1 /* 2 * (C) Copyright 2011 3 * eInfochips Ltd. <www.einfochips.com> 4 * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> 5 * 6 * Based on Aspenite: 7 * (C) Copyright 2010 8 * Marvell Semiconductor <www.marvell.com> 9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 10 * Contributor: Mahavir Jain <mjain@marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef __CONFIG_GPLUGD_H 16 #define __CONFIG_GPLUGD_H 17 18 /* 19 * FIXME: fix for error caused due to recent update to mach-types.h 20 */ 21 #include <asm/mach-types.h> 22 #ifdef MACH_TYPE_SHEEVAD 23 #error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." 24 #else 25 #define MACH_TYPE_SHEEVAD 2625 26 #endif 27 28 /* 29 * Generic board support 30 */ 31 #define CONFIG_SYS_GENERIC_BOARD 32 33 /* 34 * Version number information 35 */ 36 #define CONFIG_IDENT_STRING "\nMarvell-gplugD" 37 38 /* 39 * High Level Configuration Options 40 */ 41 #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ 42 #define CONFIG_ARMADA100 1 /* SOC Family Name */ 43 #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ 44 #define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ 45 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 46 47 #define CONFIG_SYS_TEXT_BASE 0x00f00000 48 49 /* 50 * There is no internal RAM in ARMADA100, using DRAM 51 * TBD: dcache to be used for this 52 */ 53 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) 54 #define CONFIG_NR_DRAM_BANKS_MAX 2 55 56 /* 57 * Commands configuration 58 */ 59 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 60 #define CONFIG_CMD_I2C 61 #define CONFIG_CMD_USB 62 #define CONFIG_CMD_EXT2 63 #define CONFIG_CMD_FAT 64 65 /* Disable DCACHE */ 66 #define CONFIG_SYS_DCACHE_OFF 67 68 /* Network configuration */ 69 #ifdef CONFIG_CMD_NET 70 #define CONFIG_CMD_PING 71 #define CONFIG_ARMADA100_FEC 72 73 /* DHCP Support */ 74 #define CONFIG_CMD_DHCP 75 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 76 #endif /* CONFIG_CMD_NET */ 77 78 /* GPIO Support */ 79 #define CONFIG_MARVELL_GPIO 80 81 /* PHY configuration */ 82 #define CONFIG_MII 83 #define CONFIG_CMD_MII 84 #define CONFIG_RESET_PHY_R 85 /* 88E3015 register definition */ 86 #define PHY_LED_PAR_SEL_REG 22 87 #define PHY_LED_MAN_REG 25 88 #define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ 89 /* GPIO Configuration for PHY */ 90 #define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ 91 92 /* SPI Support */ 93 #define CONFIG_ARMADA100_SPI 94 #define CONFIG_ENV_SPI_CS 110 95 #define CONFIG_SYS_SSP_PORT 2 96 97 /* Flash Support */ 98 #define CONFIG_CMD_SF 99 #define CONFIG_SPI_FLASH_ATMEL 100 101 /* 102 * mv-common.h should be defined after CMD configs since it used them 103 * to enable certain macros 104 */ 105 #include "mv-common.h" 106 #undef CONFIG_ARCH_MISC_INIT 107 108 #ifdef CONFIG_SYS_NS16550_COM1 109 #undef CONFIG_SYS_NS16550_COM1 110 #endif /* CONFIG_SYS_NS16550_COM1 */ 111 112 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE 113 114 /* 115 * Environment variables configurations 116 */ 117 #define CONFIG_ENV_IS_IN_SPI_FLASH 118 #define CONFIG_ENV_SECT_SIZE 0x4000 119 #define CONFIG_ENV_SIZE 0x4000 120 #define CONFIG_ENV_OFFSET 0x07C000 121 122 #define CONFIG_CMD_ASKENV 123 124 #ifdef CONFIG_CMD_USB 125 #define CONFIG_USB_EHCI 126 #define CONFIG_USB_EHCI_ARMADA100 127 #define CONFIG_EHCI_IS_TDI 128 #define CONFIG_USB_STORAGE 129 #endif /* CONFIG_CMD_USB */ 130 131 #define CONFIG_DOS_PARTITION 132 #define CONFIG_ISO_PARTITION 133 #define CONFIG_SUPPORT_VFAT 134 135 #endif /* __CONFIG_GPLUGD_H */ 136