1 /* 2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> 3 * 4 * Based on dockstar.h originally written by 5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 6 * 7 * Based on sheevaplug.h originally written by 8 * Prafulla Wadaskar <prafulla@marvell.com> 9 * (C) Copyright 2009 10 * Marvell Semiconductor <www.marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef _CONFIG_GOFLEXHOME_H 16 #define _CONFIG_GOFLEXHOME_H 17 18 /* 19 * Version number information 20 */ 21 #define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" 22 23 /* 24 * High Level Configuration Options (easy to change) 25 */ 26 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 27 #define CONFIG_KW88F6281 1 /* SOC Name */ 28 #define CONFIG_MACH_GOFLEXHOME /* Machine type */ 29 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 30 31 /* 32 * Default GPIO configuration and LED status 33 */ 34 #define GOFLEXHOME_OE_LOW (~(0)) 35 #define GOFLEXHOME_OE_HIGH (~(0)) 36 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ 37 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ 38 39 /* PHY related */ 40 #define MV88E1116_LED_FCTRL_REG 10 41 #define MV88E1116_CPRSP_CR3_REG 21 42 #define MV88E1116_MAC_CTRL_REG 21 43 #define MV88E1116_PGADR_REG 22 44 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 45 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 46 47 /* 48 * Commands configuration 49 */ 50 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 51 #define CONFIG_CONSOLE_MUX 52 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 53 54 #include <config_cmd_default.h> 55 #define CONFIG_CMD_DHCP 56 #define CONFIG_CMD_ENV 57 #define CONFIG_CMD_MII 58 #define CONFIG_CMD_NAND 59 #define CONFIG_CMD_PING 60 #define CONFIG_CMD_USB 61 #define CONFIG_CMD_IDE 62 #define CONFIG_CMD_DATE 63 #define CONFIG_CMD_EXT4 64 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ 65 66 /* 67 * mv-common.h should be defined after CMD configs since it used them 68 * to enable certain macros 69 */ 70 #include "mv-common.h" 71 72 #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ 73 #define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ 74 75 /* 76 * Environment variables configurations 77 */ 78 #ifdef CONFIG_CMD_NAND 79 #define CONFIG_ENV_IS_IN_NAND 1 80 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 81 #else 82 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 83 #endif 84 /* 85 * max 4k env size is enough, but in case of nand 86 * it has to be rounded to sector size 87 */ 88 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 89 #define CONFIG_ENV_ADDR 0xC0000 90 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ 91 92 /* 93 * Default environment variables 94 */ 95 #define CONFIG_BOOTCOMMAND \ 96 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 97 "ubi part root; " \ 98 "ubifsmount ubi:root; " \ 99 "ubifsload 0x800000 ${kernel}; " \ 100 "bootm 0x800000" 101 102 #define CONFIG_MTDPARTS \ 103 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" 104 105 #define CONFIG_EXTRA_ENV_SETTINGS \ 106 "console=console=ttyS0,115200\0" \ 107 "mtdids=nand0=orion_nand\0" \ 108 "mtdparts="CONFIG_MTDPARTS \ 109 "kernel=/boot/uImage\0" \ 110 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" 111 112 /* 113 * Ethernet Driver configuration 114 */ 115 #ifdef CONFIG_CMD_NET 116 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 117 #define CONFIG_PHY_BASE_ADR 0 118 #endif /* CONFIG_CMD_NET */ 119 120 /* 121 * * SATA Driver configuration 122 * */ 123 #ifdef CONFIG_MVSATA_IDE 124 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 125 #endif /*CONFIG_MVSATA_IDE*/ 126 127 /* 128 * * RTC driver configuration 129 * */ 130 #ifdef CONFIG_CMD_DATE 131 #define CONFIG_RTC_MV 132 #endif /* CONFIG_CMD_DATE */ 133 134 #endif /* _CONFIG_GOFLEXHOME_H */ 135