xref: /openbmc/u-boot/include/configs/galileo.h (revision e702146e)
1 /*
2  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 /*
8  * board/config.h - configuration options, board specific
9  */
10 
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13 
14 #include <configs/x86-common.h>
15 
16 #define CONFIG_SYS_MONITOR_LEN		(1 << 20)
17 #define CONFIG_BOARD_EARLY_INIT_F
18 
19 #define CONFIG_NR_DRAM_BANKS		1
20 
21 #define CONFIG_X86_SERIAL
22 
23 /* ns16550 UART is memory-mapped in Quark SoC */
24 #undef  CONFIG_SYS_NS16550_PORT_MAPPED
25 
26 #define CONFIG_PCI_MEM_BUS		0x90000000
27 #define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
28 #define CONFIG_PCI_MEM_SIZE		0x20000000
29 
30 #define CONFIG_PCI_PREF_BUS		0xb0000000
31 #define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
32 #define CONFIG_PCI_PREF_SIZE		0x20000000
33 
34 #define CONFIG_PCI_IO_BUS		0x2000
35 #define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
36 #define CONFIG_PCI_IO_SIZE		0xe000
37 
38 #define CONFIG_SYS_EARLY_PCI_INIT
39 #define CONFIG_PCI_PNP
40 
41 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial\0" \
42 					"stdout=serial\0" \
43 					"stderr=serial\0"
44 
45 /* SATA is not supported in Quark SoC */
46 #undef CONFIG_SCSI_AHCI
47 #undef CONFIG_CMD_SCSI
48 
49 /* Video is not supported in Quark SoC */
50 #undef CONFIG_VIDEO
51 #undef CONFIG_CFB_CONSOLE
52 
53 /* SD/MMC support */
54 #define CONFIG_MMC
55 #define CONFIG_SDHCI
56 #define CONFIG_GENERIC_MMC
57 #define CONFIG_MMC_SDMA
58 #define CONFIG_CMD_MMC
59 
60 /* 10/100M Ethernet support */
61 #define CONFIG_DESIGNWARE_ETH
62 #define CONFIG_DW_ALTDESCRIPTOR
63 #define CONFIG_PHYLIB
64 
65 /* Environment configuration */
66 #undef CONFIG_ENV_IS_NOWHERE
67 #undef CONFIG_ENV_SIZE
68 #define CONFIG_ENV_IS_IN_SPI_FLASH
69 #define CONFIG_ENV_SIZE			0x1000
70 #define CONFIG_ENV_SECT_SIZE		0x1000
71 #define CONFIG_ENV_OFFSET		0
72 
73 #endif	/* __CONFIG_H */
74