1 /* 2 * (C) Copyright 2011 3 * egnite GmbH <info@egnite.de> 4 * 5 * Configuation settings for Ethernut 5 with AT91SAM9XE. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include <asm/hardware.h> 14 15 #define CONFIG_SYS_GENERIC_BOARD 16 17 /* The first stage boot loader expects u-boot running at this address. */ 18 #define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */ 19 20 /* The first stage boot loader takes care of low level initialization. */ 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 23 /* Set our official architecture number. */ 24 #define MACH_TYPE_ETHERNUT5 1971 25 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 26 27 /* CPU information */ 28 #define CONFIG_DISPLAY_CPUINFO /* Display at console. */ 29 #define CONFIG_ARCH_CPU_INIT 30 31 /* ARM asynchronous clock */ 32 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 33 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ 34 35 /* 32kB internal SRAM */ 36 #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ 37 #define CONFIG_SRAM_SIZE (32 << 10) 38 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \ 39 GENERATED_GBL_DATA_SIZE) 40 41 /* 128MB SDRAM in 1 bank */ 42 #define CONFIG_NR_DRAM_BANKS 1 43 #define CONFIG_SYS_SDRAM_BASE 0x20000000 44 #define CONFIG_SYS_SDRAM_SIZE (128 << 20) 45 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE 46 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR 47 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) 48 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 49 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE \ 50 - CONFIG_SYS_MALLOC_LEN) 51 52 /* 512kB on-chip NOR flash */ 53 # define CONFIG_SYS_MAX_FLASH_BANKS 1 54 # define CONFIG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ 55 # define CONFIG_AT91_EFLASH 56 # define CONFIG_SYS_MAX_FLASH_SECT 32 57 # define CONFIG_SYS_FLASH_PROTECTION /* First stage loader in sector 0 */ 58 # define CONFIG_EFLASH_PROTSECTORS 1 59 60 /* 512kB DataFlash at NPCS0 */ 61 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 62 #define CONFIG_HAS_DATAFLASH 63 #define CONFIG_SPI_FLASH 64 #define CONFIG_SPI_FLASH_ATMEL 65 #define CONFIG_ATMEL_DATAFLASH_SPI 66 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 67 #define DATAFLASH_TCSS (0x1a << 16) 68 #define DATAFLASH_TCHS (0x1 << 24) 69 70 #define CONFIG_ENV_IS_IN_SPI_FLASH 71 #define CONFIG_ENV_OFFSET 0x3DE000 72 #define CONFIG_ENV_SECT_SIZE (132 << 10) 73 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 74 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 75 + CONFIG_ENV_OFFSET) 76 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 77 + 0x042000) 78 79 /* SPI */ 80 #define CONFIG_ATMEL_SPI 81 #define AT91_SPI_CLK 15000000 82 83 /* Serial port */ 84 #define CONFIG_ATMEL_USART 85 #define CONFIG_USART3 /* USART 3 is DBGU */ 86 #define CONFIG_BAUDRATE 115200 87 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 88 #define CONFIG_USART_ID ATMEL_ID_SYS 89 90 /* Misc. hardware drivers */ 91 #define CONFIG_AT91_GPIO 92 93 /* Command line configuration */ 94 #include <config_cmd_default.h> 95 #undef CONFIG_CMD_BDI 96 #undef CONFIG_CMD_FPGA 97 #undef CONFIG_CMD_LOADS 98 99 #define CONFIG_CMD_JFFS2 100 #define CONFIG_CMD_MII 101 #define CONFIG_CMD_MTDPARTS 102 #define CONFIG_CMD_NAND 103 #define CONFIG_CMD_SPI 104 105 #ifdef MINIMAL_LOADER 106 #undef CONFIG_CMD_CONSOLE 107 #undef CONFIG_CMD_EDITENV 108 #undef CONFIG_CMD_IMI 109 #undef CONFIG_CMD_ITEST 110 #undef CONFIG_CMD_IMLS 111 #undef CONFIG_CMD_LOADB 112 #undef CONFIG_CMD_LOADS 113 #undef CONFIG_CMD_NFS 114 #undef CONFIG_CMD_SETGETDCR 115 #undef CONFIG_CMD_XIMG 116 #else 117 #define CONFIG_CMD_ASKENV 118 #define CONFIG_CMD_BSP 119 #define CONFIG_CMD_CACHE 120 #define CONFIG_CMD_CDP 121 #define CONFIG_CMD_DATE 122 #define CONFIG_CMD_DHCP 123 #define CONFIG_CMD_DNS 124 #define CONFIG_CMD_EXT2 125 #define CONFIG_CMD_FAT 126 #define CONFIG_CMD_I2C 127 #define CONFIG_CMD_MMC 128 #define CONFIG_CMD_PING 129 #define CONFIG_CMD_RARP 130 #define CONFIG_CMD_REISER 131 #define CONFIG_CMD_SAVES 132 #define CONFIG_CMD_SETEXPR 133 #define CONFIG_CMD_SF 134 #define CONFIG_CMD_SNTP 135 #define CONFIG_CMD_UBI 136 #define CONFIG_CMD_UBIFS 137 #define CONFIG_CMD_UNZIP 138 #define CONFIG_CMD_USB 139 #endif 140 141 /* NAND flash */ 142 #ifdef CONFIG_CMD_NAND 143 #define CONFIG_SYS_MAX_NAND_DEVICE 1 144 #define CONFIG_SYS_NAND_BASE 0x40000000 145 #define CONFIG_SYS_NAND_DBW_8 146 #define CONFIG_NAND_ATMEL 147 /* our ALE is AD21 */ 148 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 149 /* our CLE is AD22 */ 150 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 151 #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) 152 #endif 153 154 /* JFFS2 */ 155 #ifdef CONFIG_CMD_JFFS2 156 #define CONFIG_MTD_NAND_ECC_JFFS2 157 #define CONFIG_JFFS2_CMDLINE 158 #define CONFIG_JFFS2_NAND 159 #endif 160 161 /* Ethernet */ 162 #define CONFIG_NET_RETRY_COUNT 20 163 #define CONFIG_MACB 164 #define CONFIG_RMII 165 #define CONFIG_PHY_ID 0 166 #define CONFIG_MACB_SEARCH_PHY 167 168 /* MMC */ 169 #ifdef CONFIG_CMD_MMC 170 #define CONFIG_MMC 171 #define CONFIG_GENERIC_MMC 172 #define CONFIG_GENERIC_ATMEL_MCI 173 #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 174 #endif 175 176 /* USB */ 177 #ifdef CONFIG_CMD_USB 178 #define CONFIG_USB_ATMEL 179 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 180 #define CONFIG_USB_OHCI_NEW 181 #define CONFIG_SYS_USB_OHCI_CPU_INIT 182 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 183 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "host" 184 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 185 #define CONFIG_USB_STORAGE 186 #endif 187 188 /* RTC */ 189 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP) 190 #define CONFIG_RTC_PCF8563 191 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 192 #endif 193 194 /* I2C */ 195 #define CONFIG_SYS_MAX_I2C_BUS 1 196 197 #define CONFIG_SYS_I2C 198 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 199 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 200 #define CONFIG_SYS_I2C_SOFT_SLAVE 0 201 202 #define I2C_SOFT_DECLARATIONS 203 204 #define GPIO_I2C_SCL AT91_PIO_PORTA, 24 205 #define GPIO_I2C_SDA AT91_PIO_PORTA, 23 206 207 #define I2C_INIT { \ 208 at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \ 209 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ 210 at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \ 211 at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \ 212 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ 213 } 214 215 #define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTA, 23, 0) 216 #define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTA, 23, 0) 217 #define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) 218 #define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTA, 23, bit) 219 #define I2C_DELAY udelay(100) 220 #define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23) 221 222 /* DHCP/BOOTP options */ 223 #ifdef CONFIG_CMD_DHCP 224 #define CONFIG_BOOTP_BOOTFILESIZE 225 #define CONFIG_BOOTP_BOOTPATH 226 #define CONFIG_BOOTP_GATEWAY 227 #define CONFIG_BOOTP_HOSTNAME 228 #define CONFIG_SYS_AUTOLOAD "n" 229 #endif 230 231 /* File systems */ 232 #define CONFIG_MTD_DEVICE 233 #define CONFIG_MTD_PARTITIONS 234 #if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND) 235 #define MTDIDS_DEFAULT "nand0=atmel_nand" 236 #define MTDPARTS_DEFAULT "mtdparts=atmel_nand:-(root)" 237 #endif 238 #if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \ 239 defined(CONFIG_CMD_USB) || defined(CONFIG_MMC) 240 #define CONFIG_DOS_PARTITION 241 #endif 242 #define CONFIG_LZO 243 #define CONFIG_RBTREE 244 245 /* Boot command */ 246 #define CONFIG_BOOTDELAY 3 247 #define CONFIG_CMDLINE_TAG 248 #define CONFIG_SETUP_MEMORY_TAGS 249 #define CONFIG_INITRD_TAG 250 #define CONFIG_BOOTCOMMAND "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm" 251 #if defined(CONFIG_CMD_NAND) 252 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 253 "root=/dev/mtdblock0 " \ 254 MTDPARTS_DEFAULT \ 255 " rw rootfstype=jffs2" 256 #endif 257 258 /* Misc. u-boot settings */ 259 #define CONFIG_SYS_PROMPT "U-Boot> " 260 #define CONFIG_SYS_HUSH_PARSER 261 #define CONFIG_SYS_CBSIZE 256 262 #define CONFIG_SYS_MAXARGS 16 263 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ 264 + sizeof(CONFIG_SYS_PROMPT)) 265 #define CONFIG_SYS_LONGHELP 266 #define CONFIG_CMDLINE_EDITING 267 268 #endif 269