1 /* 2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> 3 * 4 * Based on dockstar.h originally written by 5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 6 * 7 * Based on sheevaplug.h originally written by 8 * Prafulla Wadaskar <prafulla@marvell.com> 9 * (C) Copyright 2009 10 * Marvell Semiconductor <www.marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef _CONFIG_GOFLEXHOME_H 16 #define _CONFIG_GOFLEXHOME_H 17 18 #define CONFIG_SYS_GENERIC_BOARD 19 20 /* 21 * Version number information 22 */ 23 #define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" 24 25 /* 26 * High Level Configuration Options (easy to change) 27 */ 28 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 29 #define CONFIG_KW88F6281 1 /* SOC Name */ 30 #define CONFIG_MACH_GOFLEXHOME /* Machine type */ 31 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 32 33 /* 34 * Default GPIO configuration and LED status 35 */ 36 #define GOFLEXHOME_OE_LOW (~(0)) 37 #define GOFLEXHOME_OE_HIGH (~(0)) 38 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ 39 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ 40 41 /* PHY related */ 42 #define MV88E1116_LED_FCTRL_REG 10 43 #define MV88E1116_CPRSP_CR3_REG 21 44 #define MV88E1116_MAC_CTRL_REG 21 45 #define MV88E1116_PGADR_REG 22 46 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 47 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 48 49 /* 50 * Commands configuration 51 */ 52 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 53 #define CONFIG_CONSOLE_MUX 54 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 55 56 #define CONFIG_CMD_DHCP 57 #define CONFIG_CMD_ENV 58 #define CONFIG_CMD_MII 59 #define CONFIG_CMD_NAND 60 #define CONFIG_CMD_PING 61 #define CONFIG_CMD_USB 62 #define CONFIG_CMD_IDE 63 #define CONFIG_CMD_DATE 64 #define CONFIG_CMD_EXT4 65 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ 66 67 /* 68 * mv-common.h should be defined after CMD configs since it used them 69 * to enable certain macros 70 */ 71 #include "mv-common.h" 72 73 #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ 74 #define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ 75 76 /* 77 * Environment variables configurations 78 */ 79 #ifdef CONFIG_CMD_NAND 80 #define CONFIG_ENV_IS_IN_NAND 1 81 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 82 #else 83 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 84 #endif 85 /* 86 * max 4k env size is enough, but in case of nand 87 * it has to be rounded to sector size 88 */ 89 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 90 #define CONFIG_ENV_ADDR 0xC0000 91 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ 92 93 /* 94 * Default environment variables 95 */ 96 #define CONFIG_BOOTCOMMAND \ 97 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 98 "ubi part root; " \ 99 "ubifsmount ubi:root; " \ 100 "ubifsload 0x800000 ${kernel}; " \ 101 "bootm 0x800000" 102 103 #define CONFIG_MTDPARTS \ 104 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" 105 106 #define CONFIG_EXTRA_ENV_SETTINGS \ 107 "console=console=ttyS0,115200\0" \ 108 "mtdids=nand0=orion_nand\0" \ 109 "mtdparts="CONFIG_MTDPARTS \ 110 "kernel=/boot/uImage\0" \ 111 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" 112 113 /* 114 * Ethernet Driver configuration 115 */ 116 #ifdef CONFIG_CMD_NET 117 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 118 #define CONFIG_PHY_BASE_ADR 0 119 #endif /* CONFIG_CMD_NET */ 120 121 /* 122 * * SATA Driver configuration 123 * */ 124 #ifdef CONFIG_MVSATA_IDE 125 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 126 #endif /*CONFIG_MVSATA_IDE*/ 127 128 /* 129 * * RTC driver configuration 130 * */ 131 #ifdef CONFIG_CMD_DATE 132 #define CONFIG_RTC_MV 133 #endif /* CONFIG_CMD_DATE */ 134 135 #endif /* _CONFIG_GOFLEXHOME_H */ 136