1 /* 2 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> 3 * 4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 5 * 6 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 7 * 8 * Configuration for the flea3 board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include <asm/arch/imx-regs.h> 17 18 /* High Level Configuration Options */ 19 #define CONFIG_MX35 20 21 #define CONFIG_SYS_DCACHE_OFF 22 23 #define CONFIG_MACH_TYPE MACH_TYPE_FLEA3 24 25 /* Set TEXT at the beginning of the NOR flash */ 26 #define CONFIG_SYS_TEXT_BASE 0xA0000000 27 28 /* This is required to setup the ESDC controller */ 29 30 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 31 #define CONFIG_REVISION_TAG 32 #define CONFIG_SETUP_MEMORY_TAGS 33 #define CONFIG_INITRD_TAG 34 35 /* 36 * Size of malloc() pool 37 */ 38 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 39 40 /* 41 * Hardware drivers 42 */ 43 #define CONFIG_SYS_I2C 44 #define CONFIG_SYS_I2C_MXC 45 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 46 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 47 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 48 #define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */ 49 #define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe 50 #define CONFIG_MXC_SPI 51 #define CONFIG_MXC_GPIO 52 53 /* 54 * UART (console) 55 */ 56 #define CONFIG_MXC_UART 57 #define CONFIG_MXC_UART_BASE UART3_BASE 58 59 /* allow to overwrite serial and ethaddr */ 60 #define CONFIG_ENV_OVERWRITE 61 #define CONFIG_CONS_INDEX 1 62 #define CONFIG_BAUDRATE 115200 63 64 /* 65 * Command definition 66 */ 67 #define CONFIG_BOOTP_SUBNETMASK 68 #define CONFIG_BOOTP_GATEWAY 69 #define CONFIG_BOOTP_DNS 70 71 #define CONFIG_CMD_NAND 72 73 #define CONFIG_NET_RETRY_COUNT 100 74 75 76 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 77 78 /* 79 * Ethernet on SOC (FEC) 80 */ 81 #define CONFIG_FEC_MXC 82 #define IMX_FEC_BASE FEC_BASE_ADDR 83 #define CONFIG_PHYLIB 84 #define CONFIG_PHY_MICREL 85 #define CONFIG_FEC_MXC_PHYADDR 0x1 86 87 #define CONFIG_MII 88 89 #define CONFIG_ARP_TIMEOUT 200UL 90 91 /* 92 * Miscellaneous configurable options 93 */ 94 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 95 #define CONFIG_CMDLINE_EDITING 96 97 #define CONFIG_AUTO_COMPLETE 98 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 99 /* Print Buffer Size */ 100 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 101 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 102 103 #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ 104 #define CONFIG_SYS_MEMTEST_END 0x10000 105 106 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 107 108 /* 109 * Physical Memory Map 110 */ 111 #define CONFIG_NR_DRAM_BANKS 1 112 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 113 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 114 115 #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR 116 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) 117 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) 118 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 119 GENERATED_GBL_DATA_SIZE) 120 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 121 CONFIG_SYS_GBL_DATA_OFFSET) 122 123 /* 124 * MTD Command for mtdparts 125 */ 126 #define CONFIG_CMD_MTDPARTS 127 #define CONFIG_MTD_DEVICE 128 #define CONFIG_FLASH_CFI_MTD 129 #define CONFIG_MTD_PARTITIONS 130 #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" 131 #define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \ 132 "32m(rootfb)," \ 133 "64m(pcache)," \ 134 "64m(app1)," \ 135 "10m(app2),-(spool);" \ 136 "physmap-flash.0:512k(u-boot),64k(env1)," \ 137 "64k(env2),3776k(kernel1),3776k(kernel2)" 138 139 /* 140 * FLASH and environment organization 141 */ 142 #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR 143 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 144 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 145 /* Monitor at beginning of flash */ 146 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 147 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 148 149 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 150 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 151 152 /* Address and size of Redundant Environment Sector */ 153 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 154 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 155 156 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ 157 CONFIG_SYS_MONITOR_LEN) 158 159 #define CONFIG_ENV_IS_IN_FLASH 160 161 /* 162 * CFI FLASH driver setup 163 */ 164 #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ 165 #define CONFIG_FLASH_CFI_DRIVER 166 167 /* A non-standard buffered write algorithm */ 168 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ 169 #define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ 170 171 /* 172 * NAND FLASH driver setup 173 */ 174 #define CONFIG_NAND_MXC 175 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) 176 #define CONFIG_SYS_MAX_NAND_DEVICE 1 177 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) 178 #define CONFIG_MXC_NAND_HWECC 179 #define CONFIG_SYS_NAND_LARGEPAGE 180 181 /* 182 * Default environment and default scripts 183 * to update uboot and load kernel 184 */ 185 186 #define CONFIG_HOSTNAME flea3 187 #define CONFIG_EXTRA_ENV_SETTINGS \ 188 "netdev=eth0\0" \ 189 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 190 "nfsroot=${serverip}:${rootpath}\0" \ 191 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 192 "addip_sta=setenv bootargs ${bootargs} " \ 193 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 194 ":${hostname}:${netdev}:off panic=1\0" \ 195 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 196 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 197 "else run addip_sta;fi\0" \ 198 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 199 "addtty=setenv bootargs ${bootargs}" \ 200 " console=ttymxc2,${baudrate}\0" \ 201 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 202 "loadaddr=80800000\0" \ 203 "kernel_addr_r=80800000\0" \ 204 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 205 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 206 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ 207 "flash_self=run ramargs addip addtty addmtd addmisc;" \ 208 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 209 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ 210 "bootm ${kernel_addr}\0" \ 211 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 212 "run nfsargs addip addtty addmtd addmisc;" \ 213 "bootm ${kernel_addr_r}\0" \ 214 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 215 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 216 "net_self=if run net_self_load;then " \ 217 "run ramargs addip addtty addmtd addmisc;" \ 218 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ 219 "else echo Images not loades;fi\0" \ 220 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 221 "load=tftp ${loadaddr} ${u-boot}\0" \ 222 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 223 "update=protect off ${uboot_addr} +80000;" \ 224 "erase ${uboot_addr} +80000;" \ 225 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ 226 "upd=if run load;then echo Updating u-boot;if run update;" \ 227 "then echo U-Boot updated;" \ 228 "else echo Error updating u-boot !;" \ 229 "echo Board without bootloader !!;" \ 230 "fi;" \ 231 "else echo U-Boot not downloaded..exiting;fi\0" \ 232 "bootcmd=run net_nfs\0" 233 234 #endif /* __CONFIG_H */ 235