1 /* 2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> 3 * 4 * Based on dockstar.h originally written by 5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 6 * 7 * Based on sheevaplug.h originally written by 8 * Prafulla Wadaskar <prafulla@marvell.com> 9 * (C) Copyright 2009 10 * Marvell Semiconductor <www.marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef _CONFIG_GOFLEXHOME_H 16 #define _CONFIG_GOFLEXHOME_H 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 22 #define CONFIG_KW88F6281 1 /* SOC Name */ 23 #define CONFIG_MACH_GOFLEXHOME /* Machine type */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* 27 * Default GPIO configuration and LED status 28 */ 29 #define GOFLEXHOME_OE_LOW (~(0)) 30 #define GOFLEXHOME_OE_HIGH (~(0)) 31 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ 32 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ 33 34 /* PHY related */ 35 #define MV88E1116_LED_FCTRL_REG 10 36 #define MV88E1116_CPRSP_CR3_REG 21 37 #define MV88E1116_MAC_CTRL_REG 21 38 #define MV88E1116_PGADR_REG 22 39 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 40 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 41 42 /* 43 * Commands configuration 44 */ 45 46 #define CONFIG_CMD_ENV 47 #define CONFIG_CMD_NAND 48 #define CONFIG_CMD_IDE 49 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ 50 51 /* 52 * mv-common.h should be defined after CMD configs since it used them 53 * to enable certain macros 54 */ 55 #include "mv-common.h" 56 57 /* 58 * Environment variables configurations 59 */ 60 #ifdef CONFIG_CMD_NAND 61 #define CONFIG_ENV_IS_IN_NAND 1 62 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 63 #else 64 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 65 #endif 66 /* 67 * max 4k env size is enough, but in case of nand 68 * it has to be rounded to sector size 69 */ 70 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 71 #define CONFIG_ENV_ADDR 0xC0000 72 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ 73 74 /* 75 * Default environment variables 76 */ 77 #define CONFIG_BOOTCOMMAND \ 78 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 79 "ubi part root; " \ 80 "ubifsmount ubi:root; " \ 81 "ubifsload 0x800000 ${kernel}; " \ 82 "bootm 0x800000" 83 84 #define CONFIG_MTDPARTS \ 85 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" 86 87 #define CONFIG_EXTRA_ENV_SETTINGS \ 88 "console=console=ttyS0,115200\0" \ 89 "mtdids=nand0=orion_nand\0" \ 90 "mtdparts="CONFIG_MTDPARTS \ 91 "kernel=/boot/uImage\0" \ 92 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" 93 94 /* 95 * Ethernet Driver configuration 96 */ 97 #ifdef CONFIG_CMD_NET 98 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 99 #define CONFIG_PHY_BASE_ADR 0 100 #endif /* CONFIG_CMD_NET */ 101 102 /* 103 * * SATA Driver configuration 104 * */ 105 #ifdef CONFIG_MVSATA_IDE 106 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 107 #endif /*CONFIG_MVSATA_IDE*/ 108 109 /* 110 * * RTC driver configuration 111 * */ 112 #ifdef CONFIG_CMD_DATE 113 #define CONFIG_RTC_MV 114 #endif /* CONFIG_CMD_DATE */ 115 116 #endif /* _CONFIG_GOFLEXHOME_H */ 117