1 /* 2 * Copyright (C) 2013 Samsung Electronics 3 * 4 * Configuration settings for the SAMSUNG EXYNOS5 board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_EXYNOS5_COMMON_H 10 #define __CONFIG_EXYNOS5_COMMON_H 11 12 #define CONFIG_EXYNOS5 /* Exynos5 Family */ 13 14 #include "exynos-common.h" 15 16 #define CONFIG_EXYNOS_SPL 17 18 #ifdef FTRACE 19 #define CONFIG_TRACE 20 #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) 21 #define CONFIG_TRACE_EARLY_SIZE (8 << 20) 22 #define CONFIG_TRACE_EARLY 23 #define CONFIG_TRACE_EARLY_ADDR 0x50000000 24 #endif 25 26 /* Enable ACE acceleration for SHA1 and SHA256 */ 27 #define CONFIG_EXYNOS_ACE_SHA 28 29 /* Power Down Modes */ 30 #define S5P_CHECK_SLEEP 0x00000BAD 31 #define S5P_CHECK_DIDLE 0xBAD00000 32 #define S5P_CHECK_LPA 0xABAD0000 33 34 /* Offset for inform registers */ 35 #define INFORM0_OFFSET 0x800 36 #define INFORM1_OFFSET 0x804 37 #define INFORM2_OFFSET 0x808 38 #define INFORM3_OFFSET 0x80c 39 40 /* select serial console configuration */ 41 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 42 43 /* Thermal Management Unit */ 44 #define CONFIG_EXYNOS_TMU 45 46 /* MMC SPL */ 47 #define COPY_BL2_FNPTR_ADDR 0x02020030 48 #define CONFIG_SUPPORT_EMMC_BOOT 49 50 /* specific .lds file */ 51 52 /* Boot Argument Buffer Size */ 53 /* memtest works on */ 54 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 55 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) 56 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 57 58 #define CONFIG_RD_LVL 59 60 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 61 #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE 62 #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) 63 #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE 64 #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) 65 #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE 66 #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) 67 #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE 68 #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) 69 #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE 70 #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) 71 #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE 72 #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) 73 #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE 74 #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) 75 #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE 76 77 #define CONFIG_SYS_MONITOR_BASE 0x00000000 78 79 #define CONFIG_SYS_MMC_ENV_DEV 0 80 81 #define CONFIG_SECURE_BL1_ONLY 82 83 /* Secure FW size configuration */ 84 #ifdef CONFIG_SECURE_BL1_ONLY 85 #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ 86 #else 87 #define CONFIG_SEC_FW_SIZE 0 88 #endif 89 90 /* Configuration of BL1, BL2, ENV Blocks on mmc */ 91 #define CONFIG_RES_BLOCK_SIZE (512) 92 #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ 93 #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ 94 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ 95 96 #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) 97 #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) 98 99 /* U-Boot copy size from boot Media to DRAM.*/ 100 #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) 101 #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) 102 103 #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 104 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) 105 106 /* I2C */ 107 #define CONFIG_SYS_I2C_S3C24X0 108 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ 109 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 110 111 /* SPI */ 112 #ifdef CONFIG_SPI_FLASH 113 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 114 #define CONFIG_SF_DEFAULT_SPEED 50000000 115 #endif 116 117 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH 118 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 119 #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE 120 #define CONFIG_ENV_SPI_BUS 1 121 #define CONFIG_ENV_SPI_MAX_HZ 50000000 122 #endif 123 124 /* Ethernet Controllor Driver */ 125 #ifdef CONFIG_CMD_NET 126 #define CONFIG_SMC911X 127 #define CONFIG_SMC911X_BASE 0x5000000 128 #define CONFIG_SMC911X_16_BIT 129 #define CONFIG_ENV_SROM_BANK 1 130 #endif /*CONFIG_CMD_NET*/ 131 132 /* Enable Time Command */ 133 134 /* USB */ 135 136 /* USB boot mode */ 137 #define CONFIG_USB_BOOTING 138 #define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 139 #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 140 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 141 142 #define BOOT_TARGET_DEVICES(func) \ 143 func(MMC, mmc, 1) \ 144 func(MMC, mmc, 0) \ 145 func(PXE, pxe, na) \ 146 func(DHCP, dhcp, na) 147 148 #include <config_distro_bootcmd.h> 149 150 #ifndef MEM_LAYOUT_ENV_SETTINGS 151 /* 2GB RAM, bootm size of 256M, load scripts after that */ 152 #define MEM_LAYOUT_ENV_SETTINGS \ 153 "bootm_size=0x10000000\0" \ 154 "kernel_addr_r=0x42000000\0" \ 155 "fdt_addr_r=0x43000000\0" \ 156 "ramdisk_addr_r=0x43300000\0" \ 157 "scriptaddr=0x50000000\0" \ 158 "pxefile_addr_r=0x51000000\0" 159 #endif 160 161 #ifndef EXYNOS_DEVICE_SETTINGS 162 #define EXYNOS_DEVICE_SETTINGS \ 163 "stdin=serial\0" \ 164 "stdout=serial\0" \ 165 "stderr=serial\0" 166 #endif 167 168 #ifndef EXYNOS_FDTFILE_SETTING 169 #define EXYNOS_FDTFILE_SETTING 170 #endif 171 172 #define CONFIG_EXTRA_ENV_SETTINGS \ 173 EXYNOS_DEVICE_SETTINGS \ 174 EXYNOS_FDTFILE_SETTING \ 175 MEM_LAYOUT_ENV_SETTINGS \ 176 BOOTENV 177 178 #endif /* __CONFIG_EXYNOS5_COMMON_H */ 179