1 /* 2 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> 3 * 4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. 5 * 6 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> 7 * 8 * Configuration for the flea3 board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include <asm/arch/imx-regs.h> 17 18 /* High Level Configuration Options */ 19 #define CONFIG_MX35 20 21 #define CONFIG_SYS_DCACHE_OFF 22 #define CONFIG_SYS_CACHELINE_SIZE 32 23 24 #define CONFIG_DISPLAY_CPUINFO 25 26 /* Only in case the value is not present in mach-types.h */ 27 #ifndef MACH_TYPE_FLEA3 28 #define MACH_TYPE_FLEA3 3668 29 #endif 30 31 #define CONFIG_MACH_TYPE MACH_TYPE_FLEA3 32 33 /* Set TEXT at the beginning of the NOR flash */ 34 #define CONFIG_SYS_TEXT_BASE 0xA0000000 35 36 /* This is required to setup the ESDC controller */ 37 #define CONFIG_BOARD_EARLY_INIT_F 38 39 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 40 #define CONFIG_REVISION_TAG 41 #define CONFIG_SETUP_MEMORY_TAGS 42 #define CONFIG_INITRD_TAG 43 44 /* 45 * Size of malloc() pool 46 */ 47 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) 48 49 /* 50 * Hardware drivers 51 */ 52 #define CONFIG_SYS_I2C 53 #define CONFIG_SYS_I2C_MXC 54 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 55 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 56 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 57 #define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */ 58 #define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe 59 #define CONFIG_MXC_SPI 60 #define CONFIG_MXC_GPIO 61 62 /* 63 * UART (console) 64 */ 65 #define CONFIG_MXC_UART 66 #define CONFIG_MXC_UART_BASE UART3_BASE 67 68 /* allow to overwrite serial and ethaddr */ 69 #define CONFIG_ENV_OVERWRITE 70 #define CONFIG_CONS_INDEX 1 71 #define CONFIG_BAUDRATE 115200 72 73 /* 74 * Command definition 75 */ 76 #define CONFIG_CMD_PING 77 #define CONFIG_CMD_DHCP 78 #define CONFIG_BOOTP_SUBNETMASK 79 #define CONFIG_BOOTP_GATEWAY 80 #define CONFIG_BOOTP_DNS 81 82 #define CONFIG_CMD_NAND 83 #define CONFIG_CMD_CACHE 84 85 #define CONFIG_CMD_I2C 86 #define CONFIG_CMD_SPI 87 #define CONFIG_CMD_MII 88 #define CONFIG_NET_RETRY_COUNT 100 89 90 #define CONFIG_BOOTDELAY 3 91 92 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ 93 94 95 /* 96 * Ethernet on SOC (FEC) 97 */ 98 #define CONFIG_FEC_MXC 99 #define IMX_FEC_BASE FEC_BASE_ADDR 100 #define CONFIG_PHYLIB 101 #define CONFIG_PHY_MICREL 102 #define CONFIG_FEC_MXC_PHYADDR 0x1 103 104 #define CONFIG_MII 105 106 #define CONFIG_ARP_TIMEOUT 200UL 107 108 /* 109 * Miscellaneous configurable options 110 */ 111 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 112 #define CONFIG_CMDLINE_EDITING 113 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 114 115 #define CONFIG_AUTO_COMPLETE 116 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 117 /* Print Buffer Size */ 118 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 119 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 120 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 121 122 #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ 123 #define CONFIG_SYS_MEMTEST_END 0x10000 124 125 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 126 127 /* 128 * Physical Memory Map 129 */ 130 #define CONFIG_NR_DRAM_BANKS 1 131 #define PHYS_SDRAM_1 CSD0_BASE_ADDR 132 #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) 133 134 #define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR 135 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) 136 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) 137 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 138 GENERATED_GBL_DATA_SIZE) 139 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 140 CONFIG_SYS_GBL_DATA_OFFSET) 141 142 /* 143 * MTD Command for mtdparts 144 */ 145 #define CONFIG_CMD_MTDPARTS 146 #define CONFIG_MTD_DEVICE 147 #define CONFIG_FLASH_CFI_MTD 148 #define CONFIG_MTD_PARTITIONS 149 #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" 150 #define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \ 151 "32m(rootfb)," \ 152 "64m(pcache)," \ 153 "64m(app1)," \ 154 "10m(app2),-(spool);" \ 155 "physmap-flash.0:512k(u-boot),64k(env1)," \ 156 "64k(env2),3776k(kernel1),3776k(kernel2)" 157 158 /* 159 * FLASH and environment organization 160 */ 161 #define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR 162 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 163 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 164 /* Monitor at beginning of flash */ 165 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 166 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 167 168 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 169 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 170 171 /* Address and size of Redundant Environment Sector */ 172 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 173 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 174 175 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ 176 CONFIG_SYS_MONITOR_LEN) 177 178 #define CONFIG_ENV_IS_IN_FLASH 179 180 /* 181 * CFI FLASH driver setup 182 */ 183 #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ 184 #define CONFIG_FLASH_CFI_DRIVER 185 186 /* A non-standard buffered write algorithm */ 187 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ 188 #define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ 189 190 /* 191 * NAND FLASH driver setup 192 */ 193 #define CONFIG_NAND_MXC 194 #define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) 195 #define CONFIG_SYS_MAX_NAND_DEVICE 1 196 #define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) 197 #define CONFIG_MXC_NAND_HWECC 198 #define CONFIG_SYS_NAND_LARGEPAGE 199 200 /* 201 * Default environment and default scripts 202 * to update uboot and load kernel 203 */ 204 205 #define CONFIG_HOSTNAME flea3 206 #define CONFIG_EXTRA_ENV_SETTINGS \ 207 "netdev=eth0\0" \ 208 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 209 "nfsroot=${serverip}:${rootpath}\0" \ 210 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 211 "addip_sta=setenv bootargs ${bootargs} " \ 212 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 213 ":${hostname}:${netdev}:off panic=1\0" \ 214 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 215 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 216 "else run addip_sta;fi\0" \ 217 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 218 "addtty=setenv bootargs ${bootargs}" \ 219 " console=ttymxc2,${baudrate}\0" \ 220 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 221 "loadaddr=80800000\0" \ 222 "kernel_addr_r=80800000\0" \ 223 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 224 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 225 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ 226 "flash_self=run ramargs addip addtty addmtd addmisc;" \ 227 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 228 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ 229 "bootm ${kernel_addr}\0" \ 230 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 231 "run nfsargs addip addtty addmtd addmisc;" \ 232 "bootm ${kernel_addr_r}\0" \ 233 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 234 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 235 "net_self=if run net_self_load;then " \ 236 "run ramargs addip addtty addmtd addmisc;" \ 237 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ 238 "else echo Images not loades;fi\0" \ 239 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 240 "load=tftp ${loadaddr} ${u-boot}\0" \ 241 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 242 "update=protect off ${uboot_addr} +40000;" \ 243 "erase ${uboot_addr} +40000;" \ 244 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ 245 "upd=if run load;then echo Updating u-boot;if run update;" \ 246 "then echo U-Boot updated;" \ 247 "else echo Error updating u-boot !;" \ 248 "echo Board without bootloader !!;" \ 249 "fi;" \ 250 "else echo U-Boot not downloaded..exiting;fi\0" \ 251 "bootcmd=run net_nfs\0" 252 253 #endif /* __CONFIG_H */ 254