1 /* 2 * (C) Copyright 2011 3 * eInfochips Ltd. <www.einfochips.com> 4 * Written-by: Ajay Bhargav <contact@8051projects.net> 5 * 6 * Based on Aspenite: 7 * (C) Copyright 2010 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * Contributor: Mahavir Jain <mjain@marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_GPLUGD_H 16 #define __CONFIG_GPLUGD_H 17 18 /* 19 * High Level Configuration Options 20 */ 21 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ 22 #define CONFIG_ARMADA100 1 /* SOC Family Name */ 23 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ 24 #define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */ 25 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 26 27 #define CONFIG_SYS_TEXT_BASE 0x00f00000 28 29 /* 30 * There is no internal RAM in ARMADA100, using DRAM 31 * TBD: dcache to be used for this 32 */ 33 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) 34 #define CONFIG_NR_DRAM_BANKS_MAX 2 35 36 /* 37 * Commands configuration 38 */ 39 40 /* Disable DCACHE */ 41 #define CONFIG_SYS_DCACHE_OFF 42 43 /* Network configuration */ 44 #ifdef CONFIG_CMD_NET 45 #define CONFIG_ARMADA100_FEC 46 47 /* DHCP Support */ 48 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 49 #endif /* CONFIG_CMD_NET */ 50 51 /* GPIO Support */ 52 #define CONFIG_MARVELL_GPIO 53 54 /* PHY configuration */ 55 #define CONFIG_MII 56 #define CONFIG_RESET_PHY_R 57 /* 88E3015 register definition */ 58 #define PHY_LED_PAR_SEL_REG 22 59 #define PHY_LED_MAN_REG 25 60 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ 61 /* GPIO Configuration for PHY */ 62 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ 63 64 /* Flash Support */ 65 66 /* 67 * mv-common.h should be defined after CMD configs since it used them 68 * to enable certain macros 69 */ 70 #include "mv-common.h" 71 72 #ifdef CONFIG_SYS_NS16550_COM1 73 #undef CONFIG_SYS_NS16550_COM1 74 #endif /* CONFIG_SYS_NS16550_COM1 */ 75 76 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE 77 78 /* 79 * Environment variables configurations 80 */ 81 #define CONFIG_ENV_IS_NOWHERE 82 #define CONFIG_ENV_SIZE 0x4000 83 84 #ifdef CONFIG_CMD_USB 85 #define CONFIG_USB_EHCI_ARMADA100 86 #define CONFIG_EHCI_IS_TDI 87 #endif /* CONFIG_CMD_USB */ 88 89 #define CONFIG_SUPPORT_VFAT 90 91 #endif /* __CONFIG_GPLUGD_H */ 92