xref: /openbmc/u-boot/include/configs/guruplug.h (revision 607232e4)
1 /*
2  * (C) Copyright 2009
3  * Marvell Semiconductor <www.marvell.com>
4  * Written-by: Siddarth Gore <gores@marvell.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef _CONFIG_GURUPLUG_H
10 #define _CONFIG_GURUPLUG_H
11 
12 /*
13  * Version number information
14  */
15 #define CONFIG_IDENT_STRING	"\nMarvell-GuruPlug"
16 
17 /*
18  * High Level Configuration Options (easy to change)
19  */
20 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
21 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
22 #define CONFIG_KW88F6281	1	/* SOC Name */
23 #define CONFIG_MACH_GURUPLUG	/* Machine type */
24 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
25 
26 /*
27  * Commands configuration
28  */
29 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
30 #include <config_cmd_default.h>
31 #define CONFIG_CMD_DHCP
32 #define CONFIG_CMD_ENV
33 #define CONFIG_CMD_FAT
34 #define CONFIG_CMD_NAND
35 #define CONFIG_CMD_PING
36 #define CONFIG_CMD_USB
37 #define CONFIG_CMD_IDE
38 
39 /*
40  * mv-common.h should be defined after CMD configs since it used them
41  * to enable certain macros
42  */
43 #include "mv-common.h"
44 
45 /*
46  *  Environment variables configurations
47  */
48 #ifdef CONFIG_CMD_NAND
49 #define CONFIG_ENV_IS_IN_NAND		1
50 #define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
51 #else
52 #define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
53 #endif
54 /*
55  * max 4k env size is enough, but in case of nand
56  * it has to be rounded to sector size
57  */
58 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
59 #define CONFIG_ENV_ADDR			0x60000
60 #define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
61 
62 /*
63  * Default environment variables
64  */
65 #define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
66 	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
67 	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
68 	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
69 	"bootm 0x6400000;"
70 
71 #define CONFIG_EXTRA_ENV_SETTINGS	\
72 	"x_bootcmd_ethernet=ping 192.168.2.1\0"	\
73 	"x_bootcmd_usb=usb start\0"	\
74 	"x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
75 	"x_bootargs=console=ttyS0,115200\0"	\
76 	"x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
77 
78 /*
79  * Ethernet Driver configuration
80  */
81 #ifdef CONFIG_CMD_NET
82 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
83 #define CONFIG_PHY_BASE_ADR	0
84 #endif /* CONFIG_CMD_NET */
85 
86 /*
87  * SATA Driver configuration
88  */
89 #ifdef CONFIG_MVSATA_IDE
90 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
91 #endif /*CONFIG_MVSATA_IDE*/
92 
93 #define CONFIG_SYS_ALT_MEMTEST
94 
95 #endif /* _CONFIG_GURUPLUG_H */
96