xref: /openbmc/u-boot/include/configs/ea20.h (revision ad5b5801)
1 /*
2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * Based on davinci_dvevm.h. Original Copyrights follow:
5  *
6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13 
14 /*
15  * Board
16  */
17 #define CONFIG_DRIVER_TI_EMAC
18 #define CONFIG_USE_SPIFLASH
19 #define	CONFIG_SYS_USE_NAND
20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
22 #define CONFIG_BOARD_EARLY_INIT_F
23 #define CONFIG_BOARD_LATE_INIT
24 #define CONFIG_VIDEO
25 #define CONFIG_PREBOOT
26 
27 /*
28  * SoC Configuration
29  */
30 #define CONFIG_MACH_DAVINCI_DA850_EVM
31 #define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
32 #define CONFIG_SOC_DA850		/* TI DA850 SoC */
33 #define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
34 #define CONFIG_SYS_OSCIN_FREQ		24000000
35 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
36 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
37 #define CONFIG_SKIP_LOWLEVEL_INIT
38 #define CONFIG_SYS_TEXT_BASE		0xc1080000
39 #define CONFIG_DA8XX_GPIO
40 
41 /*
42  * Memory Info
43  */
44 #define CONFIG_SYS_MALLOC_LEN	(0x10000 + 4*1024*1024) /* malloc() len */
45 #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
46 #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
47 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
48 
49 /* memtest start addr */
50 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
51 
52 /* memtest will be run on 16MB */
53 #define CONFIG_SYS_MEMTEST_END	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
54 
55 #define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
56 
57 /*
58  * Serial Driver info
59  */
60 #define CONFIG_SYS_NS16550_SERIAL
61 #define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
62 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
63 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
64 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
65 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
66 
67 #define CONFIG_SPI
68 #define CONFIG_DAVINCI_SPI
69 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
70 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
71 #define CONFIG_SF_DEFAULT_SPEED		30000000
72 #define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
73 
74 /*
75  * I2C Configuration
76  */
77 #define CONFIG_SYS_I2C
78 #define CONFIG_SYS_I2C_DAVINCI
79 #define CONFIG_SYS_DAVINCI_I2C_SPEED		100000
80 #define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
81 
82 /*
83  * Network & Ethernet Configuration
84  */
85 #ifdef CONFIG_DRIVER_TI_EMAC
86 #define CONFIG_EMAC_MDIO_PHY_NUM	0
87 #define CONFIG_MII
88 #define CONFIG_BOOTP_DNS
89 #define CONFIG_BOOTP_DNS2
90 #define CONFIG_BOOTP_SEND_HOSTNAME
91 #define CONFIG_NET_RETRY_COUNT	10
92 #endif
93 
94 #ifdef CONFIG_USE_SPIFLASH
95 #undef CONFIG_ENV_IS_IN_FLASH
96 #undef CONFIG_ENV_IS_IN_NAND
97 #define CONFIG_ENV_IS_IN_SPI_FLASH
98 #define CONFIG_ENV_SIZE			(8 << 10)
99 #define CONFIG_ENV_OFFSET		0x80000
100 #define CONFIG_ENV_SECT_SIZE		(64 << 10)
101 #define CONFIG_SYS_NO_FLASH
102 #endif
103 
104 #if defined(CONFIG_VIDEO)
105 #define CONFIG_VIDEO_DA8XX
106 #define CONFIG_CFB_CONSOLE
107 #define CONFIG_VGA_AS_SINGLE_DEVICE
108 #define CONFIG_SPLASH_SCREEN_ALIGN
109 #define CONFIG_VIDEO_LOGO
110 #define CONFIG_SYS_CONSOLE_INFO_QUIET
111 #define CONFIG_VIDEO_BMP_RLE8
112 #define CONFIG_VIDEO_BMP_LOGO
113 #define CONFIG_CMD_BMP
114 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
115 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
116 #endif
117 
118 /*
119  * U-Boot general configuration
120  */
121 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
122 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
123 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
124 #define CONFIG_SYS_MAXARGS	16 /* max number of command args */
125 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
126 #define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
127 #define CONFIG_VERSION_VARIABLE
128 #define CONFIG_AUTO_COMPLETE
129 #define CONFIG_CMDLINE_EDITING
130 #define CONFIG_SYS_LONGHELP
131 #define CONFIG_CRC32_VERIFY
132 #define CONFIG_MX_CYCLIC
133 
134 /*
135  * Linux Information
136  */
137 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
138 #define CONFIG_CMDLINE_TAG
139 #define CONFIG_SETUP_MEMORY_TAGS
140 #define CONFIG_BOOTDELAY	3
141 
142 /*
143  * U-Boot commands
144  */
145 #define CONFIG_CMD_ENV
146 #define CONFIG_CMD_DIAG
147 #define CONFIG_CMD_SAVES
148 
149 #ifdef CONFIG_CMD_BDI
150 #define CONFIG_CLOCKS
151 #endif
152 
153 #ifndef CONFIG_DRIVER_TI_EMAC
154 #endif
155 
156 /* NAND Setup */
157 #ifdef CONFIG_SYS_USE_NAND
158 #define CONFIG_CMD_NAND
159 
160 #define CONFIG_CMD_MTDPARTS
161 #define CONFIG_MTD_DEVICE
162 #define CONFIG_MTD_PARTITIONS
163 #define CONFIG_LZO
164 #define CONFIG_RBTREE
165 #define CONFIG_CMD_UBI
166 #define CONFIG_CMD_UBIFS
167 
168 #define CONFIG_NAND_DAVINCI
169 #define	CONFIG_SYS_NAND_PAGE_2K
170 #define CONFIG_SYS_NAND_NO_SUBPAGE
171 #define CONFIG_SYS_NAND_CS		2
172 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
173 #undef CONFIG_SYS_NAND_HW_ECC
174 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
175 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
176 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
177 #endif
178 
179 /* SPI Flash */
180 #ifdef CONFIG_USE_SPIFLASH
181 #endif
182 
183 #if !defined(CONFIG_SYS_USE_NAND) && \
184 	!defined(CONFIG_USE_NOR) && \
185 	!defined(CONFIG_USE_SPIFLASH)
186 #define CONFIG_ENV_IS_NOWHERE
187 #define CONFIG_SYS_NO_FLASH
188 #define CONFIG_ENV_SIZE		(16 << 10)
189 #undef CONFIG_CMD_ENV
190 #endif
191 
192 /* additions for new relocation code, must added to all boards */
193 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
194 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
195 					GENERATED_GBL_DATA_SIZE)
196 /*
197  * Default environment and default scripts
198  * to update uboot and load kernel
199  */
200 
201 #define CONFIG_HOSTNAME ea20
202 #define	CONFIG_EXTRA_ENV_SETTINGS				\
203 	"as=3\0"							\
204 	"netdev=eth0\0"						\
205 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
206 		"nfsroot=${serverip}:${rootpath}\0"			\
207 	"rfsbargs=setenv bootargs root=/dev/nfs rw "			\
208 	"nfsroot=${serverip}:${rfsbpath}\0"				\
209 	"testrfsargs=setenv bootargs root=/dev/nfs rw "		\
210 	"nfsroot=${serverip}:${testrfspath}\0"				\
211 	"ramargs=setenv bootargs root=/dev/ram rw initrd="		\
212 	"0x${ramdisk_addr_r},4M\0"					\
213 	"mtdids=nand0=davinci_nand.0\0"				\
214 	"serverip=192.168.5.249\0"					\
215 	"ipaddr=192.168.5.248\0"					\
216 	"rootpath=/opt/eldk/arm\0"					\
217 	"splashpos=230,180\0"						\
218 	"testrfspath=/opt/eldk/test_arm\0"				\
219 	"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "	\
220 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
221 	"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "	\
222 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
223 	"addip_sta=setenv bootargs ${bootargs} "			\
224 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
225 		":${hostname}:${netdev}:off panic=1\0"			\
226 	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
227 	"addip=if test -n ${ipdyn};then run addip_dyn;"		\
228 		"else run addip_sta;fi\0"				\
229 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
230 	"addtty=setenv bootargs ${bootargs}"				\
231 		" console=${consoledev},${baudrate}n8\0"		\
232 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"		\
233 	"addmem=setenv bootargs ${bootargs} mem=${memory}\0"		\
234 	"consoledev=ttyS0\0"						\
235 	"loadaddr=c0000014\0"						\
236 	"memory=32M\0"							\
237 	"kernel_addr_r=c0700000\0"					\
238 	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
239 	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
240 	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"	\
241 	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
242 			"bootm ${kernel_addr_r}\0"			\
243 	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
244 		"bootm ${kernel_addr}\0"				\
245 	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
246 		"run nfsargs addip addtty addmtd addmisc addmem;"	\
247 		"bootm ${kernel_addr_r}\0"				\
248 	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "			\
249 		"run rfsbargs addip addtty addmtd addmisc addmem; "	\
250 		"bootm ${kernel_addr_r}\0"				\
251 	"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "		\
252 		"run testrfsargs addip addtty addmtd addmisc addmem; "	\
253 		"bootm ${kernel_addr_r}\0"				\
254 	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
255 		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
256 	"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
257 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
258 		"ubifsumount; run nandargs addip addtty "		\
259 		"addmtd addmisc addmem;clrlogo;"			\
260 		"bootm ${kernel_addr_r}\0"				\
261 	"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"	\
262 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
263 		"ubifsumount; run nandrwargs addip addtty "		\
264 		"addmtd addmisc addmem;clrlogo;"			\
265 		"bootm ${kernel_addr_r}\0"				\
266 	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
267 		" addip addtty addmtd addmisc addmem;"			\
268 		"clrlogo;bootm ${kernel_addr_r}\0"			\
269 	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
270 	"load_magic=if sf probe 0;then sf "				\
271 		"read c0000000 0x10000 0x60000;fi\0"			\
272 	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
273 		"if ubifsload c0000014 /boot/u-boot.bin;"		\
274 		"then mw c0000008 ${filesize};else echo Error reading"	\
275 		" u-boot from nand!;fi\0"				\
276 	"load_net=if sf probe 0;then sf read c0000000 0x10000 "	\
277 		"0x60000;tftp c0000014 ${u-boot};"			\
278 		"mw c0000008 ${filesize};fi\0"				\
279 	"upd=if sf probe 0;then sf erase 10000 60000;"			\
280 		"sf write c0000000 10000 60000;fi\0"			\
281 	"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "	\
282 		"sf erase 0 10000;"					\
283 		"sf write 0xc0700000 0 ${filesize};fi\0"		\
284 	"ubootupd_net=if run load_net;then echo Updating u-boot;"	\
285 		"if run upd; then echo U-Boot updated;"		\
286 			"else echo Error updating u-boot !;"		\
287 			"echo Board without bootloader !!;"		\
288 		"fi;"							\
289 		"else echo U-Boot not downloaded..exiting;fi\0"	\
290 	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"	\
291 	"bootcmd=run net_testrfs\0"
292 
293 #endif /* __CONFIG_H */
294