1 /* 2 * (C) Copyright 2011 3 * egnite GmbH <info@egnite.de> 4 * 5 * Configuation settings for Ethernut 5 with AT91SAM9XE. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include <asm/hardware.h> 14 15 #define CONFIG_SYS_GENERIC_BOARD 16 17 /* The first stage boot loader expects u-boot running at this address. */ 18 #define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */ 19 20 /* The first stage boot loader takes care of low level initialization. */ 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 23 /* Set our official architecture number. */ 24 #define MACH_TYPE_ETHERNUT5 1971 25 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 26 27 /* CPU information */ 28 #define CONFIG_DISPLAY_CPUINFO /* Display at console. */ 29 #define CONFIG_ARCH_CPU_INIT 30 31 /* ARM asynchronous clock */ 32 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 33 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ 34 35 /* 32kB internal SRAM */ 36 #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ 37 #define CONFIG_SRAM_SIZE (32 << 10) 38 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \ 39 GENERATED_GBL_DATA_SIZE) 40 41 /* 128MB SDRAM in 1 bank */ 42 #define CONFIG_NR_DRAM_BANKS 1 43 #define CONFIG_SYS_SDRAM_BASE 0x20000000 44 #define CONFIG_SYS_SDRAM_SIZE (128 << 20) 45 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE 46 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR 47 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) 48 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 49 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE \ 50 - CONFIG_SYS_MALLOC_LEN) 51 52 /* 512kB on-chip NOR flash */ 53 # define CONFIG_SYS_MAX_FLASH_BANKS 1 54 # define CONFIG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ 55 # define CONFIG_AT91_EFLASH 56 # define CONFIG_SYS_MAX_FLASH_SECT 32 57 # define CONFIG_SYS_FLASH_PROTECTION /* First stage loader in sector 0 */ 58 # define CONFIG_EFLASH_PROTSECTORS 1 59 60 /* 512kB DataFlash at NPCS0 */ 61 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 62 #define CONFIG_HAS_DATAFLASH 63 #define CONFIG_SPI_FLASH_ATMEL 64 #define CONFIG_ATMEL_DATAFLASH_SPI 65 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 66 #define DATAFLASH_TCSS (0x1a << 16) 67 #define DATAFLASH_TCHS (0x1 << 24) 68 69 #define CONFIG_ENV_IS_IN_SPI_FLASH 70 #define CONFIG_ENV_OFFSET 0x3DE000 71 #define CONFIG_ENV_SECT_SIZE (132 << 10) 72 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 73 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 74 + CONFIG_ENV_OFFSET) 75 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 76 + 0x042000) 77 78 /* SPI */ 79 #define CONFIG_ATMEL_SPI 80 #define AT91_SPI_CLK 15000000 81 82 /* Serial port */ 83 #define CONFIG_ATMEL_USART 84 #define CONFIG_USART3 /* USART 3 is DBGU */ 85 #define CONFIG_BAUDRATE 115200 86 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 87 #define CONFIG_USART_ID ATMEL_ID_SYS 88 89 /* Misc. hardware drivers */ 90 #define CONFIG_AT91_GPIO 91 92 /* Command line configuration */ 93 #define CONFIG_CMD_JFFS2 94 #define CONFIG_CMD_MII 95 #define CONFIG_CMD_MTDPARTS 96 #define CONFIG_CMD_NAND 97 #define CONFIG_CMD_SPI 98 99 #ifndef MINIMAL_LOADER 100 #define CONFIG_CMD_ASKENV 101 #define CONFIG_CMD_BSP 102 #define CONFIG_CMD_CACHE 103 #define CONFIG_CMD_CDP 104 #define CONFIG_CMD_DATE 105 #define CONFIG_CMD_DHCP 106 #define CONFIG_CMD_DNS 107 #define CONFIG_CMD_EXT2 108 #define CONFIG_CMD_FAT 109 #define CONFIG_CMD_I2C 110 #define CONFIG_CMD_MMC 111 #define CONFIG_CMD_PING 112 #define CONFIG_CMD_RARP 113 #define CONFIG_CMD_REISER 114 #define CONFIG_CMD_SAVES 115 #define CONFIG_CMD_SF 116 #define CONFIG_CMD_SNTP 117 #define CONFIG_CMD_UBI 118 #define CONFIG_CMD_UBIFS 119 #define CONFIG_CMD_UNZIP 120 #define CONFIG_CMD_USB 121 #endif 122 123 /* NAND flash */ 124 #ifdef CONFIG_CMD_NAND 125 #define CONFIG_SYS_MAX_NAND_DEVICE 1 126 #define CONFIG_SYS_NAND_BASE 0x40000000 127 #define CONFIG_SYS_NAND_DBW_8 128 #define CONFIG_NAND_ATMEL 129 /* our ALE is AD21 */ 130 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 131 /* our CLE is AD22 */ 132 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 133 #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) 134 #endif 135 136 /* JFFS2 */ 137 #ifdef CONFIG_CMD_JFFS2 138 #define CONFIG_JFFS2_CMDLINE 139 #define CONFIG_JFFS2_NAND 140 #endif 141 142 /* Ethernet */ 143 #define CONFIG_NET_RETRY_COUNT 20 144 #define CONFIG_MACB 145 #define CONFIG_RMII 146 #define CONFIG_PHY_ID 0 147 #define CONFIG_MACB_SEARCH_PHY 148 149 /* MMC */ 150 #ifdef CONFIG_CMD_MMC 151 #define CONFIG_MMC 152 #define CONFIG_GENERIC_MMC 153 #define CONFIG_GENERIC_ATMEL_MCI 154 #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 155 #endif 156 157 /* USB */ 158 #ifdef CONFIG_CMD_USB 159 #define CONFIG_USB_ATMEL 160 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 161 #define CONFIG_USB_OHCI_NEW 162 #define CONFIG_SYS_USB_OHCI_CPU_INIT 163 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 164 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "host" 165 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 166 #define CONFIG_USB_STORAGE 167 #endif 168 169 /* RTC */ 170 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP) 171 #define CONFIG_RTC_PCF8563 172 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 173 #endif 174 175 /* I2C */ 176 #define CONFIG_SYS_MAX_I2C_BUS 1 177 178 #define CONFIG_SYS_I2C 179 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 180 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 181 #define CONFIG_SYS_I2C_SOFT_SLAVE 0 182 183 #define I2C_SOFT_DECLARATIONS 184 185 #define GPIO_I2C_SCL AT91_PIO_PORTA, 24 186 #define GPIO_I2C_SDA AT91_PIO_PORTA, 23 187 188 #define I2C_INIT { \ 189 at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \ 190 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ 191 at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \ 192 at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \ 193 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ 194 } 195 196 #define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTA, 23, 0) 197 #define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTA, 23, 0) 198 #define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) 199 #define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTA, 23, bit) 200 #define I2C_DELAY udelay(100) 201 #define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23) 202 203 /* DHCP/BOOTP options */ 204 #ifdef CONFIG_CMD_DHCP 205 #define CONFIG_BOOTP_BOOTFILESIZE 206 #define CONFIG_BOOTP_BOOTPATH 207 #define CONFIG_BOOTP_GATEWAY 208 #define CONFIG_BOOTP_HOSTNAME 209 #define CONFIG_SYS_AUTOLOAD "n" 210 #endif 211 212 /* File systems */ 213 #define CONFIG_MTD_DEVICE 214 #define CONFIG_MTD_PARTITIONS 215 #if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND) 216 #define MTDIDS_DEFAULT "nand0=atmel_nand" 217 #define MTDPARTS_DEFAULT "mtdparts=atmel_nand:-(root)" 218 #endif 219 #if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \ 220 defined(CONFIG_CMD_USB) || defined(CONFIG_MMC) 221 #define CONFIG_DOS_PARTITION 222 #endif 223 #define CONFIG_LZO 224 #define CONFIG_RBTREE 225 226 /* Boot command */ 227 #define CONFIG_BOOTDELAY 3 228 #define CONFIG_CMDLINE_TAG 229 #define CONFIG_SETUP_MEMORY_TAGS 230 #define CONFIG_INITRD_TAG 231 #define CONFIG_BOOTCOMMAND "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm" 232 #if defined(CONFIG_CMD_NAND) 233 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 234 "root=/dev/mtdblock0 " \ 235 MTDPARTS_DEFAULT \ 236 " rw rootfstype=jffs2" 237 #endif 238 239 /* Misc. u-boot settings */ 240 #define CONFIG_SYS_PROMPT "U-Boot> " 241 #define CONFIG_SYS_HUSH_PARSER 242 #define CONFIG_SYS_CBSIZE 256 243 #define CONFIG_SYS_MAXARGS 16 244 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ 245 + sizeof(CONFIG_SYS_PROMPT)) 246 #define CONFIG_SYS_LONGHELP 247 #define CONFIG_CMDLINE_EDITING 248 249 #endif 250