xref: /openbmc/u-boot/include/configs/ea20.h (revision cbcbf71b)
1 /*
2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * Based on davinci_dvevm.h. Original Copyrights follow:
5  *
6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13 
14 /*
15  * Board
16  */
17 #define CONFIG_DRIVER_TI_EMAC
18 #define CONFIG_USE_SPIFLASH
19 #define	CONFIG_SYS_USE_NAND
20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
22 #define CONFIG_PREBOOT
23 
24 /*
25  * SoC Configuration
26  */
27 #define CONFIG_MACH_DAVINCI_DA850_EVM
28 #define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
29 #define CONFIG_SOC_DA850		/* TI DA850 SoC */
30 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
31 #define CONFIG_SYS_OSCIN_FREQ		24000000
32 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
33 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
34 #define CONFIG_SKIP_LOWLEVEL_INIT
35 #define CONFIG_SYS_TEXT_BASE		0xc1080000
36 #define CONFIG_DA8XX_GPIO
37 
38 /*
39  * Memory Info
40  */
41 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 4*1024*1024) /* malloc() len */
42 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
43 #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
44 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
45 
46 /* memtest start addr */
47 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
48 
49 /* memtest will be run on 16MB */
50 #define CONFIG_SYS_MEMTEST_END	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
51 
52 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
53 
54 /*
55  * Serial Driver info
56  */
57 #define CONFIG_SYS_NS16550_SERIAL
58 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
59 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
60 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
61 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
62 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
63 
64 #define CONFIG_SPI
65 #define CONFIG_DAVINCI_SPI
66 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
67 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
68 #define CONFIG_SF_DEFAULT_SPEED		30000000
69 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
70 
71 /*
72  * I2C Configuration
73  */
74 #define CONFIG_SYS_I2C
75 #define CONFIG_SYS_I2C_DAVINCI
76 #define CONFIG_SYS_DAVINCI_I2C_SPEED		100000
77 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
78 
79 /*
80  * Network & Ethernet Configuration
81  */
82 #ifdef CONFIG_DRIVER_TI_EMAC
83 #define CONFIG_EMAC_MDIO_PHY_NUM	0
84 #define CONFIG_MII
85 #define CONFIG_BOOTP_DNS
86 #define CONFIG_BOOTP_DNS2
87 #define CONFIG_BOOTP_SEND_HOSTNAME
88 #define CONFIG_NET_RETRY_COUNT	10
89 #endif
90 
91 #ifdef CONFIG_USE_SPIFLASH
92 #undef CONFIG_ENV_IS_IN_FLASH
93 #undef CONFIG_ENV_IS_IN_NAND
94 #define CONFIG_ENV_IS_IN_SPI_FLASH
95 #define CONFIG_ENV_SIZE			(8 << 10)
96 #define CONFIG_ENV_OFFSET		0x80000
97 #define CONFIG_ENV_SECT_SIZE		(64 << 10)
98 #define CONFIG_SYS_NO_FLASH
99 #endif
100 
101 #if defined(CONFIG_VIDEO)
102 #define CONFIG_VIDEO_DA8XX
103 #define CONFIG_SPLASH_SCREEN_ALIGN
104 #define CONFIG_VIDEO_LOGO
105 #define CONFIG_VIDEO_BMP_RLE8
106 #define CONFIG_VIDEO_BMP_LOGO
107 #define CONFIG_CMD_BMP
108 #endif
109 
110 /*
111  * U-Boot general configuration
112  */
113 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
114 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
115 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
116 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
117 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
118 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
119 #define CONFIG_AUTO_COMPLETE
120 #define CONFIG_CMDLINE_EDITING
121 #define CONFIG_SYS_LONGHELP
122 #define CONFIG_CRC32_VERIFY
123 #define CONFIG_MX_CYCLIC
124 
125 /*
126  * Linux Information
127  */
128 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
129 #define CONFIG_CMDLINE_TAG
130 #define CONFIG_SETUP_MEMORY_TAGS
131 
132 /*
133  * U-Boot commands
134  */
135 #define CONFIG_CMD_ENV
136 #define CONFIG_CMD_DIAG
137 #define CONFIG_CMD_SAVES
138 
139 #ifdef CONFIG_CMD_BDI
140 #define CONFIG_CLOCKS
141 #endif
142 
143 #ifndef CONFIG_DRIVER_TI_EMAC
144 #endif
145 
146 /* NAND Setup */
147 #ifdef CONFIG_SYS_USE_NAND
148 #define CONFIG_CMD_NAND
149 
150 #define CONFIG_CMD_MTDPARTS
151 #define CONFIG_MTD_DEVICE
152 #define CONFIG_MTD_PARTITIONS
153 #define CONFIG_LZO
154 #define CONFIG_RBTREE
155 #define CONFIG_CMD_UBIFS
156 
157 #define CONFIG_NAND_DAVINCI
158 #define	CONFIG_SYS_NAND_PAGE_2K
159 #define CONFIG_SYS_NAND_NO_SUBPAGE
160 #define CONFIG_SYS_NAND_CS		2
161 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
162 #undef CONFIG_SYS_NAND_HW_ECC
163 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
164 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
165 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
166 #endif
167 
168 /* SPI Flash */
169 #ifdef CONFIG_USE_SPIFLASH
170 #endif
171 
172 #if !defined(CONFIG_SYS_USE_NAND) && \
173 	!defined(CONFIG_USE_NOR) && \
174 	!defined(CONFIG_USE_SPIFLASH)
175 #define CONFIG_ENV_IS_NOWHERE
176 #define CONFIG_SYS_NO_FLASH
177 #define CONFIG_ENV_SIZE		(16 << 10)
178 #undef CONFIG_CMD_ENV
179 #endif
180 
181 /* additions for new relocation code, must added to all boards */
182 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
183 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
184 					GENERATED_GBL_DATA_SIZE)
185 /*
186  * Default environment and default scripts
187  * to update uboot and load kernel
188  */
189 
190 #define CONFIG_HOSTNAME ea20
191 #define	CONFIG_EXTRA_ENV_SETTINGS				\
192 	"as=3\0"							\
193 	"netdev=eth0\0"						\
194 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
195 		"nfsroot=${serverip}:${rootpath}\0"			\
196 	"rfsbargs=setenv bootargs root=/dev/nfs rw "			\
197 	"nfsroot=${serverip}:${rfsbpath}\0"				\
198 	"testrfsargs=setenv bootargs root=/dev/nfs rw "		\
199 	"nfsroot=${serverip}:${testrfspath}\0"				\
200 	"ramargs=setenv bootargs root=/dev/ram rw initrd="		\
201 	"0x${ramdisk_addr_r},4M\0"					\
202 	"mtdids=nand0=davinci_nand.0\0"				\
203 	"serverip=192.168.5.249\0"					\
204 	"ipaddr=192.168.5.248\0"					\
205 	"rootpath=/opt/eldk/arm\0"					\
206 	"splashpos=230,180\0"						\
207 	"testrfspath=/opt/eldk/test_arm\0"				\
208 	"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "	\
209 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
210 	"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "	\
211 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
212 	"addip_sta=setenv bootargs ${bootargs} "			\
213 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
214 		":${hostname}:${netdev}:off panic=1\0"			\
215 	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
216 	"addip=if test -n ${ipdyn};then run addip_dyn;"		\
217 		"else run addip_sta;fi\0"				\
218 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
219 	"addtty=setenv bootargs ${bootargs}"				\
220 		" console=${consoledev},${baudrate}n8\0"		\
221 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"		\
222 	"addmem=setenv bootargs ${bootargs} mem=${memory}\0"		\
223 	"consoledev=ttyS0\0"						\
224 	"loadaddr=c0000014\0"						\
225 	"memory=32M\0"							\
226 	"kernel_addr_r=c0700000\0"					\
227 	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
228 	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
229 	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"	\
230 	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
231 			"bootm ${kernel_addr_r}\0"			\
232 	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
233 		"bootm ${kernel_addr}\0"				\
234 	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
235 		"run nfsargs addip addtty addmtd addmisc addmem;"	\
236 		"bootm ${kernel_addr_r}\0"				\
237 	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "			\
238 		"run rfsbargs addip addtty addmtd addmisc addmem; "	\
239 		"bootm ${kernel_addr_r}\0"				\
240 	"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "		\
241 		"run testrfsargs addip addtty addmtd addmisc addmem; "	\
242 		"bootm ${kernel_addr_r}\0"				\
243 	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
244 		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
245 	"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
246 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
247 		"ubifsumount; run nandargs addip addtty "		\
248 		"addmtd addmisc addmem;clrlogo;"			\
249 		"bootm ${kernel_addr_r}\0"				\
250 	"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"	\
251 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
252 		"ubifsumount; run nandrwargs addip addtty "		\
253 		"addmtd addmisc addmem;clrlogo;"			\
254 		"bootm ${kernel_addr_r}\0"				\
255 	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
256 		" addip addtty addmtd addmisc addmem;"			\
257 		"clrlogo;bootm ${kernel_addr_r}\0"			\
258 	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
259 	"load_magic=if sf probe 0;then sf "				\
260 		"read c0000000 0x10000 0x60000;fi\0"			\
261 	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
262 		"if ubifsload c0000014 /boot/u-boot.bin;"		\
263 		"then mw c0000008 ${filesize};else echo Error reading"	\
264 		" u-boot from nand!;fi\0"				\
265 	"load_net=if sf probe 0;then sf read c0000000 0x10000 "	\
266 		"0x60000;tftp c0000014 ${u-boot};"			\
267 		"mw c0000008 ${filesize};fi\0"				\
268 	"upd=if sf probe 0;then sf erase 10000 60000;"			\
269 		"sf write c0000000 10000 60000;fi\0"			\
270 	"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "	\
271 		"sf erase 0 10000;"					\
272 		"sf write 0xc0700000 0 ${filesize};fi\0"		\
273 	"ubootupd_net=if run load_net;then echo Updating u-boot;"	\
274 		"if run upd; then echo U-Boot updated;"		\
275 			"else echo Error updating u-boot !;"		\
276 			"echo Board without bootloader !!;"		\
277 		"fi;"							\
278 		"else echo U-Boot not downloaded..exiting;fi\0"	\
279 	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"	\
280 	"bootcmd=run net_testrfs\0"
281 
282 #endif /* __CONFIG_H */
283