1 /* 2 * (C) Copyright 2011 3 * eInfochips Ltd. <www.einfochips.com> 4 * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> 5 * 6 * Based on Aspenite: 7 * (C) Copyright 2010 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * Contributor: Mahavir Jain <mjain@marvell.com> 11 * 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, 28 * MA 02110-1301 USA 29 */ 30 31 #ifndef __CONFIG_GPLUGD_H 32 #define __CONFIG_GPLUGD_H 33 34 /* 35 * Version number information 36 */ 37 #define CONFIG_IDENT_STRING "\nMarvell-gplugD" 38 39 /* 40 * High Level Configuration Options 41 */ 42 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ 43 #define CONFIG_ARMADA100 1 /* SOC Family Name */ 44 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ 45 #define CONFIG_MACH_SHEEVAD /* Machine type */ 46 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 47 48 #define CONFIG_SYS_TEXT_BASE 0x00f00000 49 50 /* 51 * There is no internal RAM in ARMADA100, using DRAM 52 * TBD: dcache to be used for this 53 */ 54 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) 55 #define CONFIG_NR_DRAM_BANKS_MAX 2 56 57 /* 58 * Commands configuration 59 */ 60 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 61 #include <config_cmd_default.h> 62 #define CONFIG_CMD_I2C 63 #define CONFIG_CMD_AUTOSCRIPT 64 #undef CONFIG_CMD_FPGA 65 66 /* Disable DCACHE */ 67 #define CONFIG_SYS_DCACHE_OFF 68 69 /* Network configuration */ 70 #ifdef CONFIG_CMD_NET 71 #define CONFIG_CMD_PING 72 #define CONFIG_ARMADA100_FEC 73 74 /* DHCP Support */ 75 #define CONFIG_CMD_DHCP 76 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 77 #endif /* CONFIG_CMD_NET */ 78 79 /* GPIO Support */ 80 #define CONFIG_MARVELL_GPIO 81 82 /* PHY configuration */ 83 #define CONFIG_MII 84 #define CONFIG_CMD_MII 85 #define CONFIG_RESET_PHY_R 86 /* 88E3015 register definition */ 87 #define PHY_LED_PAR_SEL_REG 22 88 #define PHY_LED_MAN_REG 25 89 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ 90 /* GPIO Configuration for PHY */ 91 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ 92 93 /* 94 * mv-common.h should be defined after CMD configs since it used them 95 * to enable certain macros 96 */ 97 #include "mv-common.h" 98 #undef CONFIG_ARCH_MISC_INIT 99 100 #ifdef CONFIG_SYS_NS16550_COM1 101 #undef CONFIG_SYS_NS16550_COM1 102 #endif /* CONFIG_SYS_NS16550_COM1 */ 103 104 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE 105 106 /* 107 * Environment variables configurations 108 */ 109 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 110 #define CONFIG_ENV_SIZE 0x20000 /* 64k */ 111 112 #endif /* __CONFIG_GPLUGD_H */ 113