1 /* 2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * Based on davinci_dvevm.h. Original Copyrights follow: 5 * 6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * Board 16 */ 17 #define CONFIG_DRIVER_TI_EMAC 18 #define CONFIG_USE_SPIFLASH 19 #define CONFIG_SYS_USE_NAND 20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE 22 #define CONFIG_BOARD_EARLY_INIT_F 23 #define CONFIG_BOARD_LATE_INIT 24 #define CONFIG_VIDEO 25 #define CONFIG_PREBOOT 26 27 /* 28 * SoC Configuration 29 */ 30 #define CONFIG_MACH_DAVINCI_DA850_EVM 31 #define CONFIG_ARM926EJS /* arm926ejs CPU core */ 32 #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ 33 #define CONFIG_SOC_DA850 /* TI DA850 SoC */ 34 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) 35 #define CONFIG_SYS_OSCIN_FREQ 24000000 36 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE 37 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) 38 #define CONFIG_SYS_HZ 1000 39 #define CONFIG_SKIP_LOWLEVEL_INIT 40 #define CONFIG_SYS_TEXT_BASE 0xc1080000 41 #define CONFIG_DA8XX_GPIO 42 43 /* 44 * Memory Info 45 */ 46 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ 47 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ 48 #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ 49 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ 50 51 /* memtest start addr */ 52 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) 53 54 /* memtest will be run on 16MB */ 55 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) 56 57 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 58 59 /* 60 * Serial Driver info 61 */ 62 #define CONFIG_SYS_NS16550 63 #define CONFIG_SYS_NS16550_SERIAL 64 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ 65 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ 66 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) 67 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ 68 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 69 70 #define CONFIG_SPI 71 #define CONFIG_SPI_FLASH 72 #define CONFIG_SPI_FLASH_STMICRO 73 #define CONFIG_DAVINCI_SPI 74 #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE 75 #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) 76 #define CONFIG_SF_DEFAULT_SPEED 30000000 77 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 78 79 /* 80 * I2C Configuration 81 */ 82 #define CONFIG_HARD_I2C 83 #define CONFIG_DRIVER_DAVINCI_I2C 84 #define CONFIG_SYS_I2C_SPEED 100000 85 86 /* 87 * Network & Ethernet Configuration 88 */ 89 #ifdef CONFIG_DRIVER_TI_EMAC 90 #define CONFIG_EMAC_MDIO_PHY_NUM 0 91 #define CONFIG_MII 92 #define CONFIG_BOOTP_DNS 93 #define CONFIG_BOOTP_DNS2 94 #define CONFIG_BOOTP_SEND_HOSTNAME 95 #define CONFIG_NET_RETRY_COUNT 10 96 #endif 97 98 #ifdef CONFIG_USE_SPIFLASH 99 #undef CONFIG_ENV_IS_IN_FLASH 100 #undef CONFIG_ENV_IS_IN_NAND 101 #define CONFIG_ENV_IS_IN_SPI_FLASH 102 #define CONFIG_ENV_SIZE (8 << 10) 103 #define CONFIG_ENV_OFFSET 0x80000 104 #define CONFIG_ENV_SECT_SIZE (64 << 10) 105 #define CONFIG_SYS_NO_FLASH 106 #endif 107 108 109 #if defined(CONFIG_VIDEO) 110 #define CONFIG_VIDEO_DA8XX 111 #define CONFIG_CFB_CONSOLE 112 #define CONFIG_VGA_AS_SINGLE_DEVICE 113 #define CONFIG_SPLASH_SCREEN_ALIGN 114 #define CONFIG_VIDEO_LOGO 115 #define CONFIG_SYS_CONSOLE_INFO_QUIET 116 #define CONFIG_VIDEO_BMP_RLE8 117 #define CONFIG_VIDEO_BMP_LOGO 118 #define CONFIG_CMD_BMP 119 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 120 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 121 #endif 122 123 /* 124 * U-Boot general configuration 125 */ 126 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ 127 #define CONFIG_SYS_PROMPT "ea20 > " /* Command Prompt */ 128 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 129 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 130 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 131 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ 132 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) 133 #define CONFIG_VERSION_VARIABLE 134 #define CONFIG_AUTO_COMPLETE 135 #define CONFIG_SYS_HUSH_PARSER 136 #define CONFIG_CMDLINE_EDITING 137 #define CONFIG_SYS_LONGHELP 138 #define CONFIG_CRC32_VERIFY 139 #define CONFIG_MX_CYCLIC 140 141 /* 142 * Linux Information 143 */ 144 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 145 #define CONFIG_CMDLINE_TAG 146 #define CONFIG_SETUP_MEMORY_TAGS 147 #define CONFIG_BOOTDELAY 3 148 149 /* 150 * U-Boot commands 151 */ 152 #include <config_cmd_default.h> 153 #define CONFIG_CMD_ENV 154 #define CONFIG_CMD_ASKENV 155 #define CONFIG_CMD_DHCP 156 #define CONFIG_CMD_DIAG 157 #define CONFIG_CMD_MII 158 #define CONFIG_CMD_PING 159 #define CONFIG_CMD_SAVES 160 #define CONFIG_CMD_MEMORY 161 #define CONFIG_CMD_I2C 162 #define CONFIG_CMD_GPIO 163 164 #ifdef CONFIG_CMD_BDI 165 #define CONFIG_CLOCKS 166 #endif 167 168 #ifndef CONFIG_DRIVER_TI_EMAC 169 #undef CONFIG_CMD_NET 170 #undef CONFIG_CMD_DHCP 171 #undef CONFIG_CMD_MII 172 #undef CONFIG_CMD_PING 173 #endif 174 175 /* NAND Setup */ 176 #ifdef CONFIG_SYS_USE_NAND 177 #undef CONFIG_CMD_FLASH 178 #undef CONFIG_CMD_IMLS 179 #define CONFIG_CMD_NAND 180 181 #define CONFIG_CMD_MTDPARTS 182 #define CONFIG_MTD_DEVICE 183 #define CONFIG_MTD_PARTITIONS 184 #define CONFIG_LZO 185 #define CONFIG_RBTREE 186 #define CONFIG_CMD_UBI 187 #define CONFIG_CMD_UBIFS 188 189 #define CONFIG_NAND_DAVINCI 190 #define CONFIG_SYS_NAND_PAGE_2K 191 #define CONFIG_SYS_NAND_NO_SUBPAGE 192 #define CONFIG_SYS_NAND_CS 2 193 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 194 #undef CONFIG_SYS_NAND_HW_ECC 195 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST 196 #define CONFIG_SYS_NAND_USE_FLASH_BBT 197 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ 198 #endif 199 200 /* SPI Flash */ 201 #ifdef CONFIG_USE_SPIFLASH 202 #undef CONFIG_CMD_IMLS 203 #undef CONFIG_CMD_FLASH 204 #define CONFIG_CMD_SPI 205 #define CONFIG_CMD_SF 206 #define CONFIG_CMD_SAVEENV 207 #endif 208 209 #if !defined(CONFIG_SYS_USE_NAND) && \ 210 !defined(CONFIG_USE_NOR) && \ 211 !defined(CONFIG_USE_SPIFLASH) 212 #define CONFIG_ENV_IS_NOWHERE 213 #define CONFIG_SYS_NO_FLASH 214 #define CONFIG_ENV_SIZE (16 << 10) 215 #undef CONFIG_CMD_IMLS 216 #undef CONFIG_CMD_ENV 217 #endif 218 219 /* additions for new relocation code, must added to all boards */ 220 #define CONFIG_SYS_SDRAM_BASE 0xc0000000 221 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 222 GENERATED_GBL_DATA_SIZE) 223 /* 224 * Default environment and default scripts 225 * to update uboot and load kernel 226 */ 227 228 #define CONFIG_HOSTNAME ea20 229 #define CONFIG_EXTRA_ENV_SETTINGS \ 230 "as=3\0" \ 231 "netdev=eth0\0" \ 232 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 233 "nfsroot=${serverip}:${rootpath}\0" \ 234 "rfsbargs=setenv bootargs root=/dev/nfs rw " \ 235 "nfsroot=${serverip}:${rfsbpath}\0" \ 236 "testrfsargs=setenv bootargs root=/dev/nfs rw " \ 237 "nfsroot=${serverip}:${testrfspath}\0" \ 238 "ramargs=setenv bootargs root=/dev/ram rw initrd=" \ 239 "0x${ramdisk_addr_r},4M\0" \ 240 "mtdids=nand0=davinci_nand.0\0" \ 241 "serverip=192.168.5.249\0" \ 242 "ipaddr=192.168.5.248\0" \ 243 "rootpath=/opt/eldk/arm\0" \ 244 "splashpos=230,180\0" \ 245 "testrfspath=/opt/eldk/test_arm\0" \ 246 "tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0" \ 247 "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ 248 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 249 "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ 250 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 251 "addip_sta=setenv bootargs ${bootargs} " \ 252 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 253 ":${hostname}:${netdev}:off panic=1\0" \ 254 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 255 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 256 "else run addip_sta;fi\0" \ 257 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 258 "addtty=setenv bootargs ${bootargs}" \ 259 " console=${consoledev},${baudrate}n8\0" \ 260 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 261 "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ 262 "consoledev=ttyS0\0" \ 263 "loadaddr=c0000014\0" \ 264 "memory=32M\0" \ 265 "kernel_addr_r=c0700000\0" \ 266 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 267 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 268 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \ 269 "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ 270 "bootm ${kernel_addr_r}\0" \ 271 "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ 272 "bootm ${kernel_addr}\0" \ 273 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 274 "run nfsargs addip addtty addmtd addmisc addmem;" \ 275 "bootm ${kernel_addr_r}\0" \ 276 "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ 277 "run rfsbargs addip addtty addmtd addmisc addmem; " \ 278 "bootm ${kernel_addr_r}\0" \ 279 "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \ 280 "run testrfsargs addip addtty addmtd addmisc addmem; " \ 281 "bootm ${kernel_addr_r}\0" \ 282 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 283 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 284 "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 285 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 286 "ubifsumount; run nandargs addip addtty " \ 287 "addmtd addmisc addmem;clrlogo;" \ 288 "bootm ${kernel_addr_r}\0" \ 289 "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 290 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 291 "ubifsumount; run nandrwargs addip addtty " \ 292 "addmtd addmisc addmem;clrlogo;" \ 293 "bootm ${kernel_addr_r}\0" \ 294 "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \ 295 " addip addtty addmtd addmisc addmem;" \ 296 "clrlogo;bootm ${kernel_addr_r}\0" \ 297 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 298 "load_magic=if sf probe 0;then sf " \ 299 "read c0000000 0x10000 0x60000;fi\0" \ 300 "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 301 "if ubifsload c0000014 /boot/u-boot.bin;" \ 302 "then mw c0000008 ${filesize};else echo Error reading" \ 303 " u-boot from nand!;fi\0" \ 304 "load_net=if sf probe 0;then sf read c0000000 0x10000 " \ 305 "0x60000;tftp c0000014 ${u-boot};" \ 306 "mw c0000008 ${filesize};fi\0" \ 307 "upd=if sf probe 0;then sf erase 10000 60000;" \ 308 "sf write c0000000 10000 60000;fi\0" \ 309 "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \ 310 "sf erase 0 10000;" \ 311 "sf write 0xc0700000 0 ${filesize};fi\0" \ 312 "ubootupd_net=if run load_net;then echo Updating u-boot;" \ 313 "if run upd; then echo U-Boot updated;" \ 314 "else echo Error updating u-boot !;" \ 315 "echo Board without bootloader !!;" \ 316 "fi;" \ 317 "else echo U-Boot not downloaded..exiting;fi\0" \ 318 "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ 319 "bootcmd=run tempmac;run net_testrfs\0" 320 321 #endif /* __CONFIG_H */ 322