1 /* 2 * (C) Copyright 2011 3 * egnite GmbH <info@egnite.de> 4 * 5 * Configuation settings for Ethernut 5 with AT91SAM9XE. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include <asm/hardware.h> 14 15 /* The first stage boot loader expects u-boot running at this address. */ 16 #define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */ 17 18 /* The first stage boot loader takes care of low level initialization. */ 19 #define CONFIG_SKIP_LOWLEVEL_INIT 20 21 /* Set our official architecture number. */ 22 #define MACH_TYPE_ETHERNUT5 1971 23 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 24 25 /* CPU information */ 26 #define CONFIG_ARCH_CPU_INIT 27 28 /* ARM asynchronous clock */ 29 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 30 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ 31 32 /* 32kB internal SRAM */ 33 #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ 34 #define CONFIG_SRAM_SIZE (32 << 10) 35 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \ 36 GENERATED_GBL_DATA_SIZE) 37 38 /* 128MB SDRAM in 1 bank */ 39 #define CONFIG_NR_DRAM_BANKS 1 40 #define CONFIG_SYS_SDRAM_BASE 0x20000000 41 #define CONFIG_SYS_SDRAM_SIZE (128 << 20) 42 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE 43 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR 44 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) 45 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 46 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE \ 47 - CONFIG_SYS_MALLOC_LEN) 48 49 /* 512kB on-chip NOR flash */ 50 # define CONFIG_SYS_MAX_FLASH_BANKS 1 51 # define CONFIG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ 52 # define CONFIG_AT91_EFLASH 53 # define CONFIG_SYS_MAX_FLASH_SECT 32 54 # define CONFIG_SYS_FLASH_PROTECTION /* First stage loader in sector 0 */ 55 # define CONFIG_EFLASH_PROTSECTORS 1 56 57 /* 512kB DataFlash at NPCS0 */ 58 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 59 #define CONFIG_HAS_DATAFLASH 60 #define CONFIG_ATMEL_DATAFLASH_SPI 61 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 62 #define DATAFLASH_TCSS (0x1a << 16) 63 #define DATAFLASH_TCHS (0x1 << 24) 64 65 #define CONFIG_ENV_IS_IN_SPI_FLASH 66 #define CONFIG_ENV_OFFSET 0x3DE000 67 #define CONFIG_ENV_SECT_SIZE (132 << 10) 68 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 69 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 70 + CONFIG_ENV_OFFSET) 71 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 72 + 0x042000) 73 74 /* SPI */ 75 #define CONFIG_ATMEL_SPI 76 #define AT91_SPI_CLK 15000000 77 78 /* Serial port */ 79 #define CONFIG_ATMEL_USART 80 #define CONFIG_USART3 /* USART 3 is DBGU */ 81 #define CONFIG_BAUDRATE 115200 82 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 83 #define CONFIG_USART_ID ATMEL_ID_SYS 84 85 /* Misc. hardware drivers */ 86 #define CONFIG_AT91_GPIO 87 88 /* Command line configuration */ 89 #define CONFIG_CMD_JFFS2 90 #define CONFIG_CMD_MTDPARTS 91 #define CONFIG_CMD_NAND 92 93 #ifndef MINIMAL_LOADER 94 #define CONFIG_CMD_BSP 95 #define CONFIG_CMD_DATE 96 #define CONFIG_CMD_REISER 97 #define CONFIG_CMD_SAVES 98 #define CONFIG_CMD_UBIFS 99 #define CONFIG_CMD_UNZIP 100 #endif 101 102 /* NAND flash */ 103 #ifdef CONFIG_CMD_NAND 104 #define CONFIG_SYS_MAX_NAND_DEVICE 1 105 #define CONFIG_SYS_NAND_BASE 0x40000000 106 #define CONFIG_SYS_NAND_DBW_8 107 #define CONFIG_NAND_ATMEL 108 /* our ALE is AD21 */ 109 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 110 /* our CLE is AD22 */ 111 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 112 #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) 113 #endif 114 115 /* JFFS2 */ 116 #ifdef CONFIG_CMD_JFFS2 117 #define CONFIG_JFFS2_CMDLINE 118 #define CONFIG_JFFS2_NAND 119 #endif 120 121 /* Ethernet */ 122 #define CONFIG_NET_RETRY_COUNT 20 123 #define CONFIG_MACB 124 #define CONFIG_RMII 125 #define CONFIG_PHY_ID 0 126 #define CONFIG_MACB_SEARCH_PHY 127 128 /* MMC */ 129 #ifdef CONFIG_CMD_MMC 130 #define CONFIG_GENERIC_MMC 131 #define CONFIG_GENERIC_ATMEL_MCI 132 #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 133 #endif 134 135 /* USB */ 136 #ifdef CONFIG_CMD_USB 137 #define CONFIG_USB_ATMEL 138 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 139 #define CONFIG_USB_OHCI_NEW 140 #define CONFIG_SYS_USB_OHCI_CPU_INIT 141 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 142 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "host" 143 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 144 #endif 145 146 /* RTC */ 147 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP) 148 #define CONFIG_RTC_PCF8563 149 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 150 #endif 151 152 /* I2C */ 153 #define CONFIG_SYS_MAX_I2C_BUS 1 154 155 #define CONFIG_SYS_I2C 156 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 157 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 158 #define CONFIG_SYS_I2C_SOFT_SLAVE 0 159 160 #define I2C_SOFT_DECLARATIONS 161 162 #define GPIO_I2C_SCL AT91_PIO_PORTA, 24 163 #define GPIO_I2C_SDA AT91_PIO_PORTA, 23 164 165 #define I2C_INIT { \ 166 at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \ 167 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ 168 at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \ 169 at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \ 170 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ 171 } 172 173 #define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTA, 23, 0) 174 #define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTA, 23, 0) 175 #define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) 176 #define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTA, 23, bit) 177 #define I2C_DELAY udelay(100) 178 #define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23) 179 180 /* DHCP/BOOTP options */ 181 #ifdef CONFIG_CMD_DHCP 182 #define CONFIG_BOOTP_BOOTFILESIZE 183 #define CONFIG_BOOTP_BOOTPATH 184 #define CONFIG_BOOTP_GATEWAY 185 #define CONFIG_BOOTP_HOSTNAME 186 #define CONFIG_SYS_AUTOLOAD "n" 187 #endif 188 189 /* File systems */ 190 #define CONFIG_MTD_DEVICE 191 #define CONFIG_MTD_PARTITIONS 192 #if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND) 193 #define MTDIDS_DEFAULT "nand0=atmel_nand" 194 #define MTDPARTS_DEFAULT "mtdparts=atmel_nand:-(root)" 195 #endif 196 #if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \ 197 defined(CONFIG_CMD_USB) || defined(CONFIG_MMC) 198 #define CONFIG_DOS_PARTITION 199 #endif 200 #define CONFIG_LZO 201 #define CONFIG_RBTREE 202 203 /* Boot command */ 204 #define CONFIG_CMDLINE_TAG 205 #define CONFIG_SETUP_MEMORY_TAGS 206 #define CONFIG_INITRD_TAG 207 #define CONFIG_BOOTCOMMAND "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm" 208 #if defined(CONFIG_CMD_NAND) 209 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 210 "root=/dev/mtdblock0 " \ 211 MTDPARTS_DEFAULT \ 212 " rw rootfstype=jffs2" 213 #endif 214 215 /* Misc. u-boot settings */ 216 #define CONFIG_SYS_CBSIZE 256 217 #define CONFIG_SYS_MAXARGS 16 218 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ 219 + sizeof(CONFIG_SYS_PROMPT)) 220 #define CONFIG_SYS_LONGHELP 221 #define CONFIG_CMDLINE_EDITING 222 223 #endif 224