1 /* 2 * Configuation settings for the ESPT-GIGA board 3 * 4 * Copyright (C) 2008 Renesas Solutions Corp. 5 * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __ESPT_H 11 #define __ESPT_H 12 13 #define CONFIG_CPU_SH7763 1 14 #define __LITTLE_ENDIAN 1 15 16 #define CONFIG_ENV_OVERWRITE 1 17 18 #define CONFIG_DISPLAY_BOARDINFO 19 #undef CONFIG_SHOW_BOOT_PROGRESS 20 21 /* SCIF */ 22 #define CONFIG_CONS_SCIF0 1 23 24 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 25 #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ 26 #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate 27 settings for this board */ 28 29 /* SDRAM */ 30 #define CONFIG_SYS_SDRAM_BASE (0x8C000000) 31 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) 32 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) 33 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) 34 35 /* Flash(NOR) S29JL064H */ 36 #define CONFIG_SYS_FLASH_BASE (0xA0000000) 37 #define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) 38 #define CONFIG_SYS_MAX_FLASH_BANKS (1) 39 #define CONFIG_SYS_MAX_FLASH_SECT (150) 40 41 /* U-Boot setting */ 42 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) 43 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) 44 #define CONFIG_SYS_MONITOR_LEN (128 * 1024) 45 /* Size of DRAM reserved for malloc() use */ 46 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 47 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) 48 49 #define CONFIG_SYS_FLASH_CFI 50 #define CONFIG_FLASH_CFI_DRIVER 51 #undef CONFIG_SYS_FLASH_QUIET_TEST 52 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 53 /* Timeout for Flash erase operations (in ms) */ 54 #define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) 55 /* Timeout for Flash write operations (in ms) */ 56 #define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) 57 /* Timeout for Flash set sector lock bit operations (in ms) */ 58 #define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) 59 /* Timeout for Flash clear lock bit operations (in ms) */ 60 #define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) 61 /* Use hardware flash sectors protection instead of U-Boot software protection */ 62 #undef CONFIG_SYS_FLASH_PROTECTION 63 #undef CONFIG_SYS_DIRECT_FLASH_TFTP 64 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 65 #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) 66 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) 67 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ 68 #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 69 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) 70 #define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) 71 72 /* Clock */ 73 #define CONFIG_SYS_CLK_FREQ 66666666 74 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ 75 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ 76 #define CONFIG_SYS_TMU_CLK_DIV 4 77 78 /* Ether */ 79 #define CONFIG_SH_ETHER_USE_PORT (1) 80 #define CONFIG_SH_ETHER_PHY_ADDR (0x00) 81 #define CONFIG_BITBANGMII 82 #define CONFIG_BITBANGMII_MULTI 83 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII 84 85 #endif /* __SH7763RDP_H */ 86