1 /* 2 * Copyright (C) 2015 Timesys Corporation 3 * Copyright (C) 2015 General Electric Company 4 * Copyright (C) 2014 Advantech 5 * Copyright (C) 2012 Freescale Semiconductor, Inc. 6 * 7 * Configuration settings for the GE MX6Q Bx50v3 boards. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __GE_BX50V3_CONFIG_H 13 #define __GE_BX50V3_CONFIG_H 14 15 #include <asm/arch/imx-regs.h> 16 #include <asm/mach-imx/gpio.h> 17 18 #define BX50V3_BOOTARGS_EXTRA 19 #if defined(CONFIG_TARGET_GE_B450V3) 20 #define CONFIG_BOARD_NAME "General Electric B450v3" 21 #elif defined(CONFIG_TARGET_GE_B650V3) 22 #define CONFIG_BOARD_NAME "General Electric B650v3" 23 #elif defined(CONFIG_TARGET_GE_B850V3) 24 #define CONFIG_BOARD_NAME "General Electric B850v3" 25 #undef BX50V3_BOOTARGS_EXTRA 26 #define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \ 27 "video=HDMI-A-1:1024x768@60 " 28 #else 29 #define CONFIG_BOARD_NAME "General Electric BA16 Generic" 30 #endif 31 32 #define CONFIG_MXC_UART_BASE UART3_BASE 33 #define CONSOLE_DEV "ttymxc2" 34 35 #define CONFIG_SUPPORT_EMMC_BOOT 36 37 38 #include "mx6_common.h" 39 #include <linux/sizes.h> 40 41 #define CONFIG_CMDLINE_TAG 42 #define CONFIG_SETUP_MEMORY_TAGS 43 #define CONFIG_INITRD_TAG 44 #define CONFIG_REVISION_TAG 45 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 46 47 #define CONFIG_MXC_GPIO 48 #define CONFIG_MXC_UART 49 50 #define CONFIG_MXC_OCOTP 51 52 /* SATA Configs */ 53 #ifdef CONFIG_CMD_SATA 54 #define CONFIG_SYS_SATA_MAX_DEVICE 1 55 #define CONFIG_DWC_AHSATA_PORT_ID 0 56 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 57 #define CONFIG_LBA48 58 #endif 59 60 /* MMC Configs */ 61 #define CONFIG_FSL_ESDHC 62 #define CONFIG_FSL_USDHC 63 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 64 #define CONFIG_BOUNCE_BUFFER 65 66 /* USB Configs */ 67 #ifdef CONFIG_USB 68 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 69 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 70 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 71 #define CONFIG_MXC_USB_FLAGS 0 72 73 #define CONFIG_USBD_HS 74 #define CONFIG_USB_GADGET_MASS_STORAGE 75 #endif 76 77 /* Networking Configs */ 78 #ifdef CONFIG_NET 79 #define CONFIG_FEC_MXC 80 #define CONFIG_MII 81 #define IMX_FEC_BASE ENET_BASE_ADDR 82 #define CONFIG_FEC_XCV_TYPE RGMII 83 #define CONFIG_ETHPRIME "FEC" 84 #define CONFIG_FEC_MXC_PHYADDR 4 85 #define CONFIG_PHY_ATHEROS 86 #endif 87 88 /* Serial Flash */ 89 #ifdef CONFIG_CMD_SF 90 #define CONFIG_MXC_SPI 91 #define CONFIG_SF_DEFAULT_BUS 0 92 #define CONFIG_SF_DEFAULT_CS 0 93 #define CONFIG_SF_DEFAULT_SPEED 20000000 94 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 95 #endif 96 97 /* allow to overwrite serial and ethaddr */ 98 #define CONFIG_ENV_OVERWRITE 99 #define CONFIG_CONS_INDEX 1 100 101 #define CONFIG_LOADADDR 0x12000000 102 #define CONFIG_SYS_TEXT_BASE 0x17800000 103 104 #define CONFIG_EXTRA_ENV_SETTINGS \ 105 "script=boot.scr\0" \ 106 "image=/boot/uImage\0" \ 107 "uboot=u-boot.imx\0" \ 108 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ 109 "fdt_addr=0x18000000\0" \ 110 "boot_fdt=yes\0" \ 111 "ip_dyn=yes\0" \ 112 "console=" CONSOLE_DEV "\0" \ 113 "fdt_high=0xffffffff\0" \ 114 "initrd_high=0xffffffff\0" \ 115 "sddev=0\0" \ 116 "emmcdev=1\0" \ 117 "partnum=1\0" \ 118 "update_sd_firmware=" \ 119 "if test ${ip_dyn} = yes; then " \ 120 "setenv get_cmd dhcp; " \ 121 "else " \ 122 "setenv get_cmd tftp; " \ 123 "fi; " \ 124 "if mmc dev ${mmcdev}; then " \ 125 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 126 "setexpr fw_sz ${filesize} / 0x200; " \ 127 "setexpr fw_sz ${fw_sz} + 1; " \ 128 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 129 "fi; " \ 130 "fi\0" \ 131 "update_sf_uboot=" \ 132 "if tftp $loadaddr $uboot; then " \ 133 "sf probe; " \ 134 "sf erase 0 0xC0000; " \ 135 "sf write $loadaddr 0x400 $filesize; " \ 136 "echo 'U-Boot upgraded. Please reset'; " \ 137 "fi\0" \ 138 "setargs=setenv bootargs console=${console},${baudrate} " \ 139 "root=/dev/${rootdev} rw rootwait cma=128M " \ 140 BX50V3_BOOTARGS_EXTRA "\0" \ 141 "loadbootscript=" \ 142 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ 143 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ 144 " source\0" \ 145 "loadimage=" \ 146 "ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ 147 "loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \ 148 "tryboot=" \ 149 "if run loadbootscript; then " \ 150 "run bootscript; " \ 151 "else " \ 152 "if run loadimage; then " \ 153 "run doboot; " \ 154 "fi; " \ 155 "fi;\0" \ 156 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \ 157 "run setargs; " \ 158 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 159 "if run loadfdt; then " \ 160 "bootm ${loadaddr} - ${fdt_addr}; " \ 161 "else " \ 162 "if test ${boot_fdt} = try; then " \ 163 "bootm; " \ 164 "else " \ 165 "echo WARN: Cannot load the DT; " \ 166 "fi; " \ 167 "fi; " \ 168 "else " \ 169 "bootm; " \ 170 "fi;\0" \ 171 "netargs=setenv bootargs console=${console},${baudrate} " \ 172 "root=/dev/nfs " \ 173 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 174 "netboot=echo Booting from net ...; " \ 175 "run netargs; " \ 176 "if test ${ip_dyn} = yes; then " \ 177 "setenv get_cmd dhcp; " \ 178 "else " \ 179 "setenv get_cmd tftp; " \ 180 "fi; " \ 181 "${get_cmd} ${image}; " \ 182 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 183 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 184 "bootm ${loadaddr} - ${fdt_addr}; " \ 185 "else " \ 186 "if test ${boot_fdt} = try; then " \ 187 "bootm; " \ 188 "else " \ 189 "echo WARN: Cannot load the DT; " \ 190 "fi; " \ 191 "fi; " \ 192 "else " \ 193 "bootm; " \ 194 "fi;\0" \ 195 196 #define CONFIG_MMCBOOTCOMMAND \ 197 "setenv dev mmc; " \ 198 "setenv rootdev mmcblk0p${partnum}; " \ 199 \ 200 "setenv devnum ${sddev}; " \ 201 "if mmc dev ${devnum}; then " \ 202 "run tryboot; " \ 203 "setenv rootdev mmcblk1p${partnum}; " \ 204 "fi; " \ 205 \ 206 "setenv devnum ${emmcdev}; " \ 207 "if mmc dev ${devnum}; then " \ 208 "run tryboot; " \ 209 "fi; " \ 210 211 #define CONFIG_USBBOOTCOMMAND \ 212 "usb start; " \ 213 "setenv dev usb; " \ 214 "setenv devnum 0; " \ 215 "setenv rootdev sda${partnum}; " \ 216 "run tryboot; " \ 217 \ 218 CONFIG_MMCBOOTCOMMAND \ 219 "bmode usb; " \ 220 221 #ifdef CONFIG_CMD_USB 222 #define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND 223 #else 224 #define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND 225 #endif 226 227 #define CONFIG_ARP_TIMEOUT 200UL 228 229 /* Miscellaneous configurable options */ 230 #define CONFIG_SYS_LONGHELP 231 #define CONFIG_AUTO_COMPLETE 232 233 #define CONFIG_SYS_MEMTEST_START 0x10000000 234 #define CONFIG_SYS_MEMTEST_END 0x10010000 235 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 236 237 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 238 239 #define CONFIG_CMDLINE_EDITING 240 241 /* Physical Memory Map */ 242 #define CONFIG_NR_DRAM_BANKS 1 243 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 244 245 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 246 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 247 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 248 249 #define CONFIG_SYS_INIT_SP_OFFSET \ 250 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 251 #define CONFIG_SYS_INIT_SP_ADDR \ 252 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 253 254 /* environment organization */ 255 #define CONFIG_ENV_SIZE (8 * 1024) 256 #define CONFIG_ENV_OFFSET (768 * 1024) 257 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 258 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 259 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 260 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 261 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 262 263 #ifndef CONFIG_SYS_DCACHE_OFF 264 #endif 265 266 #define CONFIG_SYS_FSL_USDHC_NUM 3 267 268 /* Framebuffer */ 269 #ifdef CONFIG_VIDEO 270 #define CONFIG_VIDEO_IPUV3 271 #define CONFIG_VIDEO_BMP_RLE8 272 #define CONFIG_SPLASH_SCREEN 273 #define CONFIG_SPLASH_SCREEN_ALIGN 274 #define CONFIG_BMP_16BPP 275 #define CONFIG_VIDEO_LOGO 276 #define CONFIG_VIDEO_BMP_LOGO 277 #define CONFIG_IMX_HDMI 278 #define CONFIG_IMX_VIDEO_SKIP 279 #endif 280 281 #define CONFIG_PWM_IMX 282 #define CONFIG_IMX6_PWM_PER_CLK 66000000 283 284 #ifdef CONFIG_CMD_PCI 285 #define CONFIG_PCI_SCAN_SHOW 286 #define CONFIG_PCIE_IMX 287 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 288 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) 289 #endif 290 291 /* I2C Configs */ 292 #define CONFIG_SYS_I2C 293 #define CONFIG_SYS_I2C_MXC 294 #define CONFIG_SYS_I2C_SPEED 100000 295 #define CONFIG_SYS_I2C_MXC_I2C1 296 #define CONFIG_SYS_I2C_MXC_I2C2 297 #define CONFIG_SYS_I2C_MXC_I2C3 298 299 #define CONFIG_SYS_NUM_I2C_BUSES 9 300 #define CONFIG_SYS_I2C_MAX_HOPS 1 301 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ 302 {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \ 303 {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ 304 {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ 305 {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ 306 {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ 307 {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ 308 {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \ 309 {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \ 310 } 311 312 #define CONFIG_BCH 313 314 #endif /* __GE_BX50V3_CONFIG_H */ 315