1 /* 2 * iPAQ h2200 board configuration 3 * 4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #define MACH_TYPE_H2200 341 13 #define CONFIG_MACH_TYPE MACH_TYPE_H2200 14 15 #define CONFIG_SYS_GENERIC_BOARD 16 #define CONFIG_CPU_PXA25X 1 17 #define CONFIG_BOARD_H2200 18 19 #define CONFIG_SYS_NO_FLASH 20 21 #define CONFIG_NR_DRAM_BANKS 1 22 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ 23 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 24 25 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 26 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE 27 28 #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 29 30 #define CONFIG_ENV_SIZE 0x00040000 31 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) 32 33 #define CONFIG_ENV_IS_NOWHERE 34 #define CONFIG_SYS_MAXARGS 16 35 #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ 36 37 /* 38 * iPAQ 1st stage bootloader loads 2nd stage bootloader 39 * at address 0xa0040000 but bootloader requires header 40 * which is 0x1000 long. 41 * 42 * --- Header begin --- 43 * .word 0xea0003fe ; b 0x1000 44 * 45 * .org 0x40 46 * .ascii "ECEC" 47 * 48 * .org 0x1000 49 * --- Header end --- 50 */ 51 52 #define CONFIG_SYS_TEXT_BASE 0xa0041000 53 54 /* 55 * Static chips 56 */ 57 58 #define CONFIG_SYS_MSC0_VAL 0x246c7ffc 59 #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 60 #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 61 62 /* 63 * PCMCIA and CF Interfaces 64 */ 65 66 #define CONFIG_SYS_MECR_VAL 0x00000000 67 #define CONFIG_SYS_MCMEM0_VAL 0x00000000 68 #define CONFIG_SYS_MCMEM1_VAL 0x00000000 69 #define CONFIG_SYS_MCATT0_VAL 0x00000000 70 #define CONFIG_SYS_MCATT1_VAL 0x00000000 71 #define CONFIG_SYS_MCIO0_VAL 0x00000000 72 #define CONFIG_SYS_MCIO1_VAL 0x00000000 73 74 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 75 #define CONFIG_SYS_SXCNFG_VAL 0x00040004 76 77 #define CONFIG_SYS_MDREFR_VAL 0x0099E018 78 #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB 79 #define CONFIG_SYS_MDMRS_VAL 0x00220022 80 81 #define CONFIG_SYS_PSSR_VAL 0x00000000 82 #define CONFIG_SYS_CKEN 0x00004840 83 #define CONFIG_SYS_CCCR 0x00000161 84 85 /* 86 * GPIOs 87 */ 88 89 #define CONFIG_SYS_GPSR0_VAL 0x01000000 90 #define CONFIG_SYS_GPSR1_VAL 0x00000000 91 #define CONFIG_SYS_GPSR2_VAL 0x00010000 92 93 #define CONFIG_SYS_GPCR0_VAL 0x00000000 94 #define CONFIG_SYS_GPCR1_VAL 0x00000000 95 #define CONFIG_SYS_GPCR2_VAL 0x00000000 96 97 #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00 98 #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83 99 #define CONFIG_SYS_GPDR2_VAL 0x000157FF 100 101 #define CONFIG_SYS_GAFR0_L_VAL 0x80401000 102 #define CONFIG_SYS_GAFR0_U_VAL 0x00000112 103 #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550 104 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA 105 #define CONFIG_SYS_GAFR2_L_VAL 0x20000000 106 #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 107 108 /* 109 * Serial port 110 */ 111 112 #define CONFIG_PXA_SERIAL 113 #define CONFIG_FFUART 114 #define CONFIG_CONS_INDEX 3 115 116 #define CONFIG_BAUDRATE 115200 117 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } 118 119 #define CONFIG_FIT 120 #define CONFIG_FIT_DISABLE_SHA256 121 #define CONFIG_SETUP_MEMORY_TAGS 122 #define CONFIG_CMDLINE_TAG 123 #define CONFIG_INITRD_TAG 124 125 /* Monitor Command Prompt */ 126 #define CONFIG_SYS_PROMPT "> " 127 #define CONFIG_SYS_HUSH_PARSER 128 #define CONFIG_SYS_PROMPT_HUSH_PS2 "$ " 129 130 /* Console I/O Buffer Size */ 131 #define CONFIG_SYS_CBSIZE 256 132 133 /* Print Buffer Size */ 134 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 135 sizeof(CONFIG_SYS_PROMPT) + 16) 136 137 #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" 138 139 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 140 #define CONFIG_USB_DEV_PULLUP_GPIO 33 141 /* USB VBUS GPIO 3 */ 142 143 #define CONFIG_CMD_PING 144 145 #define CONFIG_BOOTDELAY 2 146 #define CONFIG_BOOTCOMMAND \ 147 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ 148 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ 149 "source :script ; " \ 150 "bootm ; " 151 152 #define CONFIG_USB_GADGET_PXA2XX 153 #define CONFIG_USB_ETHER 154 #define CONFIG_USB_ETH_SUBSET 155 156 #define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01" 157 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02" 158 #define CONFIG_EXTRA_ENV_SETTINGS \ 159 "stdin=serial\0" \ 160 "stdout=serial\0" \ 161 "stderr=serial\0" 162 163 #endif /* __CONFIG_H */ 164