1 /* 2 * iPAQ h2200 board configuration 3 * 4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #define CONFIG_MACH_TYPE MACH_TYPE_H2200 13 14 #define CONFIG_CPU_PXA25X 1 15 #define CONFIG_BOARD_H2200 16 17 #define CONFIG_NR_DRAM_BANKS 1 18 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ 19 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 20 21 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 22 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE 23 24 #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 25 26 #define CONFIG_ENV_SIZE 0x00040000 27 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) 28 29 #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ 30 31 /* 32 * iPAQ 1st stage bootloader loads 2nd stage bootloader 33 * at address 0xa0040000 but bootloader requires header 34 * which is 0x1000 long. 35 * 36 * --- Header begin --- 37 * .word 0xea0003fe ; b 0x1000 38 * 39 * .org 0x40 40 * .ascii "ECEC" 41 * 42 * .org 0x1000 43 * --- Header end --- 44 */ 45 46 #define CONFIG_SYS_TEXT_BASE 0xa0041000 47 48 /* 49 * Static chips 50 */ 51 52 #define CONFIG_SYS_MSC0_VAL 0x246c7ffc 53 #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 54 #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 55 56 /* 57 * PCMCIA and CF Interfaces 58 */ 59 60 #define CONFIG_SYS_MECR_VAL 0x00000000 61 #define CONFIG_SYS_MCMEM0_VAL 0x00000000 62 #define CONFIG_SYS_MCMEM1_VAL 0x00000000 63 #define CONFIG_SYS_MCATT0_VAL 0x00000000 64 #define CONFIG_SYS_MCATT1_VAL 0x00000000 65 #define CONFIG_SYS_MCIO0_VAL 0x00000000 66 #define CONFIG_SYS_MCIO1_VAL 0x00000000 67 68 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 69 #define CONFIG_SYS_SXCNFG_VAL 0x00040004 70 71 #define CONFIG_SYS_MDREFR_VAL 0x0099E018 72 #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB 73 #define CONFIG_SYS_MDMRS_VAL 0x00220022 74 75 #define CONFIG_SYS_PSSR_VAL 0x00000000 76 #define CONFIG_SYS_CKEN 0x00004840 77 #define CONFIG_SYS_CCCR 0x00000161 78 79 /* 80 * GPIOs 81 */ 82 83 #define CONFIG_SYS_GPSR0_VAL 0x01000000 84 #define CONFIG_SYS_GPSR1_VAL 0x00000000 85 #define CONFIG_SYS_GPSR2_VAL 0x00010000 86 87 #define CONFIG_SYS_GPCR0_VAL 0x00000000 88 #define CONFIG_SYS_GPCR1_VAL 0x00000000 89 #define CONFIG_SYS_GPCR2_VAL 0x00000000 90 91 #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00 92 #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83 93 #define CONFIG_SYS_GPDR2_VAL 0x000157FF 94 95 #define CONFIG_SYS_GAFR0_L_VAL 0x80401000 96 #define CONFIG_SYS_GAFR0_U_VAL 0x00000112 97 #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550 98 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA 99 #define CONFIG_SYS_GAFR2_L_VAL 0x20000000 100 #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 101 102 /* 103 * Serial port 104 */ 105 #define CONFIG_FFUART 106 #define CONFIG_CONS_INDEX 3 107 108 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } 109 110 #define CONFIG_SETUP_MEMORY_TAGS 111 #define CONFIG_CMDLINE_TAG 112 #define CONFIG_INITRD_TAG 113 114 /* Monitor Command Prompt */ 115 116 #define CONFIG_USB_DEV_PULLUP_GPIO 33 117 /* USB VBUS GPIO 3 */ 118 119 #define CONFIG_BOOTCOMMAND \ 120 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ 121 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ 122 "source :script ; " \ 123 "bootm ; " 124 125 #define CONFIG_USB_GADGET_PXA2XX 126 #define CONFIG_USB_ETH_SUBSET 127 128 #define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01" 129 #define CONFIG_EXTRA_ENV_SETTINGS \ 130 "stdin=serial\0" \ 131 "stdout=serial\0" \ 132 "stderr=serial\0" 133 134 #endif /* __CONFIG_H */ 135