1 /* 2 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> 3 * 4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 5 * 6 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 7 * 8 * Configuration for the flea3 board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include <asm/arch/imx-regs.h> 17 18 /* High Level Configuration Options */ 19 #define CONFIG_MX35 20 21 #define CONFIG_SYS_DCACHE_OFF 22 #define CONFIG_SYS_CACHELINE_SIZE 32 23 24 #define CONFIG_DISPLAY_CPUINFO 25 26 /* Only in case the value is not present in mach-types.h */ 27 #ifndef MACH_TYPE_FLEA3 28 #define MACH_TYPE_FLEA3 3668 29 #endif 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_FLEA3 32 33 /* Set TEXT at the beginning of the NOR flash */ 34 #define CONFIG_SYS_TEXT_BASE 0xA0000000 35 36 /* This is required to setup the ESDC controller */ 37 #define CONFIG_BOARD_EARLY_INIT_F 38 39 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 40 #define CONFIG_REVISION_TAG 41 #define CONFIG_SETUP_MEMORY_TAGS 42 #define CONFIG_INITRD_TAG 43 44 /* 45 * Size of malloc() pool 46 */ 47 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 48 49 /* 50 * Hardware drivers 51 */ 52 #define CONFIG_SYS_I2C 53 #define CONFIG_SYS_I2C_MXC 54 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 55 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 56 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 57 #define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */ 58 #define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe 59 #define CONFIG_MXC_SPI 60 #define CONFIG_MXC_GPIO 61 62 /* 63 * UART (console) 64 */ 65 #define CONFIG_MXC_UART 66 #define CONFIG_MXC_UART_BASE UART3_BASE 67 68 /* allow to overwrite serial and ethaddr */ 69 #define CONFIG_ENV_OVERWRITE 70 #define CONFIG_CONS_INDEX 1 71 #define CONFIG_BAUDRATE 115200 72 73 /* 74 * Command definition 75 */ 76 #define CONFIG_BOOTP_SUBNETMASK 77 #define CONFIG_BOOTP_GATEWAY 78 #define CONFIG_BOOTP_DNS 79 80 #define CONFIG_CMD_NAND 81 82 #define CONFIG_NET_RETRY_COUNT 100 83 84 #define CONFIG_BOOTDELAY 3 85 86 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 87 88 /* 89 * Ethernet on SOC (FEC) 90 */ 91 #define CONFIG_FEC_MXC 92 #define IMX_FEC_BASE FEC_BASE_ADDR 93 #define CONFIG_PHYLIB 94 #define CONFIG_PHY_MICREL 95 #define CONFIG_FEC_MXC_PHYADDR 0x1 96 97 #define CONFIG_MII 98 99 #define CONFIG_ARP_TIMEOUT 200UL 100 101 /* 102 * Miscellaneous configurable options 103 */ 104 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 105 #define CONFIG_CMDLINE_EDITING 106 107 #define CONFIG_AUTO_COMPLETE 108 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 109 /* Print Buffer Size */ 110 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 111 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 112 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 113 114 #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ 115 #define CONFIG_SYS_MEMTEST_END 0x10000 116 117 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 118 119 /* 120 * Physical Memory Map 121 */ 122 #define CONFIG_NR_DRAM_BANKS 1 123 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 124 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 125 126 #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR 127 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) 128 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) 129 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 130 GENERATED_GBL_DATA_SIZE) 131 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 132 CONFIG_SYS_GBL_DATA_OFFSET) 133 134 /* 135 * MTD Command for mtdparts 136 */ 137 #define CONFIG_CMD_MTDPARTS 138 #define CONFIG_MTD_DEVICE 139 #define CONFIG_FLASH_CFI_MTD 140 #define CONFIG_MTD_PARTITIONS 141 #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" 142 #define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \ 143 "32m(rootfb)," \ 144 "64m(pcache)," \ 145 "64m(app1)," \ 146 "10m(app2),-(spool);" \ 147 "physmap-flash.0:512k(u-boot),64k(env1)," \ 148 "64k(env2),3776k(kernel1),3776k(kernel2)" 149 150 /* 151 * FLASH and environment organization 152 */ 153 #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR 154 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 155 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 156 /* Monitor at beginning of flash */ 157 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 158 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 159 160 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 161 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 162 163 /* Address and size of Redundant Environment Sector */ 164 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 165 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 166 167 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ 168 CONFIG_SYS_MONITOR_LEN) 169 170 #define CONFIG_ENV_IS_IN_FLASH 171 172 /* 173 * CFI FLASH driver setup 174 */ 175 #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ 176 #define CONFIG_FLASH_CFI_DRIVER 177 178 /* A non-standard buffered write algorithm */ 179 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ 180 #define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ 181 182 /* 183 * NAND FLASH driver setup 184 */ 185 #define CONFIG_NAND_MXC 186 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) 187 #define CONFIG_SYS_MAX_NAND_DEVICE 1 188 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) 189 #define CONFIG_MXC_NAND_HWECC 190 #define CONFIG_SYS_NAND_LARGEPAGE 191 192 /* 193 * Default environment and default scripts 194 * to update uboot and load kernel 195 */ 196 197 #define CONFIG_HOSTNAME flea3 198 #define CONFIG_EXTRA_ENV_SETTINGS \ 199 "netdev=eth0\0" \ 200 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 201 "nfsroot=${serverip}:${rootpath}\0" \ 202 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 203 "addip_sta=setenv bootargs ${bootargs} " \ 204 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 205 ":${hostname}:${netdev}:off panic=1\0" \ 206 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 207 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 208 "else run addip_sta;fi\0" \ 209 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 210 "addtty=setenv bootargs ${bootargs}" \ 211 " console=ttymxc2,${baudrate}\0" \ 212 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 213 "loadaddr=80800000\0" \ 214 "kernel_addr_r=80800000\0" \ 215 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 216 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 217 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ 218 "flash_self=run ramargs addip addtty addmtd addmisc;" \ 219 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 220 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ 221 "bootm ${kernel_addr}\0" \ 222 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 223 "run nfsargs addip addtty addmtd addmisc;" \ 224 "bootm ${kernel_addr_r}\0" \ 225 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 226 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 227 "net_self=if run net_self_load;then " \ 228 "run ramargs addip addtty addmtd addmisc;" \ 229 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ 230 "else echo Images not loades;fi\0" \ 231 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 232 "load=tftp ${loadaddr} ${u-boot}\0" \ 233 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 234 "update=protect off ${uboot_addr} +40000;" \ 235 "erase ${uboot_addr} +40000;" \ 236 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ 237 "upd=if run load;then echo Updating u-boot;if run update;" \ 238 "then echo U-Boot updated;" \ 239 "else echo Error updating u-boot !;" \ 240 "echo Board without bootloader !!;" \ 241 "fi;" \ 242 "else echo U-Boot not downloaded..exiting;fi\0" \ 243 "bootcmd=run net_nfs\0" 244 245 #endif /* __CONFIG_H */ 246