1 /* 2 * (C) Copyright 2011 3 * eInfochips Ltd. <www.einfochips.com> 4 * Written-by: Ajay Bhargav <contact@8051projects.net> 5 * 6 * Based on Aspenite: 7 * (C) Copyright 2010 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * Contributor: Mahavir Jain <mjain@marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_GPLUGD_H 16 #define __CONFIG_GPLUGD_H 17 18 /* 19 * FIXME: fix for error caused due to recent update to mach-types.h 20 */ 21 #include <asm/mach-types.h> 22 #ifdef MACH_TYPE_SHEEVAD 23 #error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." 24 #else 25 #define MACH_TYPE_SHEEVAD 2625 26 #endif 27 28 /* 29 * High Level Configuration Options 30 */ 31 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ 32 #define CONFIG_ARMADA100 1 /* SOC Family Name */ 33 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ 34 #define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ 35 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 36 37 #define CONFIG_SYS_TEXT_BASE 0x00f00000 38 39 /* 40 * There is no internal RAM in ARMADA100, using DRAM 41 * TBD: dcache to be used for this 42 */ 43 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) 44 #define CONFIG_NR_DRAM_BANKS_MAX 2 45 46 /* 47 * Commands configuration 48 */ 49 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 50 51 /* Disable DCACHE */ 52 #define CONFIG_SYS_DCACHE_OFF 53 54 /* Network configuration */ 55 #ifdef CONFIG_CMD_NET 56 #define CONFIG_ARMADA100_FEC 57 58 /* DHCP Support */ 59 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 60 #endif /* CONFIG_CMD_NET */ 61 62 /* GPIO Support */ 63 #define CONFIG_MARVELL_GPIO 64 65 /* PHY configuration */ 66 #define CONFIG_MII 67 #define CONFIG_RESET_PHY_R 68 /* 88E3015 register definition */ 69 #define PHY_LED_PAR_SEL_REG 22 70 #define PHY_LED_MAN_REG 25 71 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ 72 /* GPIO Configuration for PHY */ 73 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ 74 75 /* Flash Support */ 76 77 /* 78 * mv-common.h should be defined after CMD configs since it used them 79 * to enable certain macros 80 */ 81 #include "mv-common.h" 82 #undef CONFIG_ARCH_MISC_INIT 83 84 #ifdef CONFIG_SYS_NS16550_COM1 85 #undef CONFIG_SYS_NS16550_COM1 86 #endif /* CONFIG_SYS_NS16550_COM1 */ 87 88 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE 89 90 /* 91 * Environment variables configurations 92 */ 93 #define CONFIG_ENV_IS_NOWHERE 94 #define CONFIG_ENV_SIZE 0x4000 95 96 #ifdef CONFIG_CMD_USB 97 #define CONFIG_USB_EHCI 98 #define CONFIG_USB_EHCI_ARMADA100 99 #define CONFIG_EHCI_IS_TDI 100 #endif /* CONFIG_CMD_USB */ 101 102 #define CONFIG_DOS_PARTITION 103 #define CONFIG_ISO_PARTITION 104 #define CONFIG_SUPPORT_VFAT 105 106 #endif /* __CONFIG_GPLUGD_H */ 107