1 /* 2 * (C) Copyright 2011 3 * eInfochips Ltd. <www.einfochips.com> 4 * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> 5 * 6 * Based on Aspenite: 7 * (C) Copyright 2010 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * Contributor: Mahavir Jain <mjain@marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_GPLUGD_H 16 #define __CONFIG_GPLUGD_H 17 18 /* 19 * FIXME: fix for error caused due to recent update to mach-types.h 20 */ 21 #include <asm/mach-types.h> 22 #ifdef MACH_TYPE_SHEEVAD 23 #error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." 24 #else 25 #define MACH_TYPE_SHEEVAD 2625 26 #endif 27 28 /* 29 * Generic board support 30 */ 31 #define CONFIG_SYS_GENERIC_BOARD 32 33 /* 34 * Version number information 35 */ 36 #define CONFIG_IDENT_STRING "\nMarvell-gplugD" 37 38 /* 39 * High Level Configuration Options 40 */ 41 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ 42 #define CONFIG_ARMADA100 1 /* SOC Family Name */ 43 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ 44 #define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ 45 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 46 47 #define CONFIG_SYS_TEXT_BASE 0x00f00000 48 49 /* 50 * There is no internal RAM in ARMADA100, using DRAM 51 * TBD: dcache to be used for this 52 */ 53 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) 54 #define CONFIG_NR_DRAM_BANKS_MAX 2 55 56 /* 57 * Commands configuration 58 */ 59 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 60 #include <config_cmd_default.h> 61 #define CONFIG_CMD_I2C 62 #undef CONFIG_CMD_FPGA 63 #define CONFIG_CMD_USB 64 #define CONFIG_CMD_EXT2 65 #define CONFIG_CMD_FAT 66 67 /* Disable DCACHE */ 68 #define CONFIG_SYS_DCACHE_OFF 69 70 /* Network configuration */ 71 #ifdef CONFIG_CMD_NET 72 #define CONFIG_CMD_PING 73 #define CONFIG_ARMADA100_FEC 74 75 /* DHCP Support */ 76 #define CONFIG_CMD_DHCP 77 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 78 #endif /* CONFIG_CMD_NET */ 79 80 /* GPIO Support */ 81 #define CONFIG_MARVELL_GPIO 82 83 /* PHY configuration */ 84 #define CONFIG_MII 85 #define CONFIG_CMD_MII 86 #define CONFIG_RESET_PHY_R 87 /* 88E3015 register definition */ 88 #define PHY_LED_PAR_SEL_REG 22 89 #define PHY_LED_MAN_REG 25 90 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ 91 /* GPIO Configuration for PHY */ 92 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ 93 94 /* SPI Support */ 95 #define CONFIG_ARMADA100_SPI 96 #define CONFIG_ENV_SPI_CS 110 97 #define CONFIG_SYS_SSP_PORT 2 98 99 /* Flash Support */ 100 #define CONFIG_CMD_SF 101 #define CONFIG_SPI_FLASH_ATMEL 102 103 /* 104 * mv-common.h should be defined after CMD configs since it used them 105 * to enable certain macros 106 */ 107 #include "mv-common.h" 108 #undef CONFIG_ARCH_MISC_INIT 109 110 #ifdef CONFIG_SYS_NS16550_COM1 111 #undef CONFIG_SYS_NS16550_COM1 112 #endif /* CONFIG_SYS_NS16550_COM1 */ 113 114 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE 115 116 /* 117 * Environment variables configurations 118 */ 119 #define CONFIG_ENV_IS_IN_SPI_FLASH 120 #define CONFIG_ENV_SECT_SIZE 0x4000 121 #define CONFIG_ENV_SIZE 0x4000 122 #define CONFIG_ENV_OFFSET 0x07C000 123 124 #define CONFIG_CMD_ASKENV 125 #define CONFIG_CMD_EDITENV 126 #define CONFIG_CMD_SAVEENV 127 128 #ifdef CONFIG_CMD_USB 129 #define CONFIG_USB_EHCI 130 #define CONFIG_USB_EHCI_ARMADA100 131 #define CONFIG_EHCI_IS_TDI 132 #define CONFIG_USB_STORAGE 133 #endif /* CONFIG_CMD_USB */ 134 135 #define CONFIG_DOS_PARTITION 136 #define CONFIG_ISO_PARTITION 137 #define CONFIG_SUPPORT_VFAT 138 139 #endif /* __CONFIG_GPLUGD_H */ 140