xref: /openbmc/u-boot/include/configs/edb93xx.h (revision daa483de)
1 /*
2  * U-Boot - Configuration file for Cirrus Logic EDB93xx boards
3  */
4 
5 #ifndef __CONFIG_H
6 #define __CONFIG_H
7 
8 #ifdef CONFIG_MK_edb9301
9 #define CONFIG_EDB9301
10 #elif defined(CONFIG_MK_edb9302)
11 #define CONFIG_EDB9302
12 #elif defined(CONFIG_MK_edb9302a)
13 #define CONFIG_EDB9302A
14 #elif defined(CONFIG_MK_edb9307)
15 #define CONFIG_EDB9307
16 #elif defined(CONFIG_MK_edb9307a)
17 #define CONFIG_EDB9307A
18 #elif defined(CONFIG_MK_edb9312)
19 #define CONFIG_EDB9312
20 #elif defined(CONFIG_MK_edb9315)
21 #define CONFIG_EDB9315
22 #elif defined(CONFIG_MK_edb9315a)
23 #define CONFIG_EDB9315A
24 #else
25 #error "no board defined"
26 #endif
27 
28 /* Initial environment and monitor configuration options. */
29 #define CONFIG_CMDLINE_TAG		1
30 #define CONFIG_INITRD_TAG		1
31 #define CONFIG_SETUP_MEMORY_TAGS	1
32 #define CONFIG_BOOTARGS		"root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
33 #define CONFIG_BOOTFILE		"edb93xx.img"
34 
35 #define CONFIG_SYS_LDSCRIPT	"board/cirrus/edb93xx/u-boot.lds"
36 
37 #ifdef CONFIG_EDB9301
38 #define CONFIG_EP9301
39 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9301
40 #define CONFIG_ENV_SECT_SIZE		0x00020000
41 #elif defined(CONFIG_EDB9302)
42 #define CONFIG_EP9302
43 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302
44 #define CONFIG_ENV_SECT_SIZE		0x00020000
45 #elif defined(CONFIG_EDB9302A)
46 #define CONFIG_EP9302
47 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302A
48 #define CONFIG_ENV_SECT_SIZE		0x00020000
49 #elif defined(CONFIG_EDB9307)
50 #define CONFIG_EP9307
51 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307
52 #define CONFIG_ENV_SECT_SIZE		0x00040000
53 #elif defined(CONFIG_EDB9307A)
54 #define CONFIG_EP9307
55 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307A
56 #define CONFIG_ENV_SECT_SIZE		0x00020000
57 #elif defined(CONFIG_EDB9312)
58 #define CONFIG_EP9312
59 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9312
60 #define CONFIG_ENV_SECT_SIZE		0x00040000
61 #elif defined(CONFIG_EDB9315)
62 #define CONFIG_EP9315
63 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315
64 #define CONFIG_ENV_SECT_SIZE		0x00040000
65 #elif defined(CONFIG_EDB9315A)
66 #define CONFIG_EP9315
67 #define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315A
68 #define CONFIG_ENV_SECT_SIZE		0x00020000
69 #else
70 #error "no board defined"
71 #endif
72 
73 /* High-level configuration options */
74 #define CONFIG_EP93XX		1		/* This is a Cirrus Logic 93xx SoC */
75 
76 #define CONFIG_SYS_CLK_FREQ	14745600	/* EP93xx has a 14.7456 clock */
77 #undef CONFIG_USE_IRQ				/* Don't need IRQ/FIQ */
78 
79 /* Monitor configuration */
80 #undef CONFIG_CMD_DATE
81 #define CONFIG_CMD_JFFS2
82 
83 #define CONFIG_SYS_LONGHELP			/* Enable "long" help in mon */
84 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O buffer size */
85 /* Print buffer size */
86 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
87 /* Boot argument buffer size */
88 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
89 #define CONFIG_SYS_MAXARGS	16		/* Max number of command args */
90 
91 /* Serial port hardware configuration */
92 #define CONFIG_PL010_SERIAL
93 #define CONFIG_CONS_INDEX		0
94 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, \
95                         115200, 230400}
96 #define CONFIG_SYS_SERIAL0		0x808C0000
97 #define CONFIG_SYS_SERIAL1		0x808D0000
98 /*#define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0, \
99             (void *)CONFIG_SYS_SERIAL1} */
100 
101 #define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0}
102 
103 /* Status LED */
104 /* Optional value */
105 
106 /* Network hardware configuration */
107 #define CONFIG_DRIVER_EP93XX_MAC
108 #define CONFIG_MII_SUPPRESS_PREAMBLE
109 #define CONFIG_MII
110 #define CONFIG_PHY_ADDR		1
111 #undef CONFIG_NETCONSOLE
112 
113 /* SDRAM configuration */
114 #if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
115     defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
116     defined(CONFIG_EDB9315)
117 /*
118  * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
119  * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
120  * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
121  *
122  * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
123  * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
124  * 64 MB of SDRAM.
125  */
126 
127 #define CONFIG_EDB93XX_SDCS3
128 
129 #elif defined(CONFIG_EDB9302A) || \
130     defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
131 /*
132  * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
133  * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
134  * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
135  *
136  * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
137  * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
138  */
139 #define CONFIG_EDB93XX_SDCS0
140 
141 #else
142 #error "no SDCS configuration for this board"
143 #endif
144 
145 #if defined(CONFIG_EDB93XX_SDCS3)
146 #define CONFIG_SYS_LOAD_ADDR	0x01000000	/* Default load address	*/
147 #define PHYS_SDRAM_1		0x00000000
148 #elif defined(CONFIG_EDB93XX_SDCS0)
149 #define CONFIG_SYS_LOAD_ADDR	0xc1000000	/* Default load address	*/
150 #define PHYS_SDRAM_1		0xc0000000
151 #endif
152 
153 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
154 #define CONFIG_NR_DRAM_BANKS		8
155 
156 #define CONFIG_SYS_INIT_SP_ADDR \
157     (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE)
158 
159 /* Must match kernel config */
160 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
161 
162 /* Run-time memory allocatons */
163 #define CONFIG_SYS_GBL_DATA_SIZE	128
164 #define CONFIG_STACKSIZE		(128 * 1024)
165 
166 #if defined(CONFIG_USE_IRQ)
167 #define CONFIG_STACKSIZE_IRQ	(4 * 1024)
168 #define CONFIG_STACKSIZE_FIQ	(4 * 1024)
169 #endif
170 
171 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
172 
173 /* -----------------------------------------------------------------------------
174  * FLASH and environment organization
175  *
176  * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at
177  * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit
178  * data bus, for a total of 16 MB of CFI-compatible flash.
179  *
180  * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at
181  * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
182  * data bus, for a total of 32 MB of CFI-compatible flash.
183  *
184  *
185  *                            EDB9301/02(a)7a/15a    EDB9307/12/15
186  * 0x60000000 - 0x0003FFFF    u-boot                 u-boot
187  * 0x60040000 - 0x0005FFFF    environment #1         environment #1
188  * 0x60060000 - 0x0007FFFF    environment #2         environment #1 (continued)
189  * 0x60080000 - 0x0009FFFF    unused                 environment #2
190  * 0x600A0000 - 0x000BFFFF    unused                 environment #2 (continued)
191  * 0x600C0000 - 0x00FFFFFF    unused                 unused
192  * 0x61000000 - 0x01FFFFFF    not present            unused
193  */
194 #define CONFIG_SYS_FLASH_CFI
195 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
196 
197 #define CONFIG_SYS_FLASH_PROTECTION
198 #define CONFIG_FLASH_CFI_DRIVER
199 #define CONFIG_SYS_MAX_FLASH_BANKS	1
200 #define CONFIG_SYS_MAX_FLASH_SECT	(256+8)
201 
202 #define CONFIG_SYS_TEXT_BASE		0x60000000
203 #define PHYS_FLASH_1			CONFIG_SYS_TEXT_BASE
204 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_TEXT_BASE
205 
206 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
207 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
208 
209 #define CONFIG_ENV_OVERWRITE		/* Vendor params unprotected */
210 #define CONFIG_ENV_IS_IN_FLASH
211 
212 #define CONFIG_ENV_ADDR			0x60040000
213 #define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
214 
215 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
216 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
217 
218 #define CONFIG_USB_OHCI_NEW
219 #define CONFIG_USB_OHCI_EP93XX
220 #define CONFIG_SYS_USB_OHCI_CPU_INIT
221 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
222 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ep93xx-ohci"
223 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x80020000
224 
225 /* Define to disable flash configuration*/
226 /* #define CONFIG_EP93XX_NO_FLASH_CFG */
227 
228 /* Define this for indusrial rated chips */
229 /* #define CONFIG_EDB93XX_INDUSTRIAL */
230 
231 #endif /* !defined (__CONFIG_H) */
232