1 /* 2 * Copyright (C) 2013 Samsung Electronics 3 * 4 * Configuration settings for the SAMSUNG EXYNOS5 board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_EXYNOS5_COMMON_H 10 #define __CONFIG_EXYNOS5_COMMON_H 11 12 #define CONFIG_EXYNOS5 /* Exynos5 Family */ 13 14 #include "exynos-common.h" 15 16 #define CONFIG_SYS_CACHELINE_SIZE 64 17 #define CONFIG_EXYNOS_SPL 18 19 #ifdef FTRACE 20 #define CONFIG_TRACE 21 #define CONFIG_CMD_TRACE 22 #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) 23 #define CONFIG_TRACE_EARLY_SIZE (8 << 20) 24 #define CONFIG_TRACE_EARLY 25 #define CONFIG_TRACE_EARLY_ADDR 0x50000000 26 #endif 27 28 /* Enable ACE acceleration for SHA1 and SHA256 */ 29 #define CONFIG_EXYNOS_ACE_SHA 30 #define CONFIG_SHA_HW_ACCEL 31 32 /* Power Down Modes */ 33 #define S5P_CHECK_SLEEP 0x00000BAD 34 #define S5P_CHECK_DIDLE 0xBAD00000 35 #define S5P_CHECK_LPA 0xABAD0000 36 37 /* Offset for inform registers */ 38 #define INFORM0_OFFSET 0x800 39 #define INFORM1_OFFSET 0x804 40 #define INFORM2_OFFSET 0x808 41 #define INFORM3_OFFSET 0x80c 42 43 /* select serial console configuration */ 44 #define CONFIG_BAUDRATE 115200 45 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 46 #define CONFIG_SILENT_CONSOLE 47 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 48 #define CONFIG_CONSOLE_MUX 49 50 #define CONFIG_CMD_HASH 51 52 /* Thermal Management Unit */ 53 #define CONFIG_EXYNOS_TMU 54 #define CONFIG_CMD_DTT 55 #define CONFIG_TMU_CMD_DTT 56 57 /* MMC SPL */ 58 #define COPY_BL2_FNPTR_ADDR 0x02020030 59 #define CONFIG_SUPPORT_EMMC_BOOT 60 61 #define CONFIG_SPL_LIBCOMMON_SUPPORT 62 #define CONFIG_SPL_GPIO_SUPPORT 63 #define CONFIG_SPL_SERIAL_SUPPORT 64 #define CONFIG_SPL_LIBGENERIC_SUPPORT 65 66 /* specific .lds file */ 67 #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" 68 69 /* Boot Argument Buffer Size */ 70 /* memtest works on */ 71 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 72 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) 73 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 74 75 #define CONFIG_RD_LVL 76 77 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 78 #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE 79 #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) 80 #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE 81 #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) 82 #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE 83 #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) 84 #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE 85 #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) 86 #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE 87 #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) 88 #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE 89 #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) 90 #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE 91 #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) 92 #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE 93 94 #define CONFIG_SYS_MONITOR_BASE 0x00000000 95 96 #define CONFIG_SYS_MMC_ENV_DEV 0 97 98 #define CONFIG_SECURE_BL1_ONLY 99 100 /* Secure FW size configuration */ 101 #ifdef CONFIG_SECURE_BL1_ONLY 102 #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ 103 #else 104 #define CONFIG_SEC_FW_SIZE 0 105 #endif 106 107 /* Configuration of BL1, BL2, ENV Blocks on mmc */ 108 #define CONFIG_RES_BLOCK_SIZE (512) 109 #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ 110 #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ 111 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ 112 113 #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) 114 #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) 115 116 /* U-Boot copy size from boot Media to DRAM.*/ 117 #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) 118 #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) 119 120 #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 121 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) 122 123 /* I2C */ 124 #define CONFIG_CMD_I2C 125 #define CONFIG_SYS_I2C_S3C24X0 126 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ 127 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 128 #define CONFIG_I2C_EDID 129 130 /* SPI */ 131 #ifdef CONFIG_SPI_FLASH 132 #define CONFIG_CMD_SF 133 #define CONFIG_CMD_SPI 134 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 135 #define CONFIG_SF_DEFAULT_SPEED 50000000 136 #endif 137 138 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH 139 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 140 #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE 141 #define CONFIG_ENV_SPI_BUS 1 142 #define CONFIG_ENV_SPI_MAX_HZ 50000000 143 #endif 144 145 /* Ethernet Controllor Driver */ 146 #ifdef CONFIG_CMD_NET 147 #define CONFIG_SMC911X 148 #define CONFIG_SMC911X_BASE 0x5000000 149 #define CONFIG_SMC911X_16_BIT 150 #define CONFIG_ENV_SROM_BANK 1 151 #endif /*CONFIG_CMD_NET*/ 152 153 /* SHA hashing */ 154 #define CONFIG_CMD_HASH 155 #define CONFIG_HASH_VERIFY 156 #define CONFIG_SHA1 157 #define CONFIG_SHA256 158 159 /* Enable Time Command */ 160 #define CONFIG_CMD_TIME 161 162 163 /* USB */ 164 #define CONFIG_CMD_USB 165 #define CONFIG_USB_STORAGE 166 #define CONFIG_USB_XHCI_DWC3 167 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 168 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 169 170 #define CONFIG_USB_HOST_ETHER 171 #define CONFIG_USB_ETHER_ASIX 172 #define CONFIG_USB_ETHER_SMSC95XX 173 174 /* USB boot mode */ 175 #define CONFIG_USB_BOOTING 176 #define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 177 #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 178 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 179 180 /* Enable FIT support and comparison */ 181 #define CONFIG_FIT 182 #define CONFIG_FIT_BEST_MATCH 183 184 #define BOOT_TARGET_DEVICES(func) \ 185 func(MMC, mmc, 1) \ 186 func(MMC, mmc, 0) \ 187 func(PXE, pxe, na) \ 188 func(DHCP, dhcp, na) 189 190 #include <config_distro_bootcmd.h> 191 192 #ifndef MEM_LAYOUT_ENV_SETTINGS 193 /* 2GB RAM, bootm size of 256M, load scripts after that */ 194 #define MEM_LAYOUT_ENV_SETTINGS \ 195 "bootm_size=0x10000000\0" \ 196 "kernel_addr_r=0x42000000\0" \ 197 "fdt_addr_r=0x43000000\0" \ 198 "ramdisk_addr_r=0x43300000\0" \ 199 "scriptaddr=0x50000000\0" \ 200 "pxefile_addr_r=0x51000000\0" 201 #endif 202 203 #ifndef EXYNOS_DEVICE_SETTINGS 204 #define EXYNOS_DEVICE_SETTINGS \ 205 "stdin=serial\0" \ 206 "stdout=serial\0" \ 207 "stderr=serial\0" 208 #endif 209 210 #ifndef EXYNOS_FDTFILE_SETTING 211 #define EXYNOS_FDTFILE_SETTING 212 #endif 213 214 #define CONFIG_EXTRA_ENV_SETTINGS \ 215 EXYNOS_DEVICE_SETTINGS \ 216 EXYNOS_FDTFILE_SETTING \ 217 MEM_LAYOUT_ENV_SETTINGS \ 218 BOOTENV 219 220 #endif /* __CONFIG_EXYNOS5_COMMON_H */ 221