1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Written-by: Siddarth Gore <gores@marvell.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef _CONFIG_GURUPLUG_H 10 #define _CONFIG_GURUPLUG_H 11 12 /* 13 * Version number information 14 */ 15 #define CONFIG_IDENT_STRING "\nMarvell-GuruPlug" 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 #define CONFIG_KIRKWOOD 1 /* SOC Family Name */ 22 #define CONFIG_KW88F6281 1 /* SOC Name */ 23 #define CONFIG_MACH_GURUPLUG /* Machine type */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* 27 * Commands configuration 28 */ 29 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 30 #include <config_cmd_default.h> 31 #define CONFIG_CMD_DHCP 32 #define CONFIG_CMD_ENV 33 #define CONFIG_CMD_FAT 34 #define CONFIG_CMD_NAND 35 #define CONFIG_CMD_PING 36 #define CONFIG_CMD_USB 37 #define CONFIG_CMD_IDE 38 39 /* 40 * mv-common.h should be defined after CMD configs since it used them 41 * to enable certain macros 42 */ 43 #include "mv-common.h" 44 45 /* 46 * Environment variables configurations 47 */ 48 #ifdef CONFIG_CMD_NAND 49 #define CONFIG_ENV_IS_IN_NAND 1 50 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 51 #else 52 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 53 #endif 54 /* 55 * max 4k env size is enough, but in case of nand 56 * it has to be rounded to sector size 57 */ 58 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 59 #define CONFIG_ENV_ADDR 0x60000 60 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 61 62 /* 63 * Default environment variables 64 */ 65 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 66 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ 67 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 68 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 69 "bootm 0x6400000;" 70 71 #define CONFIG_EXTRA_ENV_SETTINGS \ 72 "x_bootcmd_ethernet=ping 192.168.2.1\0" \ 73 "x_bootcmd_usb=usb start\0" \ 74 "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \ 75 "x_bootargs=console=ttyS0,115200\0" \ 76 "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" 77 78 /* 79 * Ethernet Driver configuration 80 */ 81 #ifdef CONFIG_CMD_NET 82 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 83 #define CONFIG_PHY_BASE_ADR 0 84 #endif /* CONFIG_CMD_NET */ 85 86 /* 87 * SATA Driver configuration 88 */ 89 #ifdef CONFIG_MVSATA_IDE 90 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 91 #endif /*CONFIG_MVSATA_IDE*/ 92 93 #define CONFIG_SYS_ALT_MEMTEST 94 95 #endif /* _CONFIG_GURUPLUG_H */ 96