1 /* 2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> 3 * 4 * Based on dockstar.h originally written by 5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 6 * 7 * Based on sheevaplug.h originally written by 8 * Prafulla Wadaskar <prafulla@marvell.com> 9 * (C) Copyright 2009 10 * Marvell Semiconductor <www.marvell.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef _CONFIG_GOFLEXHOME_H 16 #define _CONFIG_GOFLEXHOME_H 17 18 /* 19 * High Level Configuration Options (easy to change) 20 */ 21 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 22 #define CONFIG_KW88F6281 1 /* SOC Name */ 23 #define CONFIG_MACH_GOFLEXHOME /* Machine type */ 24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 25 26 /* 27 * Default GPIO configuration and LED status 28 */ 29 #define GOFLEXHOME_OE_LOW (~(0)) 30 #define GOFLEXHOME_OE_HIGH (~(0)) 31 #define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ 32 #define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ 33 34 /* PHY related */ 35 #define MV88E1116_LED_FCTRL_REG 10 36 #define MV88E1116_CPRSP_CR3_REG 21 37 #define MV88E1116_MAC_CTRL_REG 21 38 #define MV88E1116_PGADR_REG 22 39 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) 40 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) 41 42 /* 43 * Commands configuration 44 */ 45 46 #define CONFIG_CMD_ENV 47 #define CONFIG_CMD_NAND 48 #define CONFIG_CMD_IDE 49 #define CONFIG_CMD_DATE 50 #define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ 51 52 /* 53 * mv-common.h should be defined after CMD configs since it used them 54 * to enable certain macros 55 */ 56 #include "mv-common.h" 57 58 /* 59 * Environment variables configurations 60 */ 61 #ifdef CONFIG_CMD_NAND 62 #define CONFIG_ENV_IS_IN_NAND 1 63 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 64 #else 65 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 66 #endif 67 /* 68 * max 4k env size is enough, but in case of nand 69 * it has to be rounded to sector size 70 */ 71 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 72 #define CONFIG_ENV_ADDR 0xC0000 73 #define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ 74 75 /* 76 * Default environment variables 77 */ 78 #define CONFIG_BOOTCOMMAND \ 79 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 80 "ubi part root; " \ 81 "ubifsmount ubi:root; " \ 82 "ubifsload 0x800000 ${kernel}; " \ 83 "bootm 0x800000" 84 85 #define CONFIG_MTDPARTS \ 86 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" 87 88 #define CONFIG_EXTRA_ENV_SETTINGS \ 89 "console=console=ttyS0,115200\0" \ 90 "mtdids=nand0=orion_nand\0" \ 91 "mtdparts="CONFIG_MTDPARTS \ 92 "kernel=/boot/uImage\0" \ 93 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" 94 95 /* 96 * Ethernet Driver configuration 97 */ 98 #ifdef CONFIG_CMD_NET 99 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 100 #define CONFIG_PHY_BASE_ADR 0 101 #endif /* CONFIG_CMD_NET */ 102 103 /* 104 * * SATA Driver configuration 105 * */ 106 #ifdef CONFIG_MVSATA_IDE 107 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET 108 #endif /*CONFIG_MVSATA_IDE*/ 109 110 /* 111 * * RTC driver configuration 112 * */ 113 #ifdef CONFIG_CMD_DATE 114 #define CONFIG_RTC_MV 115 #endif /* CONFIG_CMD_DATE */ 116 117 #endif /* _CONFIG_GOFLEXHOME_H */ 118