xref: /openbmc/u-boot/include/configs/espt.h (revision 39245c86)
1 /*
2  * Configuation settings for the ESPT-GIGA board
3  *
4  * Copyright (C) 2008 Renesas Solutions Corp.
5  * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __ESPT_H
11 #define __ESPT_H
12 
13 #define CONFIG_SH		1
14 #define CONFIG_SH4		1
15 #define CONFIG_CPU_SH7763	1
16 #define CONFIG_ESPT	1
17 #define __LITTLE_ENDIAN		1
18 
19 /*
20  * Command line configuration.
21  */
22 #define CONFIG_CMD_SDRAM
23 #define CONFIG_CMD_FLASH
24 #define CONFIG_CMD_MEMORY
25 #define CONFIG_CMD_NET
26 #define CONFIG_CMD_MII
27 #define CONFIG_CMD_PING
28 #define CONFIG_CMD_ENV
29 #define CONFIG_CMD_NFS
30 #define CONFIG_CMD_SAVEENV
31 
32 #define CONFIG_BOOTDELAY        -1
33 #define CONFIG_BOOTARGS         "console=ttySC0,115200 root=1f01"
34 #define CONFIG_ENV_OVERWRITE    1
35 
36 #define CONFIG_VERSION_VARIABLE
37 #undef  CONFIG_SHOW_BOOT_PROGRESS
38 
39 /* SCIF */
40 #define CONFIG_SCIF_CONSOLE		1
41 #define CONFIG_BAUDRATE         115200
42 #define CONFIG_CONS_SCIF0		1
43 
44 #define CONFIG_SYS_TEXT_BASE	0x8FFC0000
45 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
46 #define CONFIG_SYS_CBSIZE		256	/* Buffer size for input from the Console */
47 #define CONFIG_SYS_PBSIZE		256	/* Buffer size for Console output */
48 #define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
49 #define CONFIG_SYS_BARGSIZE	512	/* Buffer size for Boot Arguments
50 								passed to kernel */
51 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
52 												settings for this board */
53 
54 /* SDRAM */
55 #define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
56 #define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
57 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
58 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
59 
60 /* Flash(NOR) S29JL064H */
61 #define CONFIG_SYS_FLASH_BASE		(0xA0000000)
62 #define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
63 #define CONFIG_SYS_MAX_FLASH_BANKS (1)
64 #define CONFIG_SYS_MAX_FLASH_SECT  (150)
65 
66 /* U-boot setting */
67 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
68 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
69 #define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
70 /* Size of DRAM reserved for malloc() use */
71 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
72 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
73 
74 #define CONFIG_SYS_FLASH_CFI
75 #define CONFIG_FLASH_CFI_DRIVER
76 #undef  CONFIG_SYS_FLASH_QUIET_TEST
77 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
78 /* Timeout for Flash erase operations (in ms) */
79 #define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
80 /* Timeout for Flash write operations (in ms) */
81 #define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
82 /* Timeout for Flash set sector lock bit operations (in ms) */
83 #define CONFIG_SYS_FLASH_LOCK_TOUT		(3 * 1000)
84 /* Timeout for Flash clear lock bit operations (in ms) */
85 #define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
86 /* Use hardware flash sectors protection instead of U-Boot software protection */
87 #undef  CONFIG_SYS_FLASH_PROTECTION
88 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
89 #define CONFIG_ENV_IS_IN_FLASH
90 #define CONFIG_ENV_SECT_SIZE	(128 * 1024)
91 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
92 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
93 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
94 #define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
95 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
96 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
97 
98 /* Clock */
99 #define CONFIG_SYS_CLK_FREQ	66666666
100 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
101 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
102 #define CONFIG_SYS_TMU_CLK_DIV      4
103 
104 /* Ether */
105 #define CONFIG_SH_ETHER 1
106 #define CONFIG_SH_ETHER_USE_PORT (1)
107 #define CONFIG_SH_ETHER_PHY_ADDR (0x00)
108 #define CONFIG_PHYLIB
109 #define CONFIG_BITBANGMII
110 #define CONFIG_BITBANGMII_MULTI
111 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
112 
113 #endif /* __SH7763RDP_H */
114