xref: /openbmc/u-boot/include/configs/goflexhome.h (revision ee7bb5be)
1 /*
2  * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
3  *
4  * Based on dockstar.h originally written by
5  * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
6  *
7  * Based on sheevaplug.h originally written by
8  * Prafulla Wadaskar <prafulla@marvell.com>
9  * (C) Copyright 2009
10  * Marvell Semiconductor <www.marvell.com>
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #ifndef _CONFIG_GOFLEXHOME_H
16 #define _CONFIG_GOFLEXHOME_H
17 
18 /*
19  * Version number information
20  */
21 #define CONFIG_IDENT_STRING	"\nSeagate GoFlex Home"
22 
23 /*
24  * High Level Configuration Options (easy to change)
25  */
26 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
27 #define CONFIG_KW88F6281	1	/* SOC Name */
28 #define CONFIG_MACH_GOFLEXHOME		/* Machine type */
29 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
30 
31 /*
32  * Default GPIO configuration and LED status
33  */
34 #define GOFLEXHOME_OE_LOW               (~(0))
35 #define GOFLEXHOME_OE_HIGH              (~(0))
36 #define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
37 #define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
38 
39 /* PHY related */
40 #define MV88E1116_LED_FCTRL_REG         10
41 #define MV88E1116_CPRSP_CR3_REG         21
42 #define MV88E1116_MAC_CTRL_REG          21
43 #define MV88E1116_PGADR_REG             22
44 #define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
45 #define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
46 
47 /*
48  * Commands configuration
49  */
50 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
51 #define CONFIG_CONSOLE_MUX
52 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
53 
54 #define CONFIG_CMD_ENV
55 #define CONFIG_CMD_NAND
56 #define CONFIG_CMD_IDE
57 #define CONFIG_CMD_DATE
58 #define CONFIG_SYS_MVFS         /* Picks up Filesystem from mv-common.h */
59 
60 /*
61  * mv-common.h should be defined after CMD configs since it used them
62  * to enable certain macros
63  */
64 #include "mv-common.h"
65 
66 /*
67  *  Environment variables configurations
68  */
69 #ifdef CONFIG_CMD_NAND
70 #define CONFIG_ENV_IS_IN_NAND		1
71 #define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
72 #else
73 #define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
74 #endif
75 /*
76  * max 4k env size is enough, but in case of nand
77  * it has to be rounded to sector size
78  */
79 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
80 #define CONFIG_ENV_ADDR			0xC0000
81 #define CONFIG_ENV_OFFSET		0xC0000	/* env starts here */
82 
83 /*
84  * Default environment variables
85  */
86 #define CONFIG_BOOTCOMMAND \
87 	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
88 	"ubi part root; " \
89 	"ubifsmount ubi:root; " \
90 	"ubifsload 0x800000 ${kernel}; " \
91 	"bootm 0x800000"
92 
93 #define CONFIG_MTDPARTS \
94 	"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
95 
96 #define CONFIG_EXTRA_ENV_SETTINGS \
97 	"console=console=ttyS0,115200\0" \
98 	"mtdids=nand0=orion_nand\0" \
99 	"mtdparts="CONFIG_MTDPARTS \
100 	"kernel=/boot/uImage\0" \
101 	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
102 
103 /*
104  * Ethernet Driver configuration
105  */
106 #ifdef CONFIG_CMD_NET
107 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
108 #define CONFIG_PHY_BASE_ADR	0
109 #endif /* CONFIG_CMD_NET */
110 
111 /*
112  *  * SATA Driver configuration
113  *   */
114 #ifdef CONFIG_MVSATA_IDE
115 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
116 #endif /*CONFIG_MVSATA_IDE*/
117 
118 /*
119  *  * RTC driver configuration
120  *   */
121 #ifdef CONFIG_CMD_DATE
122 #define CONFIG_RTC_MV
123 #endif /* CONFIG_CMD_DATE */
124 
125 #endif /* _CONFIG_GOFLEXHOME_H */
126