1 /* 2 * Copyright (C) 2014 Eukréa Electromatique 3 * Author: Eric Bénard <eric@eukrea.com> 4 * 5 * Configuration settings for the Embest RIoTboard 6 * 7 * based on mx6*sabre*.h which are : 8 * Copyright (C) 2012 Freescale Semiconductor, Inc. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __RIOTBOARD_CONFIG_H 14 #define __RIOTBOARD_CONFIG_H 15 16 #define CONFIG_MXC_UART_BASE UART2_BASE 17 #define CONFIG_CONSOLE_DEV "ttymxc1" 18 #define CONFIG_MMCROOT "/dev/mmcblk1p2" 19 20 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) 21 22 #define CONFIG_IMX6_THERMAL 23 24 /* Size of malloc() pool */ 25 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 26 27 #define CONFIG_BOARD_EARLY_INIT_F 28 #define CONFIG_BOARD_LATE_INIT 29 30 #define CONFIG_MXC_UART 31 32 /* I2C Configs */ 33 #define CONFIG_CMD_I2C 34 #define CONFIG_SYS_I2C 35 #define CONFIG_SYS_I2C_MXC 36 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 37 #define CONFIG_SYS_I2C_SPEED 100000 38 39 /* USB Configs */ 40 #define CONFIG_CMD_USB 41 #define CONFIG_USB_EHCI 42 #define CONFIG_USB_EHCI_MX6 43 #define CONFIG_USB_STORAGE 44 #define CONFIG_USB_HOST_ETHER 45 #define CONFIG_USB_ETHER_ASIX 46 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 48 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 49 #define CONFIG_MXC_USB_FLAGS 0 50 51 /* MMC Configs */ 52 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 53 54 #define CONFIG_FEC_MXC 55 #define CONFIG_MII 56 #define IMX_FEC_BASE ENET_BASE_ADDR 57 #define CONFIG_FEC_XCV_TYPE RGMII 58 #define CONFIG_ETHPRIME "FEC" 59 #define CONFIG_FEC_MXC_PHYADDR 4 60 61 #define CONFIG_PHYLIB 62 #define CONFIG_PHY_ATHEROS 63 64 #define CONFIG_CMD_SF 65 #ifdef CONFIG_CMD_SF 66 #define CONFIG_SPI_FLASH_SST 67 #define CONFIG_MXC_SPI 68 #define CONFIG_SF_DEFAULT_BUS 0 69 #define CONFIG_SF_DEFAULT_CS 0 70 #define CONFIG_SF_DEFAULT_SPEED 20000000 71 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 72 #endif 73 74 #define CONFIG_CMD_BMODE 75 76 #define CONFIG_ARP_TIMEOUT 200UL 77 78 /* Print Buffer Size */ 79 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 80 81 #define CONFIG_SYS_MEMTEST_START 0x10000000 82 #define CONFIG_SYS_MEMTEST_END 0x10010000 83 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 84 85 #define CONFIG_STACKSIZE (128 * 1024) 86 87 /* Physical Memory Map */ 88 #define CONFIG_NR_DRAM_BANKS 1 89 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 90 91 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 92 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 93 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 94 95 #define CONFIG_SYS_INIT_SP_OFFSET \ 96 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 97 #define CONFIG_SYS_INIT_SP_ADDR \ 98 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 99 100 /* Environment organization */ 101 #define CONFIG_ENV_SIZE (8 * 1024) 102 103 #if defined(CONFIG_ENV_IS_IN_MMC) 104 /* RiOTboard */ 105 #define CONFIG_FDTFILE "imx6dl-riotboard.dtb" 106 #define CONFIG_SYS_FSL_USDHC_NUM 3 107 #define CONFIG_SYS_MMC_ENV_DEV 2 /* SDHC4 */ 108 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 109 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 110 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) 111 /* MarSBoard */ 112 #define CONFIG_FDTFILE "imx6q-marsboard.dtb" 113 #define CONFIG_SYS_FSL_USDHC_NUM 2 114 #define CONFIG_ENV_OFFSET (768 * 1024) 115 #define CONFIG_ENV_SECT_SIZE (8 * 1024) 116 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 117 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 118 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 119 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 120 #endif 121 122 /* Framebuffer */ 123 #define CONFIG_VIDEO 124 #define CONFIG_VIDEO_IPUV3 125 #define CONFIG_CFB_CONSOLE 126 #define CONFIG_VGA_AS_SINGLE_DEVICE 127 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 128 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 129 #define CONFIG_VIDEO_BMP_RLE8 130 #define CONFIG_SPLASH_SCREEN 131 #define CONFIG_SPLASH_SCREEN_ALIGN 132 #define CONFIG_BMP_16BPP 133 #define CONFIG_VIDEO_LOGO 134 #define CONFIG_VIDEO_BMP_LOGO 135 #define CONFIG_IPUV3_CLK 260000000 136 #define CONFIG_IMX_HDMI 137 #define CONFIG_IMX_VIDEO_SKIP 138 139 #include <config_distro_defaults.h> 140 #include "mx6_common.h" 141 142 /* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 143 * 1M script, 1M pxe and the ramdisk at the end */ 144 #define MEM_LAYOUT_ENV_SETTINGS \ 145 "bootm_size=0x10000000\0" \ 146 "kernel_addr_r=0x12000000\0" \ 147 "fdt_addr_r=0x13000000\0" \ 148 "scriptaddr=0x13100000\0" \ 149 "pxefile_addr_r=0x13200000\0" \ 150 "ramdisk_addr_r=0x13300000\0" 151 152 #define BOOT_TARGET_DEVICES(func) \ 153 func(MMC, mmc, 0) \ 154 func(MMC, mmc, 1) \ 155 func(MMC, mmc, 2) \ 156 func(USB, usb, 0) \ 157 func(PXE, pxe, na) \ 158 func(DHCP, dhcp, na) 159 160 #include <config_distro_bootcmd.h> 161 162 #define CONSOLE_STDIN_SETTINGS \ 163 "stdin=serial\0" 164 165 #define CONSOLE_STDOUT_SETTINGS \ 166 "stdout=serial\0" \ 167 "stderr=serial\0" 168 169 #define CONSOLE_ENV_SETTINGS \ 170 CONSOLE_STDIN_SETTINGS \ 171 CONSOLE_STDOUT_SETTINGS 172 173 #define CONFIG_EXTRA_ENV_SETTINGS \ 174 CONSOLE_ENV_SETTINGS \ 175 MEM_LAYOUT_ENV_SETTINGS \ 176 "fdtfile=" CONFIG_FDTFILE "\0" \ 177 BOOTENV 178 179 #endif /* __RIOTBOARD_CONFIG_H */ 180