xref: /openbmc/u-boot/include/configs/gplugd.h (revision a7efd719)
1 /*
2  * (C) Copyright 2011
3  * eInfochips Ltd. <www.einfochips.com>
4  * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
5  *
6  * Based on Aspenite:
7  * (C) Copyright 2010
8  * Marvell Semiconductor <www.marvell.com>
9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10  * Contributor: Mahavir Jain <mjain@marvell.com>
11  *
12  * See file CREDITS for list of people who contributed to this
13  * project.
14  *
15  * This program is free software; you can redistribute it and/or
16  * modify it under the terms of the GNU General Public License as
17  * published by the Free Software Foundation; either version 2 of
18  * the License, or (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, write to the Free Software
27  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
28  * MA 02110-1301 USA
29  */
30 
31 #ifndef __CONFIG_GPLUGD_H
32 #define __CONFIG_GPLUGD_H
33 
34 /*
35  * Version number information
36  */
37 #define CONFIG_IDENT_STRING	"\nMarvell-gplugD"
38 
39 /*
40  * High Level Configuration Options
41  */
42 #define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
43 #define CONFIG_ARMADA100		1	/* SOC Family Name */
44 #define CONFIG_ARMADA168		1	/* SOC Used on this Board */
45 #define CONFIG_MACH_SHEEVAD			/* Machine type */
46 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
47 
48 #define	CONFIG_SYS_TEXT_BASE	0x00f00000
49 
50 /*
51  * There is no internal RAM in ARMADA100, using DRAM
52  * TBD: dcache to be used for this
53  */
54 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - 0x00200000)
55 #define CONFIG_NR_DRAM_BANKS_MAX	2
56 
57 /*
58  * Commands configuration
59  */
60 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
61 #include <config_cmd_default.h>
62 #define CONFIG_CMD_I2C
63 #define CONFIG_CMD_AUTOSCRIPT
64 #undef CONFIG_CMD_FPGA
65 
66 /* Disable DCACHE */
67 #define CONFIG_SYS_DCACHE_OFF
68 
69 /* Network configuration */
70 #ifdef CONFIG_CMD_NET
71 #define CONFIG_CMD_PING
72 #define CONFIG_ARMADA100_FEC
73 
74 /* DHCP Support */
75 #define CONFIG_CMD_DHCP
76 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
77 #endif /* CONFIG_CMD_NET */
78 
79 /* GPIO Support */
80 #define CONFIG_MARVELL_GPIO
81 
82 /* PHY configuration */
83 #define CONFIG_MII
84 #define CONFIG_CMD_MII
85 #define CONFIG_RESET_PHY_R
86 /* 88E3015 register definition */
87 #define PHY_LED_PAR_SEL_REG		22
88 #define PHY_LED_MAN_REG			25
89 #define PHY_LED_VAL			0x5b	/* LINK LED1, ACT LED2 */
90 /* GPIO Configuration for PHY */
91 #define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */
92 
93 /* SPI Support */
94 #define CONFIG_ARMADA100_SPI
95 #define CONFIG_ENV_SPI_CS		110
96 #define CONFIG_SYS_SSP_PORT		2
97 
98 /* Flash Support */
99 #define CONFIG_CMD_SF
100 #define CONFIG_SPI_FLASH_ATMEL
101 
102 /*
103  * mv-common.h should be defined after CMD configs since it used them
104  * to enable certain macros
105  */
106 #include "mv-common.h"
107 #undef CONFIG_ARCH_MISC_INIT
108 
109 #ifdef CONFIG_SYS_NS16550_COM1
110 #undef CONFIG_SYS_NS16550_COM1
111 #endif /* CONFIG_SYS_NS16550_COM1 */
112 
113 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
114 
115 /*
116  * Environment variables configurations
117  */
118 #define CONFIG_ENV_IS_IN_SPI_FLASH
119 #define CONFIG_ENV_SECT_SIZE		0x4000
120 #define CONFIG_ENV_SIZE			0x4000
121 #define CONFIG_ENV_OFFSET		0x07C000
122 
123 #define CONFIG_CMD_ASKENV
124 #define CONFIG_CMD_EDITENV
125 #define CONFIG_CMD_SAVEENV
126 
127 #endif	/* __CONFIG_GPLUGD_H */
128