1 /* 2 * U-Boot - Configuration file for Cirrus Logic EDB93xx boards 3 */ 4 5 #ifndef __CONFIG_H 6 #define __CONFIG_H 7 8 #ifdef CONFIG_MK_edb9301 9 #define CONFIG_EDB9301 10 #elif defined(CONFIG_MK_edb9302) 11 #define CONFIG_EDB9302 12 #elif defined(CONFIG_MK_edb9302a) 13 #define CONFIG_EDB9302A 14 #elif defined(CONFIG_MK_edb9307) 15 #define CONFIG_EDB9307 16 #elif defined(CONFIG_MK_edb9307a) 17 #define CONFIG_EDB9307A 18 #elif defined(CONFIG_MK_edb9312) 19 #define CONFIG_EDB9312 20 #elif defined(CONFIG_MK_edb9315) 21 #define CONFIG_EDB9315 22 #elif defined(CONFIG_MK_edb9315a) 23 #define CONFIG_EDB9315A 24 #else 25 #error "no board defined" 26 #endif 27 28 /* Initial environment and monitor configuration options. */ 29 #define CONFIG_CMDLINE_TAG 1 30 #define CONFIG_INITRD_TAG 1 31 #define CONFIG_SETUP_MEMORY_TAGS 1 32 #define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp" 33 #define CONFIG_BOOTFILE "edb93xx.img" 34 35 #define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds" 36 37 #ifdef CONFIG_EDB9301 38 #define CONFIG_EP9301 39 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9301 40 #define CONFIG_ENV_SECT_SIZE 0x00020000 41 #elif defined(CONFIG_EDB9302) 42 #define CONFIG_EP9302 43 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302 44 #define CONFIG_ENV_SECT_SIZE 0x00020000 45 #elif defined(CONFIG_EDB9302A) 46 #define CONFIG_EP9302 47 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A 48 #define CONFIG_ENV_SECT_SIZE 0x00020000 49 #elif defined(CONFIG_EDB9307) 50 #define CONFIG_EP9307 51 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307 52 #define CONFIG_ENV_SECT_SIZE 0x00040000 53 #elif defined(CONFIG_EDB9307A) 54 #define CONFIG_EP9307 55 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A 56 #define CONFIG_ENV_SECT_SIZE 0x00020000 57 #elif defined(CONFIG_EDB9312) 58 #define CONFIG_EP9312 59 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9312 60 #define CONFIG_ENV_SECT_SIZE 0x00040000 61 #elif defined(CONFIG_EDB9315) 62 #define CONFIG_EP9315 63 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315 64 #define CONFIG_ENV_SECT_SIZE 0x00040000 65 #elif defined(CONFIG_EDB9315A) 66 #define CONFIG_EP9315 67 #define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A 68 #define CONFIG_ENV_SECT_SIZE 0x00020000 69 #else 70 #error "no board defined" 71 #endif 72 73 /* High-level configuration options */ 74 #define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */ 75 76 #define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */ 77 #undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ 78 79 /* Monitor configuration */ 80 #undef CONFIG_CMD_DATE 81 #define CONFIG_CMD_JFFS2 82 83 #define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ 84 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ 85 /* Print buffer size */ 86 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 87 /* Boot argument buffer size */ 88 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 89 #define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ 90 91 /* Serial port hardware configuration */ 92 #define CONFIG_PL010_SERIAL 93 #define CONFIG_CONS_INDEX 0 94 #define CONFIG_BAUDRATE 115200 95 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \ 96 115200, 230400} 97 #define CONFIG_SYS_SERIAL0 0x808C0000 98 #define CONFIG_SYS_SERIAL1 0x808D0000 99 /*#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ 100 (void *)CONFIG_SYS_SERIAL1} */ 101 102 #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0} 103 104 /* Status LED */ 105 #define CONFIG_STATUS_LED 1 /* Status LED enabled */ 106 #define CONFIG_BOARD_SPECIFIC_LED 1 107 #define STATUS_LED_GREEN 0 108 #define STATUS_LED_RED 1 109 /* Green */ 110 #define STATUS_LED_BIT STATUS_LED_GREEN 111 #define STATUS_LED_STATE STATUS_LED_ON 112 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) 113 /* Red */ 114 #define STATUS_LED_BIT1 STATUS_LED_RED 115 #define STATUS_LED_STATE1 STATUS_LED_OFF 116 #define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) 117 /* Optional value */ 118 #define STATUS_LED_BOOT STATUS_LED_BIT 119 120 /* Network hardware configuration */ 121 #define CONFIG_DRIVER_EP93XX_MAC 122 #define CONFIG_MII_SUPPRESS_PREAMBLE 123 #define CONFIG_MII 124 #define CONFIG_PHY_ADDR 1 125 #undef CONFIG_NETCONSOLE 126 127 /* SDRAM configuration */ 128 #if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \ 129 defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \ 130 defined(CONFIG_EDB9315) 131 /* 132 * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 133 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set 134 * the SROMLL bit on the processor, resulting in this non-contiguous memory map. 135 * 136 * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of 137 * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 138 * 64 MB of SDRAM. 139 */ 140 141 #define CONFIG_EDB93XX_SDCS3 142 143 #elif defined(CONFIG_EDB9302A) || \ 144 defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A) 145 /* 146 * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75 147 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set 148 * the SROMLL bit on the processor, resulting in this non-contiguous memory map. 149 * 150 * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung 151 * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM. 152 */ 153 #define CONFIG_EDB93XX_SDCS0 154 155 #else 156 #error "no SDCS configuration for this board" 157 #endif 158 159 #if defined(CONFIG_EDB93XX_SDCS3) 160 #define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */ 161 #define PHYS_SDRAM_1 0x00000000 162 #elif defined(CONFIG_EDB93XX_SDCS0) 163 #define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* Default load address */ 164 #define PHYS_SDRAM_1 0xc0000000 165 #endif 166 167 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 168 #define CONFIG_NR_DRAM_BANKS 8 169 170 #define CONFIG_SYS_INIT_SP_ADDR \ 171 (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE) 172 173 /* Must match kernel config */ 174 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 175 176 /* Run-time memory allocatons */ 177 #define CONFIG_SYS_GBL_DATA_SIZE 128 178 #define CONFIG_STACKSIZE (128 * 1024) 179 180 #if defined(CONFIG_USE_IRQ) 181 #define CONFIG_STACKSIZE_IRQ (4 * 1024) 182 #define CONFIG_STACKSIZE_FIQ (4 * 1024) 183 #endif 184 185 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) 186 187 /* ----------------------------------------------------------------------------- 188 * FLASH and environment organization 189 * 190 * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at 191 * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit 192 * data bus, for a total of 16 MB of CFI-compatible flash. 193 * 194 * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at 195 * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit 196 * data bus, for a total of 32 MB of CFI-compatible flash. 197 * 198 * 199 * EDB9301/02(a)7a/15a EDB9307/12/15 200 * 0x60000000 - 0x0003FFFF u-boot u-boot 201 * 0x60040000 - 0x0005FFFF environment #1 environment #1 202 * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued) 203 * 0x60080000 - 0x0009FFFF unused environment #2 204 * 0x600A0000 - 0x000BFFFF unused environment #2 (continued) 205 * 0x600C0000 - 0x00FFFFFF unused unused 206 * 0x61000000 - 0x01FFFFFF not present unused 207 */ 208 #define CONFIG_SYS_FLASH_CFI 209 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 210 211 #define CONFIG_SYS_FLASH_PROTECTION 212 #define CONFIG_FLASH_CFI_DRIVER 213 #define CONFIG_SYS_MAX_FLASH_BANKS 1 214 #define CONFIG_SYS_MAX_FLASH_SECT (256+8) 215 216 #define CONFIG_SYS_TEXT_BASE 0x60000000 217 #define PHYS_FLASH_1 CONFIG_SYS_TEXT_BASE 218 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE 219 220 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 221 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) 222 223 #define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */ 224 #define CONFIG_ENV_IS_IN_FLASH 225 226 #define CONFIG_ENV_ADDR 0x60040000 227 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) 228 229 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 230 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 231 232 /* Define to enable MMC on SPI support */ 233 /* #define CONFIG_EP93XX_SPI_MMC */ 234 235 #ifdef CONFIG_EP93XX_SPI_MMC 236 #define CONFIG_EP93XX_SPI 237 #define CONFIG_MMC 238 #define CONFIG_GENERIC_MMC 239 #define CONFIG_MMC_SPI 240 #define CONFIG_MMC_SPI_NPOWER_EGPIO 9 241 #endif 242 243 #define CONFIG_USB_STORAGE 244 #define CONFIG_USB_OHCI_NEW 245 #define CONFIG_USB_OHCI_EP93XX 246 #define CONFIG_SYS_USB_OHCI_CPU_INIT 247 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 248 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci" 249 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000 250 251 #define CONFIG_BOARD_EARLY_INIT_F 252 253 /* Define to disable flash configuration*/ 254 /* #define CONFIG_EP93XX_NO_FLASH_CFG */ 255 256 /* Define this for indusrial rated chips */ 257 /* #define CONFIG_EDB93XX_INDUSTRIAL */ 258 259 #endif /* !defined (__CONFIG_H) */ 260