xref: /openbmc/u-boot/include/configs/gplugd.h (revision fabbeb33)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2011
4  * eInfochips Ltd. <www.einfochips.com>
5  * Written-by: Ajay Bhargav <contact@8051projects.net>
6  *
7  * Based on Aspenite:
8  * (C) Copyright 2010
9  * Marvell Semiconductor <www.marvell.com>
10  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
11  * Contributor: Mahavir Jain <mjain@marvell.com>
12  */
13 
14 #ifndef __CONFIG_GPLUGD_H
15 #define __CONFIG_GPLUGD_H
16 
17 /*
18  * High Level Configuration Options
19  */
20 #define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
21 #define CONFIG_ARMADA100		1	/* SOC Family Name */
22 #define CONFIG_ARMADA168		1	/* SOC Used on this Board */
23 #define CONFIG_MACH_TYPE		MACH_TYPE_GPLUGD /* Machine type */
24 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
25 
26 /*
27  * There is no internal RAM in ARMADA100, using DRAM
28  * TBD: dcache to be used for this
29  */
30 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - 0x00200000)
31 
32 /*
33  * Commands configuration
34  */
35 
36 /* Disable DCACHE */
37 #define CONFIG_SYS_DCACHE_OFF
38 
39 /* Network configuration */
40 #ifdef CONFIG_CMD_NET
41 #define CONFIG_ARMADA100_FEC
42 
43 /* DHCP Support */
44 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
45 #endif /* CONFIG_CMD_NET */
46 
47 /* GPIO Support */
48 #define CONFIG_MARVELL_GPIO
49 
50 /* PHY configuration */
51 #define CONFIG_RESET_PHY_R
52 /* 88E3015 register definition */
53 #define PHY_LED_PAR_SEL_REG		22
54 #define PHY_LED_MAN_REG			25
55 #define PHY_LED_VAL			0x5b	/* LINK LED1, ACT LED2 */
56 /* GPIO Configuration for PHY */
57 #define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */
58 
59 /* Flash Support */
60 
61 /*
62  * mv-common.h should be defined after CMD configs since it used them
63  * to enable certain macros
64  */
65 #include "mv-common.h"
66 
67 #ifdef CONFIG_SYS_NS16550_COM1
68 #undef CONFIG_SYS_NS16550_COM1
69 #endif /* CONFIG_SYS_NS16550_COM1 */
70 
71 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
72 
73 /*
74  * Environment variables configurations
75  */
76 #define CONFIG_ENV_SIZE			0x4000
77 
78 #ifdef CONFIG_CMD_USB
79 #define CONFIG_USB_EHCI_ARMADA100
80 #define CONFIG_EHCI_IS_TDI
81 #endif /* CONFIG_CMD_USB */
82 
83 #endif	/* __CONFIG_GPLUGD_H */
84