1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> 4 * 5 * Based on dockstar.h originally written by 6 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 7 * 8 * Based on sheevaplug.h originally written by 9 * Prafulla Wadaskar <prafulla@marvell.com> 10 * (C) Copyright 2009 11 * Marvell Semiconductor <www.marvell.com> 12 */ 13 14 #ifndef _CONFIG_GOFLEXHOME_H 15 #define _CONFIG_GOFLEXHOME_H 16 17 /* 18 * High Level Configuration Options (easy to change) 19 */ 20 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 21 #define CONFIG_KW88F6281 1 /* SOC Name */ 22 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 23 24 /* 25 * Default GPIO configuration and LED status 26 */ 27 #define GOFLEXHOME_OE_LOW (~(0)) 28 #define GOFLEXHOME_OE_HIGH (~(0)) 29 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ 30 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ 31 32 /* PHY related */ 33 #define MV88E1116_LED_FCTRL_REG 10 34 #define MV88E1116_CPRSP_CR3_REG 21 35 #define MV88E1116_MAC_CTRL_REG 21 36 #define MV88E1116_PGADR_REG 22 37 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 38 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 39 40 /* 41 * Commands configuration 42 */ 43 44 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 45 #define CONFIG_MTD_PARTITIONS 46 47 /* 48 * mv-common.h should be defined after CMD configs since it used them 49 * to enable certain macros 50 */ 51 #include "mv-common.h" 52 53 /* 54 * Environment variables configurations 55 */ 56 #ifdef CONFIG_CMD_NAND 57 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 58 #endif 59 /* 60 * max 4k env size is enough, but in case of nand 61 * it has to be rounded to sector size 62 */ 63 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 64 #define CONFIG_ENV_ADDR 0xC0000 65 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ 66 67 /* 68 * Default environment variables 69 */ 70 #define CONFIG_BOOTCOMMAND \ 71 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 72 "ubi part root; " \ 73 "ubifsmount ubi:root; " \ 74 "ubifsload 0x800000 ${kernel}; " \ 75 "bootm 0x800000" 76 77 #define CONFIG_EXTRA_ENV_SETTINGS \ 78 "console=console=ttyS0,115200\0" \ 79 "mtdids=nand0=orion_nand\0" \ 80 "mtdparts="CONFIG_MTDPARTS_DEFAULT \ 81 "kernel=/boot/uImage\0" \ 82 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" 83 84 /* 85 * Ethernet Driver configuration 86 */ 87 #ifdef CONFIG_CMD_NET 88 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 89 #define CONFIG_PHY_BASE_ADR 0 90 #endif /* CONFIG_CMD_NET */ 91 92 /* 93 * * SATA Driver configuration 94 * */ 95 #ifdef CONFIG_MVSATA_IDE 96 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 97 #endif /*CONFIG_MVSATA_IDE*/ 98 99 /* 100 * * RTC driver configuration 101 * */ 102 #ifdef CONFIG_CMD_DATE 103 #define CONFIG_RTC_MV 104 #endif /* CONFIG_CMD_DATE */ 105 106 #endif /* _CONFIG_GOFLEXHOME_H */ 107