1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Written-by: Siddarth Gore <gores@marvell.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef _CONFIG_GURUPLUG_H 10 #define _CONFIG_GURUPLUG_H 11 12 /* 13 * Version number information 14 */ 15 #define CONFIG_IDENT_STRING "\nMarvell-GuruPlug" 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_MACH_GURUPLUG /* Machine type */ 23 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 29 #include <config_cmd_default.h> 30 #define CONFIG_CMD_DHCP 31 #define CONFIG_CMD_ENV 32 #define CONFIG_CMD_FAT 33 #define CONFIG_CMD_NAND 34 #define CONFIG_CMD_PING 35 #define CONFIG_CMD_USB 36 #define CONFIG_CMD_IDE 37 38 /* 39 * mv-common.h should be defined after CMD configs since it used them 40 * to enable certain macros 41 */ 42 #include "mv-common.h" 43 44 /* 45 * Environment variables configurations 46 */ 47 #ifdef CONFIG_CMD_NAND 48 #define CONFIG_ENV_IS_IN_NAND 1 49 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 50 #else 51 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 52 #endif 53 /* 54 * max 4k env size is enough, but in case of nand 55 * it has to be rounded to sector size 56 */ 57 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 58 #define CONFIG_ENV_ADDR 0x60000 59 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ 60 61 /* 62 * Default environment variables 63 */ 64 #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ 65 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ 66 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ 67 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ 68 "bootm 0x6400000;" 69 70 #define CONFIG_EXTRA_ENV_SETTINGS \ 71 "x_bootcmd_ethernet=ping 192.168.2.1\0" \ 72 "x_bootcmd_usb=usb start\0" \ 73 "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \ 74 "x_bootargs=console=ttyS0,115200\0" \ 75 "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" 76 77 /* 78 * Ethernet Driver configuration 79 */ 80 #ifdef CONFIG_CMD_NET 81 #define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ 82 #define CONFIG_PHY_BASE_ADR 0 83 #endif /* CONFIG_CMD_NET */ 84 85 /* 86 * SATA Driver configuration 87 */ 88 #ifdef CONFIG_MVSATA_IDE 89 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 90 #endif /*CONFIG_MVSATA_IDE*/ 91 92 #define CONFIG_SYS_ALT_MEMTEST 93 94 #endif /* _CONFIG_GURUPLUG_H */ 95