1 /* 2 * iPAQ h2200 board configuration 3 * 4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #define CONFIG_MACH_TYPE MACH_TYPE_H2200 13 14 #define CONFIG_CPU_PXA25X 1 15 #define CONFIG_BOARD_H2200 16 17 #define CONFIG_NR_DRAM_BANKS 1 18 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ 19 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 20 21 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 22 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE 23 24 #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 25 26 #define CONFIG_ENV_SIZE 0x00040000 27 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) 28 29 #define CONFIG_ENV_IS_NOWHERE 30 #define CONFIG_SYS_MAXARGS 16 31 #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ 32 33 /* 34 * iPAQ 1st stage bootloader loads 2nd stage bootloader 35 * at address 0xa0040000 but bootloader requires header 36 * which is 0x1000 long. 37 * 38 * --- Header begin --- 39 * .word 0xea0003fe ; b 0x1000 40 * 41 * .org 0x40 42 * .ascii "ECEC" 43 * 44 * .org 0x1000 45 * --- Header end --- 46 */ 47 48 #define CONFIG_SYS_TEXT_BASE 0xa0041000 49 50 /* 51 * Static chips 52 */ 53 54 #define CONFIG_SYS_MSC0_VAL 0x246c7ffc 55 #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 56 #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 57 58 /* 59 * PCMCIA and CF Interfaces 60 */ 61 62 #define CONFIG_SYS_MECR_VAL 0x00000000 63 #define CONFIG_SYS_MCMEM0_VAL 0x00000000 64 #define CONFIG_SYS_MCMEM1_VAL 0x00000000 65 #define CONFIG_SYS_MCATT0_VAL 0x00000000 66 #define CONFIG_SYS_MCATT1_VAL 0x00000000 67 #define CONFIG_SYS_MCIO0_VAL 0x00000000 68 #define CONFIG_SYS_MCIO1_VAL 0x00000000 69 70 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 71 #define CONFIG_SYS_SXCNFG_VAL 0x00040004 72 73 #define CONFIG_SYS_MDREFR_VAL 0x0099E018 74 #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB 75 #define CONFIG_SYS_MDMRS_VAL 0x00220022 76 77 #define CONFIG_SYS_PSSR_VAL 0x00000000 78 #define CONFIG_SYS_CKEN 0x00004840 79 #define CONFIG_SYS_CCCR 0x00000161 80 81 /* 82 * GPIOs 83 */ 84 85 #define CONFIG_SYS_GPSR0_VAL 0x01000000 86 #define CONFIG_SYS_GPSR1_VAL 0x00000000 87 #define CONFIG_SYS_GPSR2_VAL 0x00010000 88 89 #define CONFIG_SYS_GPCR0_VAL 0x00000000 90 #define CONFIG_SYS_GPCR1_VAL 0x00000000 91 #define CONFIG_SYS_GPCR2_VAL 0x00000000 92 93 #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00 94 #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83 95 #define CONFIG_SYS_GPDR2_VAL 0x000157FF 96 97 #define CONFIG_SYS_GAFR0_L_VAL 0x80401000 98 #define CONFIG_SYS_GAFR0_U_VAL 0x00000112 99 #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550 100 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA 101 #define CONFIG_SYS_GAFR2_L_VAL 0x20000000 102 #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 103 104 /* 105 * Serial port 106 */ 107 #define CONFIG_FFUART 108 #define CONFIG_CONS_INDEX 3 109 110 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } 111 112 #define CONFIG_SETUP_MEMORY_TAGS 113 #define CONFIG_CMDLINE_TAG 114 #define CONFIG_INITRD_TAG 115 116 /* Monitor Command Prompt */ 117 118 /* Console I/O Buffer Size */ 119 #define CONFIG_SYS_CBSIZE 256 120 121 /* Print Buffer Size */ 122 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 123 sizeof(CONFIG_SYS_PROMPT) + 16) 124 125 #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" 126 127 #define CONFIG_USB_DEV_PULLUP_GPIO 33 128 /* USB VBUS GPIO 3 */ 129 130 #define CONFIG_BOOTCOMMAND \ 131 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ 132 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ 133 "source :script ; " \ 134 "bootm ; " 135 136 #define CONFIG_USB_GADGET_PXA2XX 137 #define CONFIG_USB_ETHER 138 #define CONFIG_USB_ETH_SUBSET 139 140 #define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01" 141 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02" 142 #define CONFIG_EXTRA_ENV_SETTINGS \ 143 "stdin=serial\0" \ 144 "stdout=serial\0" \ 145 "stderr=serial\0" 146 147 #endif /* __CONFIG_H */ 148