM_1_SIZE (4089 << 20) 75 #define CONFIG_SYS_MEMTEST_START 0x100000 76 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000) 77 78 /* Environment data setup 79 */ 80 #define CONFIG_ENV_IS_IN_NVRAM 81 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ 82 #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ 83 #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */ 84 #define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR 85 86 #define CONFIG_SYS_SDRAM_BASE 0x00000000 87 #define CONFIG_SYS_TEXT_BASE 0x00008000 88 #define CONFIG_SYS_INIT_SP_ADDR 0x01000000 89 #define CONFIG_SKIP_LOWLEVEL_INIT 90 91 #endif 92