1 /*
2  * Copyright (C) 2013 Samsung Electronics
3  *
4  * Configuration settings for the SAMSUNG EXYNOS5 board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_EXYNOS5_COMMON_H
10 #define __CONFIG_EXYNOS5_COMMON_H
11 
12 #define CONFIG_EXYNOS5			/* Exynos5 Family */
13 
14 #include "exynos-common.h"
15 
16 #define CONFIG_EXYNOS_SPL
17 
18 #ifdef FTRACE
19 #define CONFIG_TRACE
20 #define CONFIG_CMD_TRACE
21 #define CONFIG_TRACE_BUFFER_SIZE	(16 << 20)
22 #define CONFIG_TRACE_EARLY_SIZE		(8 << 20)
23 #define CONFIG_TRACE_EARLY
24 #define CONFIG_TRACE_EARLY_ADDR		0x50000000
25 #endif
26 
27 /* Enable ACE acceleration for SHA1 and SHA256 */
28 #define CONFIG_EXYNOS_ACE_SHA
29 #define CONFIG_SHA_HW_ACCEL
30 
31 /* Power Down Modes */
32 #define S5P_CHECK_SLEEP			0x00000BAD
33 #define S5P_CHECK_DIDLE			0xBAD00000
34 #define S5P_CHECK_LPA			0xABAD0000
35 
36 /* Offset for inform registers */
37 #define INFORM0_OFFSET			0x800
38 #define INFORM1_OFFSET			0x804
39 #define INFORM2_OFFSET			0x808
40 #define INFORM3_OFFSET			0x80c
41 
42 /* select serial console configuration */
43 #define CONFIG_BAUDRATE			115200
44 #define EXYNOS5_DEFAULT_UART_OFFSET	0x010000
45 #define CONFIG_SILENT_CONSOLE
46 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
47 #define CONFIG_CONSOLE_MUX
48 
49 #define CONFIG_CMD_HASH
50 
51 /* Thermal Management Unit */
52 #define CONFIG_EXYNOS_TMU
53 #define CONFIG_CMD_DTT
54 #define CONFIG_TMU_CMD_DTT
55 
56 /* MMC SPL */
57 #define COPY_BL2_FNPTR_ADDR	0x02020030
58 #define CONFIG_SUPPORT_EMMC_BOOT
59 
60 /* specific .lds file */
61 #define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
62 
63 /* Boot Argument Buffer Size */
64 /* memtest works on */
65 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
66 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
67 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
68 
69 #define CONFIG_RD_LVL
70 
71 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
72 #define PHYS_SDRAM_1_SIZE	SDRAM_BANK_SIZE
73 #define PHYS_SDRAM_2		(CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
74 #define PHYS_SDRAM_2_SIZE	SDRAM_BANK_SIZE
75 #define PHYS_SDRAM_3		(CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
76 #define PHYS_SDRAM_3_SIZE	SDRAM_BANK_SIZE
77 #define PHYS_SDRAM_4		(CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
78 #define PHYS_SDRAM_4_SIZE	SDRAM_BANK_SIZE
79 #define PHYS_SDRAM_5		(CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
80 #define PHYS_SDRAM_5_SIZE	SDRAM_BANK_SIZE
81 #define PHYS_SDRAM_6		(CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
82 #define PHYS_SDRAM_6_SIZE	SDRAM_BANK_SIZE
83 #define PHYS_SDRAM_7		(CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
84 #define PHYS_SDRAM_7_SIZE	SDRAM_BANK_SIZE
85 #define PHYS_SDRAM_8		(CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
86 #define PHYS_SDRAM_8_SIZE	SDRAM_BANK_SIZE
87 
88 #define CONFIG_SYS_MONITOR_BASE	0x00000000
89 
90 #define CONFIG_SYS_MMC_ENV_DEV		0
91 
92 #define CONFIG_SECURE_BL1_ONLY
93 
94 /* Secure FW size configuration */
95 #ifdef CONFIG_SECURE_BL1_ONLY
96 #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
97 #else
98 #define CONFIG_SEC_FW_SIZE 0
99 #endif
100 
101 /* Configuration of BL1, BL2, ENV Blocks on mmc */
102 #define CONFIG_RES_BLOCK_SIZE	(512)
103 #define CONFIG_BL1_SIZE	(16 << 10) /*16 K reserved for BL1*/
104 #define CONFIG_BL2_SIZE	(512UL << 10UL) /* 512 KB */
105 #define CONFIG_ENV_SIZE	(16 << 10) /* 16 KB */
106 
107 #define CONFIG_BL1_OFFSET	(CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
108 #define CONFIG_BL2_OFFSET	(CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
109 
110 /* U-Boot copy size from boot Media to DRAM.*/
111 #define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
112 #define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
113 
114 #define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
115 #define SPI_FLASH_UBOOT_POS	(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
116 
117 /* I2C */
118 #define CONFIG_SYS_I2C_S3C24X0
119 #define CONFIG_SYS_I2C_S3C24X0_SPEED	100000		/* 100 Kbps */
120 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
121 
122 /* SPI */
123 #ifdef CONFIG_SPI_FLASH
124 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
125 #define CONFIG_SF_DEFAULT_SPEED		50000000
126 #endif
127 
128 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
129 #define CONFIG_ENV_SPI_MODE	SPI_MODE_0
130 #define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
131 #define CONFIG_ENV_SPI_BUS	1
132 #define CONFIG_ENV_SPI_MAX_HZ	50000000
133 #endif
134 
135 /* Ethernet Controllor Driver */
136 #ifdef CONFIG_CMD_NET
137 #define CONFIG_SMC911X
138 #define CONFIG_SMC911X_BASE		0x5000000
139 #define CONFIG_SMC911X_16_BIT
140 #define CONFIG_ENV_SROM_BANK		1
141 #endif /*CONFIG_CMD_NET*/
142 
143 /* SHA hashing */
144 #define CONFIG_CMD_HASH
145 #define CONFIG_HASH_VERIFY
146 #define CONFIG_SHA1
147 #define CONFIG_SHA256
148 
149 /* Enable Time Command */
150 
151 /* USB */
152 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
153 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
154 
155 #define CONFIG_USB_HOST_ETHER
156 #define CONFIG_USB_ETHER_ASIX
157 #define CONFIG_USB_ETHER_SMSC95XX
158 #define CONFIG_USB_ETHER_RTL8152
159 
160 /* USB boot mode */
161 #define CONFIG_USB_BOOTING
162 #define EXYNOS_COPY_USB_FNPTR_ADDR	0x02020070
163 #define EXYNOS_USB_SECONDARY_BOOT	0xfeed0002
164 #define EXYNOS_IRAM_SECONDARY_BASE	0x02020018
165 
166 #define BOOT_TARGET_DEVICES(func) \
167 	func(MMC, mmc, 1) \
168 	func(MMC, mmc, 0) \
169 	func(PXE, pxe, na) \
170 	func(DHCP, dhcp, na)
171 
172 #include <config_distro_bootcmd.h>
173 
174 #ifndef MEM_LAYOUT_ENV_SETTINGS
175 /* 2GB RAM, bootm size of 256M, load scripts after that */
176 #define MEM_LAYOUT_ENV_SETTINGS \
177 	"bootm_size=0x10000000\0" \
178 	"kernel_addr_r=0x42000000\0" \
179 	"fdt_addr_r=0x43000000\0" \
180 	"ramdisk_addr_r=0x43300000\0" \
181 	"scriptaddr=0x50000000\0" \
182 	"pxefile_addr_r=0x51000000\0"
183 #endif
184 
185 #ifndef EXYNOS_DEVICE_SETTINGS
186 #define EXYNOS_DEVICE_SETTINGS \
187 	"stdin=serial\0" \
188 	"stdout=serial\0" \
189 	"stderr=serial\0"
190 #endif
191 
192 #ifndef EXYNOS_FDTFILE_SETTING
193 #define EXYNOS_FDTFILE_SETTING
194 #endif
195 
196 #define CONFIG_EXTRA_ENV_SETTINGS \
197 	EXYNOS_DEVICE_SETTINGS \
198 	EXYNOS_FDTFILE_SETTING \
199 	MEM_LAYOUT_ENV_SETTINGS \
200 	BOOTENV
201 
202 #endif	/* __CONFIG_EXYNOS5_COMMON_H */
203