1 /* 2 * Configuation settings for the ESPT-GIGA board 3 * 4 * Copyright (C) 2008 Renesas Solutions Corp. 5 * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __ESPT_H 11 #define __ESPT_H 12 13 #define CONFIG_CPU_SH7763 1 14 #define CONFIG_ESPT 1 15 #define __LITTLE_ENDIAN 1 16 17 /* 18 * Command line configuration. 19 */ 20 #define CONFIG_CMD_SDRAM 21 #define CONFIG_CMD_FLASH 22 #define CONFIG_CMD_MEMORY 23 #define CONFIG_CMD_MII 24 #define CONFIG_CMD_PING 25 #define CONFIG_CMD_ENV 26 #define CONFIG_CMD_NFS 27 #define CONFIG_CMD_SAVEENV 28 29 #define CONFIG_BOOTDELAY -1 30 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" 31 #define CONFIG_ENV_OVERWRITE 1 32 33 #define CONFIG_VERSION_VARIABLE 34 #undef CONFIG_SHOW_BOOT_PROGRESS 35 36 /* SCIF */ 37 #define CONFIG_SCIF_CONSOLE 1 38 #define CONFIG_BAUDRATE 115200 39 #define CONFIG_CONS_SCIF0 1 40 41 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 42 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 43 #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ 44 #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ 45 #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ 46 #define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments 47 passed to kernel */ 48 #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate 49 settings for this board */ 50 51 /* SDRAM */ 52 #define CONFIG_SYS_SDRAM_BASE (0x8C000000) 53 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) 54 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 55 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) 56 57 /* Flash(NOR) S29JL064H */ 58 #define CONFIG_SYS_FLASH_BASE (0xA0000000) 59 #define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) 60 #define CONFIG_SYS_MAX_FLASH_BANKS (1) 61 #define CONFIG_SYS_MAX_FLASH_SECT (150) 62 63 /* U-boot setting */ 64 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) 65 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 66 #define CONFIG_SYS_MONITOR_LEN (128 * 1024) 67 /* Size of DRAM reserved for malloc() use */ 68 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 69 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 70 71 #define CONFIG_SYS_FLASH_CFI 72 #define CONFIG_FLASH_CFI_DRIVER 73 #undef CONFIG_SYS_FLASH_QUIET_TEST 74 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 75 /* Timeout for Flash erase operations (in ms) */ 76 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) 77 /* Timeout for Flash write operations (in ms) */ 78 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) 79 /* Timeout for Flash set sector lock bit operations (in ms) */ 80 #define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) 81 /* Timeout for Flash clear lock bit operations (in ms) */ 82 #define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) 83 /* Use hardware flash sectors protection instead of U-Boot software protection */ 84 #undef CONFIG_SYS_FLASH_PROTECTION 85 #undef CONFIG_SYS_DIRECT_FLASH_TFTP 86 #define CONFIG_ENV_IS_IN_FLASH 87 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 88 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 89 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) 90 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ 91 #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 92 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) 93 #define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) 94 95 /* Clock */ 96 #define CONFIG_SYS_CLK_FREQ 66666666 97 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 98 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 99 #define CONFIG_SYS_TMU_CLK_DIV 4 100 101 /* Ether */ 102 #define CONFIG_SH_ETHER 1 103 #define CONFIG_SH_ETHER_USE_PORT (1) 104 #define CONFIG_SH_ETHER_PHY_ADDR (0x00) 105 #define CONFIG_PHYLIB 106 #define CONFIG_BITBANGMII 107 #define CONFIG_BITBANGMII_MULTI 108 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII 109 110 #endif /* __SH7763RDP_H */ 111