1 /* 2 * Copyright 2010-2011 Calxeda, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 #define CONFIG_SYS_DCACHE_OFF 11 #define CONFIG_SYS_THUMB_BUILD 12 13 #define CONFIG_SYS_NO_FLASH 14 15 #define CONFIG_OF_LIBFDT 16 #define CONFIG_OF_BOARD_SETUP 17 #define CONFIG_FIT 18 #define CONFIG_SUPPORT_RAW_INITRD 19 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) 20 21 #define CONFIG_SYS_TIMER_RATE (150000000/256) 22 #define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4) 23 #define CONFIG_SYS_TIMER_COUNTS_DOWN 24 25 /* 26 * Size of malloc() pool 27 */ 28 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) 29 30 #define CONFIG_PL011_SERIAL 31 #define CONFIG_PL011_CLOCK 150000000 32 #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } 33 #define CONFIG_CONS_INDEX 0 34 35 #define CONFIG_BAUDRATE 115200 36 37 #define CONFIG_BOOTCOUNT_LIMIT 38 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD 39 #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ 40 #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c 41 42 #define CONFIG_MISC_INIT_R 43 #define CONFIG_LIBATA 44 #define CONFIG_SCSI_AHCI 45 #define CONFIG_SCSI_AHCI_PLAT 46 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5 47 #define CONFIG_SYS_SCSI_MAX_LUN 1 48 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 49 CONFIG_SYS_SCSI_MAX_LUN) 50 51 #define CONFIG_DOS_PARTITION 52 #define CONFIG_EFI_PARTITION 53 54 #define CONFIG_CALXEDA_XGMAC 55 56 /* PXE support */ 57 #define CONFIG_BOOTP_PXE 58 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 59 #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank" 60 61 /* 62 * Command line configuration. 63 */ 64 #include <config_cmd_default.h> 65 66 #define CONFIG_CMD_BDI 67 #define CONFIG_CMD_BOOTZ 68 #define CONFIG_CMD_DHCP 69 #define CONFIG_CMD_ELF 70 #define CONFIG_CMD_MEMORY 71 #define CONFIG_CMD_LOADS 72 #define CONFIG_CMD_SCSI 73 #define CONFIG_CMD_EXT2 74 #define CONFIG_CMD_EXT4 75 #define CONFIG_CMD_FAT 76 #define CONFIG_CMD_PXE 77 #define CONFIG_MENU 78 79 #define CONFIG_BOOTDELAY 2 80 #define CONFIG_BOOT_RETRY_TIME -1 81 #define CONFIG_RESET_TO_RETRY 82 #define CONFIG_AUTOBOOT_KEYED 83 #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay 84 #define CONFIG_AUTOBOOT_KEYED_CTRLC 85 /* 86 * Miscellaneous configurable options 87 */ 88 #define CONFIG_CMDLINE_EDITING 89 #define CONFIG_AUTO_COMPLETE 90 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 91 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 92 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 93 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 94 #define CONFIG_SYS_PROMPT "Highbank #" 95 #define CONFIG_SYS_HUSH_PARSER 96 /* Print Buffer Size */ 97 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 98 sizeof(CONFIG_SYS_PROMPT)+16) 99 100 #define CONFIG_SYS_LOAD_ADDR 0x800000 101 #define CONFIG_SYS_64BIT_LBA 102 103 104 /*----------------------------------------------------------------------- 105 * Physical Memory Map 106 */ 107 #define CONFIG_NR_DRAM_BANKS 1 108 #define PHYS_SDRAM_1_SIZE (4089 << 20) 109 #define CONFIG_SYS_MEMTEST_START 0x100000 110 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000) 111 112 /* Environment data setup 113 */ 114 #define CONFIG_ENV_IS_IN_NVRAM 115 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ 116 #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ 117 #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */ 118 #define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR 119 120 #define CONFIG_SYS_SDRAM_BASE 0x00000000 121 #define CONFIG_SYS_TEXT_BASE 0x00008000 122 #define CONFIG_SYS_INIT_SP_ADDR 0x01000000 123 #define CONFIG_SKIP_LOWLEVEL_INIT 124 125 #endif 126