1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2009-2014 4 * Gerald Kerma <dreagle@doukki.net> 5 * Marvell Semiconductor <www.marvell.com> 6 * Written-by: Siddarth Gore <gores@marvell.com> 7 */ 8 9 #ifndef _CONFIG_GURUPLUG_H 10 #define _CONFIG_GURUPLUG_H 11 12 /* 13 * High Level Configuration Options (easy to change) 14 */ 15 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 16 17 /* 18 * Standard filesystems 19 */ 20 #define CONFIG_BZIP2 21 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 22 #define CONFIG_MTD_PARTITIONS 23 24 /* 25 * mv-plug-common.h should be defined after CMD configs since it used them 26 * to enable certain macros 27 */ 28 #include "mv-plug-common.h" 29 30 /* 31 * Environment variables configurations 32 */ 33 #ifdef CONFIG_CMD_NAND 34 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 35 #endif 36 /* 37 * max 4k env size is enough, but in case of nand 38 * it has to be rounded to sector size 39 */ 40 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 41 #define CONFIG_ENV_OFFSET 0xE0000 /* env starts here */ 42 /* 43 * Environment is right behind U-Boot in flash. Make sure U-Boot 44 * doesn't grow into the environment area. 45 */ 46 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET 47 48 /* 49 * Default environment variables 50 */ 51 #define CONFIG_BOOTCOMMAND \ 52 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 53 "ubi part root; " \ 54 "ubifsmount ubi:rootfs; " \ 55 "ubifsload 0x800000 ${kernel}; " \ 56 "ubifsload 0x700000 ${fdt}; " \ 57 "ubifsumount; " \ 58 "fdt addr 0x700000; fdt resize; fdt chosen; " \ 59 "bootz 0x800000 - 0x700000" 60 61 #define CONFIG_EXTRA_ENV_SETTINGS \ 62 "console=console=ttyS0,115200\0" \ 63 "mtdids=nand0=orion_nand\0" \ 64 "mtdparts="CONFIG_MTDPARTS_DEFAULT \ 65 "kernel=/boot/zImage\0" \ 66 "fdt=/boot/guruplug-server-plus.dtb\0" \ 67 "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" 68 69 /* 70 * Ethernet Driver configuration 71 */ 72 #ifdef CONFIG_CMD_NET 73 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 74 #define CONFIG_PHY_BASE_ADR 0 75 #endif /* CONFIG_CMD_NET */ 76 77 /* 78 * SATA Driver configuration 79 */ 80 #ifdef CONFIG_MVSATA_IDE 81 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 82 #endif /*CONFIG_MVSATA_IDE*/ 83 84 #endif /* _CONFIG_GURUPLUG_H */ 85